Entering the PIN code for Manual tuning ........19 Thank you for buying this Pioneer product. Bluetooth wireless connection ..13 Seek tuning..........19 Please read through these instructions so you will know how to operate your model prop- Displaying the Bluetooth Selecting a preset channel erly.
Page 3
For steering wheel control Displaying the image of your Recalling equaliser curves ....... 47 Starting procedure .........29 adapter for Pioneer users ....39 application (iPhone with Customising the equaliser curves ... 47 For users directly connecting Selecting files from the file Lightning connector) ......
Page 4
Setting the illumination colour ....49 Setting the password ........ 55 Installation using the screw Entering the password ......55 holes on the side of this product ..62 Selecting the colour from the Deleting the password ......56 Installing the microphone ....63 preset colours ........
ONLY WARRANTIES MADE BY PIONEER OR training and experience in electronic To promote safety, certain functions are Tampering with or disabling the hand- ANY OF ITS LICENSORS, AS APPLICABLE.
V OUT ally not possible to recover the data. The video output terminal (V OUT) is for Pioneer accepts no liability for damages, ■ Before removing the vehicle connection of a display to enable passen- costs or expenses arising from data loss battery gers in the rear seats to watch video images.
Chapter There is a danger of explosion if the bat- For details, refer to Inserting and ejecting tery is incorrectly replaced. Replace only For audio an SD memory card on page 9. with the same or equivalent type. Press and hold to perform fast forward. Do not handle the battery with metallic For video Remote control...
Chapter 3 Slide the dial at the bottom of the Protecting your product Notes on using the LCD panel Inserting/ejecting/connecting front panel to the right, and lift up against theft media the front panel while pushing down WARNING on the dial. Keep hands and fingers clear of this CAUTION CAUTION...
Chapter ■ Inserting and ejecting an SD Unplugging a USB storage device 5 Press the button. Regular startup memory card The LCD panel closes. Pull out the USB storage device p This system is not compatible with the Start the engine to boot up the ■...
Chapter 2 Touch the AV operation key. For details of the operation, refer to How to use the screens Changing the display order of source icons on page 11. ■ Switching screens using the touch panel keys 7 AV operation screen You can customise the settings for each source.
Chapter 3 Touch the source icon you want to 2 Touch the following key. 3 Touch the following key. ■ Operating list screens select. The AV operation screen of the selected Displays the AV source source appears. Displays the source list. selection screen.
Chapter disconnected. When the system restarts, 5 Touch the following key. 1 Displays the characters that are entered. Illuminates when your the system automatically attempts to If there is no text in the box, an informa- mobile device is success- reconnect the previously-connected tive guide with text appears.
Chapter 2 Use the Bluetooth setting in the p Once the connection is established for Connection cannot be established auto- Entering the PIN code for the first time, the connection with the matically for some reason. device to pair this product with the device will be established automatically If you wish to start the connection manually, Bluetooth wireless connection...
Chapter 2 Touch the following keys in the phone featuring Bluetooth technology on 8 Displays the alphabet search screen. Clearing the Bluetooth this product. following order. ■ Reading the screen memory For details about connectivity with the 4 5 6 devices featuring Bluetooth wireless p This setting is available only when you technology, refer to the information on our...
Chapter 3 Touch the number keys to enter the 5 Dialling starts. 6 Touch the phone number you want phone number. p To cancel the call, touch to dial. Received calls. The dial screen appears. 6 Touch the following key. 4 Touch the following key.
Chapter Dialling from the preset dial list ■ Answering an incoming call 2 Touch the following key. 3 Touch [Ring Tone] repeatedly until This product informs you that it is receiving a the desired setting appears. 1 Press the HOME button to display call by displaying a message and producing On (default): Displays the dial confirma-...
Chapter ■ Adjusting the other party’s lis- phone number is registered under dif- Notes for hands-free phoning ferent names, only the phone number is tening volume displayed. or smartphone setup To maintain good sound quality, this prod- General notes If the phone number of the received uct can adjust the other party’s listening 1 Select the method for connecting your Connection to all mobile phones featur-...
Chapter p If you change the setting, the confirma- iPhone 4 Information on the connections and functions for each device tion screen appears. iPhone 3GS Touch [OK]. iPod touch 4th generation The settings and cables required for connecting each device, and the available sources are The setting will change after the following iPod touch 3rd generation as follows.
Chapter 7 Preset number indicator Connect to USB Connect to USB Connection requirement Seek tuning Highlights the selected preset item. port 2. port 2. AppRadio Mode — Touch and hold one of the follow- Available source Starting procedure ing keys for about one second and MirrorLink —...
