Canon EOS DIGITAL REBEL XTI Service Manual

Hide thumbs Also See for EOS DIGITAL REBEL XTI:

Instruction manual (273 pages)

White paper (29 pages)

Instruction manual (180 pages)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

page of 212

/ 212
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Chapters

Table of Contents

Summary of Contents for Canon EOS DIGITAL REBEL XTI

Page 3: General Information
Preface PREFACE This manual contains information for servicing the product, and has the following sections: General Information Provides the basic information needed to understand the product. (Operating instructions are not included. Refer to the products instruction book if necessary.) Technical Information Provides technical information about the mechanism and electronics of the product.
Page 5: Table Of Contents
General Information CONTENTS Page General Information 1．FEATURES ………………………………………………………………………………… 1 1.1 High precision and high image quality ………………………………………… 1 1.2 Dust-removal measures …………………………………………………………… 1 1.3 Quick and easy shooting …………………………………………………………… 1 1.4 Advanced features while retaining EOS KISS DIGITAL N's best features …… 2 1.5 Compact, lightweight, and luxury design ………………………………………...
Page 6: 1．Features
● Continuous shooting: Max burst approx. 27 shots in JPEG Large/Fine, approx. 10 shots in RAW. ・Based on Canon's testing standards and a 512MB CF card. ●1/4000 sec. - 30 sec., bulb, X-sync at 1/200 sec. ●Wide 2.5-in. LCD monitor with approx. 230,000 pixels ・...
Page 7: Advanced Features While Retaining Eos Kiss Digital N's Best Features
・Image transfers to a personal computer as controlled by the camera. 1.5 Compact, lightweight, and luxury design ●126.5 (W)×94.2 (H)×65 (D) mm, Weight: 510g ・The depth is 1 mm thicker than the EOS KISS DIGITAL N. ●Stylish and classy form, exuding high reliability ・The Canon logo has ﬁlled-in color.
Page 8: 2．Overview
General Information 2．OVERVIEW 2.1 EOS D REBEL XTI / EOS 400D D body While retaining the EOS KISS DIGITAL N's basic concept of being compact, lightweight, and easy to use, the entry-level EOS D REBEL XTI / EOS 400D D boasts a major upgrade of the EOS KISS DIGITAL N's core features.
Page 9 General Information Table 001 Speciﬁcations Comparison of EOS D REBEL XTI / EOS 400D D and EOS KISS DIGITAL N ■ （2/2） (Items in indicate advantages over the EOS KISS DIGITAL N.) Speciﬁcation EOS D REBEL XTI / EOS 400D D EOS KISS DIGITAL N Sensor Zones Metering range [EV]...
Page 11 General Information １） Image recording ⑴ Large CMOS sensor with approx. 10.10 eﬀective megapixels The CMOS sensor (Fig. 002) is 22.2 mm×14.8 mm with 10.10 eﬀective megapixels (the highest in this camera class). The eﬀective lens crop factor is 1.6 . ⑵DIGIC II Fig.
Page 12 General Information ２） Image processing ⑴Picture Styles The same Picture Styles found in the EOS 30D are incorporated. In the Creative Zone modes, when you press the SET button, the Picture Style selection screen appears (Fig. 004). It is now easier to select a Picture Style. ⑵Noise reduction As with the EOS 30D, the [Long exp.
Page 14 This range is one stop wider in low light than the EOS KISS DIGITAL N's. Fig. 008 AF sensor ＊ The EOS D REBEL XTI / EOS 400D D is Canon's ﬁrst entry-level SLR with 9-point AF and cross-type sensor compatible with f/2.8. ●Selectable AF mode In the Creative Zone modes, the AF mode (One-Shot AF, AI SERVO AF, or AI Servo AF) is user selectable.
Page 18 ・ The black body has a leathery ﬁnish to make ﬁngernail scratches less noticeable. The exterior looks solid and profound for a luxury look. ・ The Canon logo is bigger to make it stand out better in the camera store. ●Operation ease ・...
Page 19 General Information ⑵Basic operation ●Startup time Fast startup time taking approx. 0.2 sec. for the camera to be able to shoot after the power switch is turned on. ●Basic operation Except for the cross keys assigned with functions such as the ISO speed setting, the basic camera controls are the same as with the EOS KISS DIGITAL N.
