Table of Contents
Advertisement
Inserting and Removing Disc
Inserting Disc
1
Press down the DISC EJECT lever once and release
it.
A few moments after the ACCESS/PC indicator
blinks, the cover of disc insertion compartment will
open slightly.
2
Gently open the cover by hand until it stops.
3
Insert the disc, in Round DVD Holder, into the disc
guide until it stops.
Note that the recording/playback surface of disc must
face the inside of DVD Video Camera. The
orientation for inserting the disc into the disc guide is
also specific: load the disc correctly, referring to the
figure below.
DISC EJECT
lever
•
The disc exposed portion must face in the same
direction as the lens, as shown in figure.
•
The recording/playback side must face the inside of
DVD Video Camera.
46
PUSH CLOSE
portion
Disc cover
Disc guide
4
Push the section marked "PUSH CLOSE" on the
cover of disc insertion compartment, to close the
cover.
5
Turn the DVD Video Camera on (
When "DISC ACCESS" disappears, the DVD Video
Camera is ready for recording.
lIdentifying recording/playback
sides of disc:
Single sided disc:
The recording/playback side is
opposite to the printed label.
Double-sided disc:
The recording/playback side of
"SIDE A" is opposite to the
"SIDE A" marked side.
The recording/playback side of
"SIDE B" is the "SIDE A"
marked side.
Correct
orientation
Incorrect orientation
or
"SIDE A" mark
The opposite side is
the "SIDE A"
recording/playback
side.
).
- Quick Links:
- Operating Instructions
Hide quick links:
Advertisement
Table of Contents