Chapter broadcast channels for later recall (also with Local seek tuning allows you to only tune 1 Touch the following key. 1 Press the HOME button to display the touch of a key). into those radio stations with sufficiently the Top menu screen. strong signals for good reception.
Chapter ends, reception of the previous programme 5 Touch [Alternative FREQ] repeat- Off: resumes. Turns the regional function off. Activates the Auto PI seek function. edly until the desired setting p Regional programming and regional appears. 1 Press the HOME button to display networks are organised differently Off (default): Operating with the hardware...
Chapter m Moves ahead one frame (frame-by-frame For details, refer to Using the equaliser on Playback screen (page 2) playback) or slows down playback speed page 47. (slow-motion playback). 5 Selects a track from the list. For details, refer to Frame-by-frame play- For details, refer to Selecting files from back on page 24.
Chapter Repeats the current disc. p For DVD-Videos, you can select Title 5 Audio channel indicator (title), Chapter (chapter) or 10Key Shows the current audio channel type, Repeats just the current track. (numeric keypad). such as “Mch” (Multi-channel). name list p If you turn random play on when the p For Video-CDs, you can select Track 6 Digital sound format indicator...
Chapter 2 Touch the following key. Touch [ ] during pause. 2 Touch the following key. Resuming playback Each time you touch [ ], you move ahead (Bookmark) one frame. Starts playback from the p To return to normal playback, touch [ / ]. The Bookmark function lets you resume Displays the touch panel keys to selected menu item.
Chapter p This function is not available when disc : File name d Switches between playback and pause. — Playback screen (page 2) playback has been stopped. Shows the name of the file currently e Uses “Sound Retriever” function. p The appearance of this key changes playing.
Chapter 2 Insert the SD memory card into the Touch the following key repeatedly 4 Touch the item that you want to Repeats just the current SD card slot or plug the USB stor- refine. until the desired setting appears. folder.
Chapter Repeats all files. : Folder name — For details, refer to Media compatibility For details, refer to Displaying the phone Shows the name of the folder containing chart on page 69. menu on page 14. Repeats just the current file. the file currently playing.
Chapter 4 Use the touch panel keys on the Switches the media file type to video. For details, refer to Selecting files from Repeats just the current file. Photo: screen to control the external stor- the file name list on page 29. Switches the media file type to still image age device (USB, SD).
Chapter p Touching a folder on the list shows its 1 Touch the following key. Starting procedure Operating with the hardware contents. You can play a file on the list by Displays the pop-up menu for touching it. buttons selecting a media file type to 1 Display the AV source selection play in the external storage screen.
Chapter then launch CarMediaPlayer while in Name” is displayed if there is no corre- e Sets a repeat play range. Using the touch panel keys AppRadio Mode. sponding information. For details, refer to Setting a repeat play For details about the CarMediaPlayer, : Album title (for video) range on page 31.
Chapter 2 Connect your iPod. Touch the following key repeatedly Movies 1 Touch the following key. Music Videos The source changes and then playback will until the desired setting appears. TV Shows start. Changes the repeat play Video Podcasts p If the iPod is already connected, touch Switches the control mode.
6 Album artwork 1 Touch the artwork to open a list of date on page 54. Pioneer is not liable for any issues that Album art of the current song is displayed the names of songs on the album 3 Displays the Setting menu screen.
Chapter p If you press the HOME button twice, the 8 Press the HOME button to go back 3 Connect your smartphone to this 3 Touch the text input area on the App control side bar will disappear. Press to the Top menu screen. product via the separately sold App application operation screen.
Chapter — When entering AppRadio Mode after a ■ Displaying the image of your p Depending on the type of application, you 1 Connect your smartphone to this Bluetooth connection using SPP (Serial may not be able to see the image on the product via the separately sold App application (iPhone with 30-pin Port Profile) has been established.
Chapter p Depending on the type of MirrorLink 7 Press the HOME button to go back Using a Bluetooth Using the touch panel keys device, this key is not appears. to the Top menu screen. audio player 4 Displays the menu screen. Playback screen (page 1) p Depending on the type of MirrorLink You can control a Bluetooth audio player.
Chapter 1 Touch the following key. Using an HDMI source For details, refer to Playing files in ran- Starting procedure dom order on page 36. You can display the video image output by b Sets a repeat play range. 1 Pull out the connecting cable for the device connected to this product.