Page 20 General Information ７）Camera direct printing ⑴Interface The USB 2.0 Hi-Speed port enables high-speed image transfers from the camera to a personal computer. Also, the PTP protocol is now used for both camera direct printing and transmissions to a personal computer. This makes it unnecessary to switch the communications setting.
Page 21 General Information 10）Dimensions and weight Dimensions: 126.5 (W)×94.2 (H)×65 (D) mm/4.98 (W)×3.71 (H)×2.56 (D) in., Weight: 510 g/18 oz. ＊ To improve holding comfort, the grip was made slightly thicker. This has increased the camera depth dimension by 1 mm compared to the EOS KISS DIGITAL N. ＊...
Page 22: 3．Design Specifications
3．DESIGN SPECIFICATIONS (Speciﬁcations diﬀerent from the EOS KISS DIGITAL N are indicated in blue.) 1．Type Digital AF/AE single-lens reﬂex camera with built-in ﬂash Type: Canon EF and EF-S lenses Compatible lenses: Canon EF mount Lens mount: None Lens restrictions: Equivalent to 1.6 the normal lens focal length Lens focal length: 2．Image Sensor...
Page 23 Fine Small Normal RAW+Large/Fine − ＊ The above speciﬁcations are based on ISO 100 and Canon's testing standards. ＊ The number of possible shots is based on Canon's testing standards and a 512MB CF card. ＊ The actual single image size and possible shots depend on the subject,...
Page 24 JPEG: IMG_****.JPG (The asterisks indicate the ﬁle number.) Image ﬁle name: RAW: IMG_****.CR2 ⑴If Adobe RGB is set, the "I" in IMG will be underscored. ⑵ The extension for RAW images will be CR2 (Canon RAW 2nd Edition). The following three types of ﬁle numbers can be set:...
Page 25 General Information 1)Basic Zone modes: Automatic settings 3-11 Picture Style: ・Portrait mode: Automatically set to "Portrait" ・Landscape mode: Automatically set to "Landscape" ・ In shooting modes other than the above, automatically set to "Standard" 2) Creative Zone modes: Picture Style selection and settings are available.
Page 26 General Information 4．Recording Media Drive Accepts CF card Types I and II Type: 1 slot with cover provided Slots: Access lamp blinks CF card access indicator: Error warning displayed in viewﬁnder and on LCD monitor. Read error warning: Shutter release is locked. Enabled CF card initialization: ・With the menu's [Format].
Page 27 General Information Based on the color temperature of the current WB mode White balance (among those listed in 5-2), WB bracketing for images at bracketing: "Standard color temperature → blue bias → amber bias" or "Standard color temperature → magenta bias → green bias" is executed up to ±3 stops in 1-stop increments with a single release of the shutter.
Page 29 General Information 7．Autofocus TTL-CT-SIR with CMOS sensor Type: 9 AF points AF points: ⑴ The center AF point is sensitive to vertical and horizontal lines as a cross-type sensor (① a sensor sensitive to vertical lines to f/2.8, ② a two-line sensor sensitive to horizontal lines to f/5.6, ③...
Page 30 General Information [AI Focus AF (Automatic switching between One-Shot/ Predictive AI Servo AF)] When the AF point which achieved focus in the One-Shot AF mode detects subject movement, the AI Servo AF mode takes over. ⑴Automatically set in the Full Auto and No Flash modes. ⑵...
Page 31 ⑷ The focus conﬁrmation beeper can be enabled or disabled with the menu's [Beep]. Same as EOS 30D 7-10 AF precision: EV 0.5 - 18 (at 23° C/73° F and ISO 100, under Canon's testing 7-11 AF working range: standards) Intermittent ﬁring of built-in ﬂash. 7-12 AF-assist beam: ⑴...
Page 32 8)E-TTL II autoﬂash program AE ・C.Fn-8-0: Evaluative metering, C.Fn-8-1: Averaged metering EV 1-20 (at 23° C/73° F with 50 mm f/1.4 lens at ISO 100, Metering range: under Canon's testing standards) Shutter speed and aperture displays blink on the LCD monitor Exposure beyond and in the viewﬁnder.
Page 33 General Information 1) Basic Zone modes: Automatically set by the camera ISO Speed: （ISO） AE Shooting With With Built-in Shooting Mode External Slower than 1/500 sec. Flash Speedlite 1/500 sec. or faster Full Auto 100 - 400 Portrait Landscape 100 - 400 −...
