hit counter code
Panasonic CF-M34 Series Toughbook Reference Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Desktop
  5. CF-M34 Series
  6. Reference manual

Panasonic CF-M34 Series Toughbook Reference Manual

Notebook
Hide thumbs Also See for CF-M34 Series Toughbook:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual
2000
XP
In this manual, descriptions are given us-
ing illustrations not featuring the hand
strap for convenience of explanation.
Illustrations in this Reference Manual
NOTE:
CAUTION:
WARNING:
[Start]-[Run]:
Enter :
Fn + F5 :
Windows 2000 :
Windows XP :
page:
:
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the
explanation easier to understand.
If the user has logged on without "Administrator authority," some functions may not be executable, and some
screens may be not displayed as shown in this manual. If this happens, log on with Administrator authority to
enable these functions.
We recommend that this Reference Manual be printed.
NOTE provides a useful fact or helpful information.
CAUTION indicates a condition that may result in minor or moderate injury.
WARNING indicates a hazard that may result in moderate or serious injury.
This illustration means to click [Start], then to click [Run].
(For some applications, you may need to double-click.)
This illustration means to press the [Enter] key.
This illustration means to press and hold the [Fn] key, then press the [F5] key.
Information for Microsoft Windows
Information for Microsoft Windows
When the cursor is moved to an item under [Contents] or to
shape of the cursor will change to
click is made), the corresponding page in the Reference Manual will be displayed.
This illustration means to refer to the Operating Instructions.

Reference Manual

Model No.
Contents
Key Combinations .............................................. 2
LED Indicators .................................................... 4
Touch Pad (Advanced) ....................................... 5
Touchscreen ....................................................... 9
Standby/Hibernation Functions ...................... 12
Security Measures ............................................16
Computing on the Road ...................................20
Battery Power ...................................................22
PC Cards ........................................................... 27
RAM Module ......................................................28
Port Replicator ..................................................29
External Display ...............................................30
USB Devices ..................................................... 31
Modem ............................................................... 32
LAN ....................................................................34
Accessories ......................................................36
Hard Disk Drive................................................. 37
Setup Utility ......................................................39
Technical Information ......................................44
DMI Viewer ........................................................ 45
List of Error Codes ........................................... 46
®
2000 Professional users.
®
XP Professional users.
. Under this condition, if characters are tapped (or a
Personal Computer
CF-M34
page
(green display), the
®
Series

Advertisement

Table of Contents
loading

Related Manuals for Panasonic CF-M34 Series Toughbook

Summary of Contents for Panasonic CF-M34 Series Toughbook

  • Page 1: Table Of Contents

    ® Personal Computer Reference Manual CF-M34 Series Model No. Contents Key Combinations ..........2 2000 LED Indicators ............ 4 Touch Pad (Advanced) ........5 Touchscreen ............9 Standby/Hibernation Functions ...... 12 Security Measures ..........16 Computing on the Road ........20 Battery Power ...........22 PC Cards ............

  • Page 2: Key Combinations

    Key Combinations CAUTION Do not press the following key combinations repeatedly in (quick) succession. Do not press the following key combinations while using the touch pad (mouse), touchscreen or other keys. NOTE Until you log on to Windows, the key combinations below (except for Fn + F3 ) will be inoperable and popup windows will not be displayed.
  • Page 3 Windows 2000 Select [Start] - [Programs] - [Panasonic] - [Hotkey Settings]. Windows XP Select [Start] - [All Programs] - [Panasonic] - [Hotkey Settings]. Set the parameters Set whether or not to use the Fn key lock function. When the Fn key lock function is enabled.

  • Page 4: Led Indicators

    LED Indicators Caps Lock This indicator lights green when Caps Lock is pressed. Subsequent non-shifted input is capitalized. NumLk These indicators light green when NumLk is pressed. This causes a (Numeric key) portion of the keyboard to function as a numeric keypad. The [Enter] key functions differently depending on the application.

  • Page 5: Touch Pad (Advanced)

    Touch Pad (Advanced) Use the touch pad to move the cursor on the display and perform normal computer operations. NOTE The touch pad has been designed to work only when a finger is used. Therefore, do not use any implement on the touch pad. The double-tapping speed of the touch pad cannot be changed.
  • Page 6 Touch Pad (Advanced) Function Touch Pad Operation Pan* Scroll in various direc- tions of a document ( m o v e t h e m o u s e slightly while holding Operate while holding down the two buttons. down the wheel) Zoom* Ctrl + Magnify/reduce the dis-...
  • Page 7 Touch Pad (Advanced) Changing the mode of the touch pad Windows 2000 Select on the taskbar and then select [TouchPad] or select [TouchPad] in [Start] - [Settings] - [Control Panel] - [Mouse]. Windows XP Select on the taskbar and then select [TouchPad or select [TouchPad] in [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
  • Page 8 Touch Pad (Advanced) When you want to re-enable the touch pad Windows 2000 In [Control Panel] - [System] - [Hardware] - [Device Manager], when an external mouse or trackball device is displayed in [Mice and other pointing devices], select [Driver] - [Uninstall] to delete it, and then select [OK] to confirm the deletion. Windows XP In [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [De- vice Manager], when an external mouse or trackball device is displayed in [Mice...

