Table of Contents
Advertisement
1.4.
How to Discharge the E.Capacitor on Flash P.C.B. Unit
CAUTION:
• Be sure to discharge the E.Capacitor on Flash P.C.B. Unit before disassembling.
• Be careful of the high voltage circuit on Flash P.C.B. Unit when servicing.
[Discharging Procedure]
1. Put the insulation tube on the lead part of resistor (ERG5SJ102:1kΩ /5W).
(An equivalent type of resistor may be used.)
2. Put the resistor between both terminals of E.Capacitor on the Flash P.C.B. Unit for approx. 5 seconds.
3. After discharging, confirm that the E.Capacitor voltage is lower than 10V by using a voltmeter.
Fig. F1
4
Advertisement
Table of Contents