Page 34 General Information ⑶ Bracketing sequence: Standard exposure, decreased exposure, and increased exposure ・ Taken in accordance with the drive mode. ・ If the self-timer is used, the three bracketed shots will be exposed successively after the self-timer delay. ・ May be used in combination with WB-BKT. (In this case, nine images will be generated.) ⑷Bracketing factor: Same as for 1).
Page 35 General Information Enabled with C.Fn-02 [Noise reduction] set to [Auto] or [On]. Noise reduction: ⑴ [Auto]: The noise level is detected automatically and noise reduction is performed. ⑵ [On]: Noise reduction is performed on exposures 1 sec. or longer. ⑶ The noise reduction process will take the same amount of time as the exposure time.
Page 36 Small/Normal RAW+Large/Fine ＊ Based on Canon's testing standards with 512MB high-speed CF card. ＊ The maximum burst is displayed at the bottom of the viewﬁnder ("9" is displayed if it is 9 shots or higher, or "8" to "0" are displayed if less than 9).
Page 37 General Information 11．Built-in Flash Auto pop-up, retractable, built-in ﬂash in the pentaprism 11-1 Type: Guide No. 13 (at ISO 100 in meters) 11-2 Guide No.: Approx. 3 sec. 11-3 Recycling time: Flash-ready indicator: Flash-ready indicator lights on in viewﬁnder 11-4 ・...
Page 38 General Information 1)Setting precondition: In Creative Zone modes 11-12 Flash exposure 2) Compensation amount: Up to ±2 stops in 1/3- or 1/2-stop compensation: increments 3)Cancellation: Set exposure level to 0 4)Up to ±2 stops in 1/3- or 1/2-stop increments. ⑴ Flash exposure compensation for built-in ﬂash and Speedlite can be set with the camera.
Page 39 12-2 Flash auto: ⑴With EX-series Speedlites Compatible with all Speedlite features. ⑵ With Canon A-TTL/TTL autoﬂash external Speedlites Works in manual and stroboscopic modes and with external ﬂash. Does not ﬁre in A-TTL/TTL autoﬂash modes. Note 1: Does not work with Speedlites not having manual and stroboscopic modes.
Page 40 General Information Enabled with the 580EX, 550EX, 430EX, 420EX, MR-14EX, 12-5 Wireless ﬂash: MT24EX, or ST-E2. ⑴ Three-group (A, B, C) slave control, a ﬂash output ratio (A:B) control, FEB, and modeling ﬂash (with ﬂash output ratio) are enabled. ⑵ The 430EX and 420EX can be used as slaves only, and the MR-14EX and MT24EX can be used as the master unit only.
Page 41 General Information 1)Shooting information display (Camera Information) 14-3 Information display: Pressing the DISP button displays the following in a menu format: Date/time, Picture Style, Color space, WB correction amount/WB-BKT setting, auto rotate display, Auto power-oﬀ, automatic sensor cleaning, CF card remaining capacity Note: In the Basic Zone modes, items that cannot be set will not be displayed (ISO Auto is displayed).
Page 42 General Information 1)Manual 14-8 Rotated display: ・ With the menu's [Rotate], the image can be rotated clockwise in 90° , 270° and 0° . 2)Auto rotate ⑴Settable with the menu's [Auto rotate]. ⑵ When Auto rotate is [On (camera, PC)] and a vertical image is played back in horizontal orientation on the camera or on the computer screen (with compatible...
Page 43 CPD-series, BJD-series printers 17-3 Compatible printers: CPD: Card, L, postcard 17-4 Paper sizes: BJD: A4, L, 2L, card, postcard (when Japanese is selected) Canon-developed protocol 17-5 Transmission protocol: Data transfer system: Data transfer from camera to printer 17-6 CPD: YMC, BJD: JPEG ・...
Page 44 General Information 1)CPD: On-screen settings (single or split screen) 17-9 Style settings: BJD: Paper (L, 2L, postcard, A4, card) ＊BJD: If Japanese is not selected as the language, the choices will be Card#1, Card#2, Card#3, LTR, and A4 instead. 2)Borders (Borders or borderless) 3)Date (ON/OFF) Trim horizontally up to 8 steps, vertically up to 5 steps.
Page 45 Fine Art (Fine Art paper, photo rag), Semi-glossy (Super Photo paper, silky), Default (Photo Paper Plus Glossy) ⑴ Canon paper names (in Japan) are in parentheses above. ⑵ Selectable paper types may diﬀer depending on the printer. 1)With Canon printers: 18-6 Printing eﬀects...