  • Page 9: Touchscreen

    Touchscreen Your computer is equipped with a touchscreen function allowing you to perform the same operations as the touch pad or mouse by touching the surface of the display with the stylus (included). (The following explanation gives one example (for the default settings). Windows 2000 The operation settings can be changed in [Start] - [Programs] - [UPDD] - [Settings].) Windows XP...
  • Page 10 Touchscreen Configuring the Touchscreen When needed, the touchscreen can be configured using the following steps. Windows 2000 Select from the taskbar or select [Settings] from [Start] - [Programs] - [UPDD] Windows XP Select from the taskbar or select [Settings] from [Start] - [All Programs] - [UPDD] The following screen will be displayed.
  • Page 11 Touchscreen When connecting the serial device The touchscreen is set so that Device 1 (touchscreen of the computer) and Device 2 (CF-VDL01 (optional) connected to the serial port of the port replicator) both operate. When connecting the serial device to the serial port of the port replicator, if Windows does not start or the serial device does not work properly, change the settings of the touchscreen driver with the following procedure.

  • Page 12: Standby/Hibernation Functions

    Standby/Hibernation Functions Starting Up Your Computer Quickly If you want to immediately start up and continue an application after shutting down your computer, you can do so by using either the standby or hibernation function. Differences between the standby and hibernation functions Function Standby function Hibernation function...
  • Page 13 Standby/Hibernation Functions Shutting Down Using the Standby or Hibernation Function The computer should be set for standby or hibernation function. ( page Slide the power switch; at the “beep*” sound, release your finger. (After releasing your finger from the power switch, do not touch the power Standby Mode switch until the power indicator goes Hibernation Mode...

  • Page 14: Resuming Operation

    Standby/Hibernation Functions Resuming Operation Slide the power switch When [Standby] or [Hibernate] is selected as the setting for [When I close the lid of my portable computer], the computer will enter either the standby or hibernation mode when the LCD panel is closed. Operation will resume when the LCD panel is opened. Even if the display is closed after the computer has entered either the standby or hiber- nation mode, operation will resume when the display is opened.
  • Page 15 Standby/Hibernation Functions Precautions for Using the Standby or Hibernation Function Do not use the standby or hibernation function when using the network function. Save all data before powering off your computer. When restarting from or shutting down to the standby or hibernation mode, do not touch the touch pad or touchscreen (or move the mouse if one is connected).

  • Page 16: Security Measures

    Security Measures To prevent unauthorized access of your computer, the various security measures are provided below. Situation Function to use Reference You do not want your computer to be used without permission Supervisor Password below User Password You do not want the data on the hard disk to be read, or data to Hard Disk Lock page 19 be written to the hard disk, in cases including theft.
  • Page 17 Use only the upper horizontal row of numeric keys to input your password. Do not forget your password. If your Supervisor Password is forgotten you will be unable to use your computer. Contact Panasonic Technical Support. When running the Setup Utility, do not leave your computer even for a short time, as the possibility exists for the password to be set/changed by another person.
  • Page 18 Use only the upper horizontal row of numeric keys to input your password. Do not forget your password. If a password is forgotten, you will be unable to use your computer. Contact Panasonic Technical Support. When running the Setup Utility, do not leave your computer even for a short time.
  • Page 19 To disable the Hard Disk Lock Select [Disable] and press Enter Press F10 and select [Yes], then press Enter CAUTION To technicians (at Panasonic Technical Support): Before changing the hard disk, be sure to set the [Hard Disk Lock] to [Disable].

  • Page 20: Computing On The Road

    Computing on the Road Conserving Power One of the main features of notebook-type computers is that you have the power of computing away from your home or office. In the following, information is provided on how to maximize use of the battery pack which is necessary for such computing. Four Important Points POINT Be sure to charge your battery before and after use.
  • Page 21 Computing on the Road Setting the Intel(R) SpeedStep (TM) technology Windows 2000 You can control power consumption by setting CPU performance separately for “AC adaptor connected” and “AC adaptor disconnected (i.e., running on batteries).” For performance settings, select either [Maximum Performance], [Automatic], [Battery Opti- mized Performance] or [Maximum Battery].

