Miele KM 5621 Operating And Installation Instructions
Miele cooktop user manual
Hide thumbs
Also See for KM 5621:
- Product dimensions (1 page) ,
- Operating and installation instructions (52 pages)
Related Manuals for Miele KM 5621
Summary of Contents for Miele KM 5621
- Page 1 Operating and Installation Instructions Ceramic Cooktop KM 5621 KM 5624 KM 5627 en - US, CA To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 07 844 520...
-
Page 2: Table Of Contents
Description of the cooktop ........ -
Page 3: Important Safety Instructions
SAVE THESE INSTRUCTIONS for a future user. Correct usage Only use the cooktop for residential cooking, and for the purposes described in this manual. Other uses are not permitted and can be dangerous. - Page 4 IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Be sure your appliance is properly installed and grounded by a qualified technician.
- Page 5 COOKING AREA - During operation, the cooking area and its surroundings will get hot and can cause burns. When the cooktop is shut off, the surface may remain hot enough to cause harm, even though the glow is not visible through the dark glass.
- Page 6 To prevent damage to the cooktop do not use pots and pans with thin bases on the cooktop. Never heat an empty pan unless the pan manufacturer states that you can do so.
- Page 7 NEVER set down hot pots or pans in the "Residual Heat" indicator area. This can damage the underlying electronics. If the cooktop built in behind a cabinet door, it should only be operated with the door open. Close the door only when the appliance is shut off and the Residual Heat indicators have gone out.
-
Page 8: Description Of The Cooktop
Description of the cooktop KM 5621 Variable burner Standard burner Residual heat indicator Burner data Burner Left front Left rear Right rear Right front Control knobs for the burners: left rear right rear right front left front C Diameter inch "... - Page 9 Variable burner Standard burner Residual heat indicator Burner data Burner Left front Left rear Right rear Right front Description of the cooktop Control knobs for the burners: left rear right rear right front left front C Diameter inch " / 9 "...
- Page 10 Description of the cooktop KM 5627 Variable burners Standard burner Residual heat indicator Burner data Burner Left front Left rear Center rear Right rear Right front Control knobs for the burners: left rear center rear right rear right front left front...
-
Page 11: Before Using For The First Time
Before using for the first time Heat the cooktop Only for facet cooktops: A small gap between the cooktop and the work surface may be visible in the first days of operation. It will become smaller during use. Despite this small gap, the electrical safety of your appliance is always ensured. -
Page 12: How The Burners Operate
How the burners operate One-zone burners use one heating strip; two-zone burners and grill zones have two heating strips. Depending on the model, the heating strips may be separated by a ring. Each burner has overheating protection (internal temperature limiter) feature to prevent the ceramic glass from overheating (see "Overheat protection"). -
Page 13: Operation
The burners are turned on when the corresponding control knob is pressed in and rotated to the desired output level. Control knobs for one-ring burners can be rotated 360°. Burners can be turned on and off by turning the knobs to right or to left. -
Page 14: Residual Heat Indicator
The residual heat indicator will turn off once the cooking zone is safe to the touch. Do not touch the burner or rest any objects on the cooktop when the residual heat indicator is on. Danger of burns! -
Page 15: Selecting Cookware
These melt at high temperatures. – Copper bottom and aluminum pans may leave a residue on the cooktop in the form of metallic lines. This is normal. These lines can be removed using a non-abrasive ceramic cooktop cleaner or a shielded scraper blade. -
Page 16: Overheat Protection
Overheat protection Each cooking zone is equipped with a temperature limiter. This feature automatically turns off the heating element before the glass ceramic becomes too hot. Once the ceramic surface has cooled to a safe temperature the heating element will automatically turn back on. -
Page 17: Cleaning And Care
Stubborn soiling is best removed with a shielded scraper blade. ^ Apply a ceramic cleaner (available from Miele) using a soft cloth or paper towel. ^ To remove any limescale deposits or metallic residue apply a ceramic cleaner using a soft cloth or use a shielded scraper blade if necessary. -
Page 18: Frequently Asked Questions
The cookware conducts heat poorly. Solution Check whether a fuse is blown. If the problem persists contact Miele. See "Overheat protection". This turning on and off of the heat is normal. It is activated by the electronic heat output control (see "How the... -
Page 19: Technical Service
Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. -
Page 21: Installation Instructions
Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and appliance damage read these instructions before installation or use. -
Page 22: Important Installation Safety Instructions
However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements. You must ensure the power cable... -
Page 23: Safety Distances Above The Appliance
Safety distance from divider Installation of a divider under the cooktop is not required. If a divider is fitted under the cooktop, the distance between the upper edge of the work surface and the upper edge of the divider must be at least 4 ½ "... - Page 24 IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. 1 5/8"...
-
Page 25: Installation
Safety distance from the wall covering If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out and the covering, since high temperatures can damage these materials. If the covering is made of a combustible material (such as wood), the distance between the countertop cut-out and the wall covering must be a minimum of 2"... -
Page 26: Sealing
Installation Frame/Facet Cooktops Sealing The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service. -
Page 27: Installation Dimensions
KM 5621 5 / 8 " 1 / 8 " ( 6 2 6 ( 5 4 2 " ( 5 0 Spring clips Front Installation height Power cord, L = 56 11/16" (1440 mm) Rating label 3 / 8 "... - Page 28 Installation dimensions KM 5624 Spring clips Front Installation height Power cord, L = 56 11/16" (1440 mm) Rating label...
- Page 29 Installation dimensions KM 5627 Spring clips Front Installation height Power cord, L = 56 11/16" (1440 mm) Rating label...
-
Page 30: Installation
"Installation dimensions" of each unit. Facet cooktops: A special sealing strip ensures the slip-proof seating of the cooktop in the cutout. The gap between the frame and the countertop will narrow after a little time has passed. ^ Create the countertop cutout as shown in the "Installation... - Page 31 (for facet cooktops only) The spring clips and the securing strips must be on or flush with the top edge of the cooktop. ^ Coat the lateral edges and the lower edge of the spring clips and securing strips with silicon.
- Page 32 Installation Insert the cooktop ^ Feed the power cord down through the cut-out. ^ Place the cooktop lightly on the spring clips. ^ With a hand on each side of the appliance press down evenly on the edges until it clicks into position.
-
Page 33: Electrical Connection
Black wire: connect to L1 (hot) Red wire: connect to L2 (hot) Green wire: connect to GND (ground) KM 5621: 208 V, 60 Hz, 40 A fuse rating 240 V, 60 Hz, 30 A fuse rating KM 5624: 208/240 V, 60 Hz, 40 A fuse rating... -
Page 34: Help Protect Our Environment
Help protect our environment Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances contain materials that can be recycled. - Page 36 Alteration rights reserved / 1811 M.-Nr. 07 844 520 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.