Chapter 2 Touch the following keys in the 1 Current time and date 15/16 Reading the screen Using the touch panel keys following order. Starting procedure You can display the video image output by the device connected to video input. 1 Press the HOME button to display The “Video Setup”...
Chapter The MIXTRAX software can be downloaded CAUTION Reading the screen Setting the video signal from the website below. For safety reasons, video images cannot be http://www.mixtraxnet.com When you connect this product to an AV viewed while your vehicle is in motion. To For details on how to use the MIXTRAX equipment, select the suitable video signal view video images, you must stop in a safe...
For details please contact your dealer or [Albums]. p You must clear all default settings before 3 Touch [MIXTRAX Settings]. an authorised Pioneer Service Station. you use this function. 4 Touch [Flash Pattern] repeatedly 6 Touch [Clear]. until the desired setting appears.
Chapter 7 Touch the following key. 4 Touch [Radio settings]. The “System” screen appears. Press to cycle through all 3 Touch [AV Source Settings]. 5 Touch [FM Step] repeatedly until Press to select the next or the available sources. the desired setting appears. 4 Touch [Bluetooth Audio] repeat- Source previous disc or folder.
CAUTION seconds after the AV operation screen is The “System” screen appears. The image quality may deteriorate Pioneer recommends the use of a camera displayed, the camera view will appear 3 Touch [Camera settings]. depending on the usage environment, which outputs mirror reversed images, automatically.
Chapter 2 Using packing tape or similar, 1 Press the HOME button to display Selecting the system place markings approximately the Top menu screen. Moves the point downward. language 25 cm from each side of the vehicle, 2 Touch the following keys in the and approximately 50 cm and 2 m The system language can be selected.
Chapter p Do not turn off the engine while saving 1 Display the screen you wish to 2 Touch the following keys in the the adjusted position data. adjust. following order. Selects the adjustable next item. 1 Press the HOME button to display 2 Press the HOME button to display the Top menu screen.
Chapter 7 Touch [Firmware Update]. Audio adjustments 5 Touch the following keys to adjust Each time you touch the keys, the left/right speaker balance moves towards the left or The “Firmware Update” screen appears. the left/right speaker balance. right. 8 Touch [Continue] to display the p “Left25”...
Chapter 1 Compare the FM tuner volume 5 Touch the following keys to adjust volume is automatically set to the same level as USB port 2. level with the level of the source the source volume. The following adjustments can be made dur- you want to adjust.
Chapter 5 Touch the following keys to select 5 Touch the following keys to select 4 Touch the desired position. 4 Touch the following keys to select “Front” or “Rear”. “Subwoofer”. Off (default): the listening position if necessary. Changes the listening position setting to off.
Chapter Rear Left: 5 Touch the following keys to select Changes the distance between the front Custom2 is an adjusted equaliser curve Changes the speaker level of the rear left right speaker and the selected listening the listening position if necessary. that you create.
Chapter The “Audio” screen appears. turn the LPF off before performing Auto 1 Stop the vehicle in a quiet place, WARNING EQ. Also, set the cut-off frequency for the close all the doors, windows and A loud tone (noise) may be emitted from 3 Touch [Graphic EQ].
Chapter 7 Touch the following keys in the p The measurement time varies depending Shifts gradually between the five default Selecting the background on the type of vehicle. colours in sequence. following order. p To stop the measurement, touch [Stop]. p You can preview the Top menu screen display or the AV operation screen by touching...
Chapter p Background display image must be used 2 Touch the following keys in the 4 Touch the following key. Changing the preinstalled within the following formats. following order. Displays the list of the splash — JPEG image files (.jpg or .jpeg) splash screen screens stored on the external —...
Chapter Selects all settings. p This setting is available when the selected The “Video Setup” screen appears. Setting the angle icon display source is “Disc”, “CD”, “Video CD” or 6 Touch [Export]. 3 Touch [DVD/DivX Setup]. “DVD”. The angle icon can be set so it appears on Data export starts.
Chapter 2 Touch the following keys in the ■ Setting the code number and p We recommend that you keep a record of Displaying your DivX VOD your code number in case you forget it. following order. level p The parental lock level is recorded on the deregistration code When you first use this function, register disc.
Chapter The “Video Setup” screen appears. Setting the video output 3 Touch [DVD/DivX Setup]. format 4 Touch [DVD Auto Play] repeatedly You can switch the video output format of until the desired setting appears. the rear display between NTSC and PAL. Off (default): p The video output format setting has no Turns the DVD Auto Play setting off.