  • Page 22: Battery Power

    Battery pack or charger may not be working properly. Quickly remove the battery pack and disconnect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. Blinking orange* Unable to recharge due to violation of temperature limits.
  • Page 23 Battery Power Remaining Battery Level Confirmation by Alarm The computer can be set to notify of a low battery level, etc. using the following menu. When the battery level goes down to the level specified, the computer sets off an alarm and displays a message indicating the low battery level.
  • Page 24 Battery Power Accurately Displaying Battery Capacity The battery pack has a function for measuring, storing and learning about battery ca- pacity. Using this function properly to accurately display remaining battery capacity re- quires that the battery pack be fully charged (charged to 100%), then fully discharged, and then fully charged again.

  • Page 25: Replacing The Battery Pack

    Battery Power Replacing the Battery Pack When the charge provided by your battery pack is supplied for only a short period of time, even after fully charging according to the instructions, it may be time to replace your batter y pack. The battery pack is a consumable item and therefore will require replacement (CF-VZSU15A).
  • Page 26 Battery Power Put the battery pack Use the tab to lower the battery pack into place. Slide the battery pack inward until it is firmly in place. CAUTION Be sure the battery pack is properly connected to the connector. Put the cover back into place The cover is closed by inserting the hook at the right end (see illus- tration) into the groove.

  • Page 27: Pc Cards

    PC Cards Your computer has one PC Card slot. This slot conforms to the PC Card Standard; therefore, communications and SCSI devices may be utilized. The slot allows you to use one Type I or Type II card. CAUTION Check the PC Cards’ specifications. Be sure the total operating current does not exceed the specified limit.

  • Page 28: Ram Module

    RAM Module Use a RAM module meeting the RAM module specifications below. If a module is used that does not meet the specifications, there are cases in which data may become unus- able or the computer may not operate properly. RAM module specifications 144 pins, SO-DIMM, 3.3 V, SDRAM, PC133 Compliant Only a RAM card designed for PC133 can be added...

  • Page 29: Port Replicator

    Port Replicator A por t replicator is available as an option (CF-VEB341/CF-VEB342/CF-VEB343). This device eliminates the hassles of having you connect/disconnect the various cables when carrying your computer around and allows a variety of peripherals to be con- nected including a headphone or microphone, etc. The por t replicator connects to the expansion bus connector on the bottom of your computer.

  • Page 30: External Display

    External Display Power off your computer “Starting Up/Shutting Down”) Do not shut down using the standby or hibernation function. Port Replicator Connect your computer to the optional port replicator The operation manual of the port replicator, page Connect the external display to the port replicator Turn on the external display, then turn on your computer It is possible to change the display destination with Fn + F3 or in the following menu.

  • Page 31: Usb Devices

    USB connector of either the computer or a port replicator. Before star ting up Windows, however, only the USB connector of the computer can be used. If a USB floppy disk drive other than the Panasonic CF-VFDU03 USB floppy disk drive is used, operations such as reinstallation cannot be performed because the FDD will be unable to be used as a boot drive.

  • Page 32: Modem

    Modem Connecting to a telephone line and settings Connecting a telephone line to the modem It is not possible to connect the modem to any of the following lines. Internal home phones Intercoms CAUTION Do not use the PBX internal phone lines installed in company offices. Doing so may lead to a fire or electric shock.
  • Page 33 Modem Ring Resume Function With this function, if the telephone that is connected to the modem rings in the standby mode, the power of the computer automatically switches ON. This function is convenient when using automatic information receiving applications such as a FAX application. When using this function, it is necessary to run a software application able to main- tain the condition to receive telephone calls and to return the computer to the origi- nal condition after a call.

  • Page 34: Lan

    Using LAN When using the LAN, set [LAN] to [Enable]* in the Setup Utility. (* Default) Using the computer as a network computer When using the computer as a network computer, some additional settings may have to be made depending on the usage conditions. We recommend asking your system ad- ministrator or the person in charge of the network.
  • Page 35 Wake up from LAN This is a function to automatically power the computer on from a network server when the computer is in the standby or hibernation mode. To use this function, it is necessary to have a network environment that accommodates Wake up from LAN. To use this function: Windows 2000 Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] - [Hard-...

  • Page 36: Accessories

    Accessories Hand Strap and Shoulder Strap A hand strap and shoulder strap are available as an option (CF-VSS341). The hand strap is convenient for computing while standing. Adjust the length of the belt so that the computer does not fall by mistake, and firmly hold the computer when using it.

  • Page 37: Hard Disk Drive

    Hard Disk Drive To change your hard disk drive, contact Panasonic Technical Support CAUTION To customers: To change your hard disk drive, contact Panasonic Technical Support. Be sure to back up all important data before the change. If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable] before the change.
  • Page 38 Hard Disk Drive Heater Cable Remove the hard disk drive Unlock the connector lock. Remove the hard disk drive cable. Remove the heater cables. Gently lift the hard disk drive. Hard Disk Drive Cable Connector Lock Heater Remove the hard disk drive from the cover. Cover Disconnect the hard disk drive connector and remove the heater.

  • Page 39: Setup Utility

    Setup Utility Running the Setup Utility Turn on or restart the computer Press F2 while [Press F2 to enter SETUP] is displayed soon after the computer begins the startup procedure (If you fail to press F2 at this time, restart your computer.) If [Enter Password] is displayed Enter your password.

  • Page 40: Information Menu

    Setup Utility Information Menu Language: [English] Model No: xxxx Serial No: xxxx CPU Type: xxxxxxxx CPU Speed: 800 MHz BIOS Version: Vx.xxLxxx Embedded Controller Version: Vx.xxLxx System Memory: xxx MB Primary Master: xx GB Parameters : Default) * Select the language to be used when display- Language* English ing the Setup Utility.

  • Page 41: Advanced Menu

    Setup Utility Advanced Menu Serial Port A : [Auto] Serial Port B : [Auto] Touch Screen : [Auto] Wireless Modem* [Auto] Ring Resume* [Disable] Power SYNC with PC* [ON & OFF] Parallel Port: [Auto] Mode: [ECP] LAN: [Enable] Boot up from LAN: [Disable] Modem: [Enable]...

  • Page 42: Security Menu

    Setup Utility Security Menu Password on boot [Enable] Set Supervisor Password: [Enter] Display Boot Menu: [Enable] Hard Disk Lock: [Disable] User Password Protection: [No Protection] Set User Password: [Enter] NOTE When the Setup Utility is started up with the User Password; The User Password can be changed only when [User Password Protection] has been set to [No Protection].

  • Page 43: Boot Menu

    Setup Utility Boot Menu Floppy Drive Hard Disk Drive CD Drive LAN* * Not displayed when [Boot up from LAN] is set to [Disable]. The default order is as follows: [Floppy Drive] [Hard Disk Drive] [CD Drive] [LAN]. To move a device up by one in the order, select the device with ,and then press F6 .

  • Page 44: Technical Information

    Technical Information Network When the power saving function is running, communications software may malfunction. For example, communications may be halted if the standby (hibernation) mode is acti- vated. The computer must be restarted if one of these modes is entered during data communications.

  • Page 45: Dmi Viewer

    Select [DMI Viewer] from [Start] - [Programs] - [Panasonic] Windows XP Select [DMI Viewer] from [Start] - [All Programs] - [Panasonic] The screen shown below is displayed. When you click on an item, detailed information on that item will be displayed.

  • Page 46: List Of Error Codes

    If your system displays one of except the messages marked below with an asterisk (*), write down the message and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct the error.
  • Page 47 List of Error Codes 02F5 DMA Test Failed Cannot write to extended DMA (Direct Memory Access) registers. 02F6 Software NMI Failed Cannot generate software NMI (Non-Maskable Interrupt). 02F7 Fail - Safe Timer NMI Failed Fail-Safe Timer takes too long. device address Conflict Address conflict for specified device.

  • Page 48: Dealing With Problems (Advanced)

    Check to see if a fully charged battery is properly installed. Remove the battery pack and disconnect the AC adaptor, then connect them again. [Enter Password] is dis- Input your password. If you have forgotten it, contact Panasonic Technical Support. played POST Startup Error(s) is...
  • Page 49 The battery pack or recharging function may be defective. Quickly remove the battery pack and disconnect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. The orange indicator Unable to charge because of an improper temperature range. ( “Precau-...
  • Page 50 Setup Utility [Enter Password] is dis- Enter the User Password or Supervisor Password. If you have forgotten it, contact played Panasonic Technical Support. [Advanced] menu can Restart the Setup Utility with the Supervisor Password. not be registered All or some items in [Se- Restart the Setup Utility with the Supervisor Password.
  • Page 51 Dealing with Problems (Advanced) Display No display after powering When there is no display to an external display, • Check your cable connection to the external display. • Confirm your display is powered on. • Check the settings for your external display. Try changing the display by pressing Fn + F3 .
  • Page 52 Confirm that a driver for your operating system has been installed. USB floppy disk drives Only the Panasonic CF-VFDU03 USB floppy disk drive can be used. do not work as a boot Do not connect the floppy disk drive to the USB connector of the port replicator for drive this computer.
  • Page 53 Check to see if the hard disk is full. If it is full, delete unnecessary files. Your hard disk content may be corrupted. Contact Panasonic Technical Support. When the previous item Try testing another drive or media.
  • Page 54 Intel, Pentium and SpeedStep are either registered trademarks or trademarks of Intel Corporation. ® ® Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. PCE0092A_2K/XP...

Table of Contents