Chapter Touch the following key repeatedly p This setting is for video and JPEG images. — Compatible file types are DVD-V, 2 Touch the following keys in the Trimming Video-CD, DivX, MPEG-1, MPEG-2, and following order. until the desired setting appears on An image is displayed across the entire MPEG-4 only.
WARNING p This setting is available when the selected You can restore settings or recorded content Pioneer does not recommend that you ■ Deleting the password source is “Disc”, “CD”, “Video CD” or to the default settings. Various methods are install this product yourself.
Chapter in any of the vehicle’s moving parts, connected to metal parts of the car’s control terminal, the auto-aerial relay con- especially the steering wheel, gearstick, body. The earth wire of the power amp trol terminal, or the aerial booster power handbrake, sliding seat tracks, doors, or and the one of this unit or any other control terminal (max.
Chapter Connecting the power cord This product Microphone Yellow To terminal supplied with power regardless of ignition Aerial jack switch position. To electric terminal controlled by ignition switch (12 V DC) Wired remote input ON/OFF. Hard-wired remote control adapter can be connected (sold separately). Orange/white Fuse (10 A) To lighting switch terminal.
Chapter USB port 1 Connecting to separately sold power amp Connecting an iPhone with This product Lightning connector Power amp Notes (sold separately) cables Rear outputs For details on how to connect an external (sold separately) (REAR OUTPUT) device using a separately sold cable, Power amp (sold separately) refer to the manual for the cable.
Chapter ■ Connecting an Android device USB port 1 This product Connecting the Android™ This product with an MHL port device This product App Connectivity Kit (CD-AH200) (sold sepa- rately) is required for the connection. Notes USB port 2 AUX input For details on how to connect an external device using a separately sold cable, USB port 2...
Chapter 2 Wrap the lock tie around the hook displayed when backing and when ■ Using an AUX input Connecting the external video checking the rear of the vehicle while above the HDMI port and the High This product moving forward. component Speed HDMI®...
Chapter — May interfere with the driver’s operation Places that may be exposed to rain, such Connecting an HDMI device Connecting the rear display of the vehicle, such as on the floor in as close to the door or on the vehicle’s front of the driver’s seat, or close to the floor.
Chapter ■ Mounting on the sun visor ■ Installation on the steering column 1 Fit the microphone lead into the groove. 1 Detach the microphone base from the microphone clip by sliding the microphone base while pressing the tab. If the pawl interferes with installation, you may bend it down out of the way.
If a solution to your problem A parental lock message Turn the parental lock off or change cannot be found here, contact your dealer or the nearest authorised Pioneer service facility. is displayed and DVD The parental lock is on.
If the error Protect disc are embedded with Replace the disc. persists, record the error message and contact your dealer or your nearest Pioneer service DRM. centre. The temperature of this...
Page 66
Appendix Message Cause Action Message Cause Action Reference Reference Files that cannot be Remove your device and replace it Video resolution not Select a file that can be played. played on this product are with a compatible SD memory card. supported 69, 74 included in the file.
Bluetooth module of this played after performing the above discs. Do not use shaped discs. product. action, please contact your dealer or an authorised Pioneer Service Condensation may temporarily impair Station. the built-in drive’s performance. Leave it to adjust to the warmer temperature MirrorLink for about one hour.
Appendix p Manufactured under licence from Dolby CD-R/CD-RW discs Notes on SD memory cards Laboratories. Dolby and the double- Some SD memory cards may not be Unfinalised discs cannot be played back. D symbol are trademarks of Dolby recognised by this unit even if the SD It may not be possible to playback CD-R/ Laboratories.
Appendix SD memory card and SDHC mem- Up to 255 subtitle files may be used. Any ■ Media compatibility chart more subtitle files will not be recognised. ory card General Up to 64 characters can be used for the For details about SD memory card name of the subtitle file, including the compatibility with this product, refer to DVD-R/-R...
Bluetooth SIG, Inc. and any use of such display area. tools to convert your files into DivX videos. marks by PIONEER CORPORATION is Folder selection sequence or other ABOUT DIVX VIDEO-ON-DEMAND: This DivX under licence. Other trademarks and operations may be altered, depending on Certified®...
■ Handling the LCD screen high temperature. The terms HDMI and HDMI High-Definition Latest version of the Pioneer compat- When the LCD screen is subjected to Do not leave the iPod in any location with Multimedia Interface, and the HDMI Logo...
In that case, please consult your dealer or the nearest ■ Liquid crystal display (LCD) authorised Pioneer Service Station. screen If the LCD screen is near the vent of an air conditioner, make sure that air from the air conditioner is not blowing on it.