Page 46 Selectable when A4 or 8.5×11" (Letter) is set (possible only with Canon printers compatible with this feature). ⑶ Print+shooting information can be set only when the paper size is 9×13cm or larger (possible only with Canon printers compatible with this feature.)
Page 47 General Information Date, ﬁle No., Both, Oﬀ, Default setting (set to Oﬀ by Canon 18-9 Date and ﬁle No. printers). imprinting: ・ If the printer cannot imprint the date, the date will not be imprinted even if this feature is enabled.
Page 48 General Information With a CPD/BJD printer or PictBridge printer connected, batch 19-5 Camera direct: printing of speciﬁed images is possible. ・Printed after the paper size and borders on/oﬀ are speciﬁed. 20．Direct Image Transfer Camera, PC (Windows / Macintosh), interface cable IFC- 20-1 Conﬁguration: 400PCU...
Page 49 General Information 21．Customization 11 Custom Functions with 29 settings settable with the 21-1 Custom Functions: camera. 22．External Interface USB 2.0 Hi-Speed, mini B port 22-1 Digital terminal: Video output terminal: Provided (NTSC/PAL) 22-2 Compatible with Remote Switch RS-60E3 (2.5 mm dia. mini- 22-3 Remote control jack)
Page 50 General Information Stainless steel and polycarbonate with glass ﬁber 24．Body (Chassis) Material 25．Exterior ABS resin, polycarbonate resin, polycarbonate resin with 25-1 Exterior material: special conductive ﬁber Titanium silver or satin black 25-2 Exterior color: CU 1/4 25-3 Tripod socket: 126.5 (W) × 94.2 (H) × (D) mm 26．Dimensions 4.98 (W) ×...
Page 51: 4．Nomenclature
General Information 4．NOMENCLATURE (FEATURES DIFFERENT FROM THE EOS KISS DIGITAL N ARE INDICATED IN BLUE.) 4.1 Nomenclature Hot shoe Mode Dial Flash-sync contacts Main Dial Built-in ﬂash Shutter button AF-assist beam Strap mount Red-eye reduction/ Flash button Self-timer lamp Remote control sensor Lens release button Grip Depth-of-ﬁeld preview...
Page 52: Dimensions
General Information 4.2 Dimensions Built-in ﬂash pop-up height Flash center 58.92 18.9 46.1 76.00 50.50 * Camera's oﬃcial dimensions in blue. * BG-E3: The *** dimensions apply when the BG-E3 is attached. It is measured from the center of the optical axis or tripod socket. 50.50 BG-E3: 51.9 Fig.
Page 55 General Information Table 005 Shooting Mode Feature Availability Drive Metering Built-in Flash External Exp. Shooting mode AF Point Selection AF-assist Comp. Auto Manual Flash OFF Red-eye SHOT SERVO FOCUS beam Auto Manual ① Full Auto ● ● ● ● ○ ●...
Page 58 General Information Description Color Basic Creative Item 0, ±1/3, ±2/3, ±1, ±1_1/3, ±1_2/3, ±2 (C.Fn-6-0) × ○ 0, ±1/2, ±1, ±1_1/2, ±2 (C.Fn-6-1) 0, ±1/3, ±2/3, ±1, ±1_1/3, ±1_2/3, ±2 (C.Fn-6-0) × ○ Flash exp comp 0, ±1/2, ±1, ±1_1/2, ±2 (C.Fn-6-1) WB correction: B: 9- 0-A: 9, M: 9- 0-G: 9 ×...
Page 59 General Information ２）Playback Menu Color Basic Creative Item Description Protect (→ Image selection screen/SET button: Protect, cancel) ○ ○ ○ ○ Rotate (→ Image selection screen/SET button: 90° →270° →0° ) Order → Image selection screen, quantity setting) Print Type Standard/Index/Both Set up Date...
Page 61 General Information Description Color Basic Creative Item English (English) Suomi (Finnish) Р у с с к и й (Russian) Deutsch (German) Italiano (Italian) 体中文 (Simpliﬁed Chainese) ○ ○ Language (→ Setting screen) Français (French) Norsk (Norwegian) 繁体中文 (Traditional Chinese) Nederlands (Dutch) Svenska (Swedish) (Korean) Dansk (Danish)
Page 65: System Accessory Compatibility
General Information 8.2. System Accessory Compatibility Note that the following system accessories have some restrictions when used with the EOS D REBEL XTI / EOS 400D D. Table 007 Accessories with Restrictions Interchangeable Lenses Lens Mount Converter FD-EOS Although it can be used with manual exposure, exposure error occurs.
Page 66: 9．Operation Cautions
General Information 9．OPERATION CAUTIONS 9.1 Agreed Answers for User Support Cautions Remarks [Imaging sensor] 1. When cleaning the CMOS sensor, use only a hand This is to prevent damage to the sensor. blower to blow off dust, etc. Never touch the CMOS surface with any brush, cloth, or cleaning agent.
Page 67 General Information Cautions Remarks [Flash] 11. With EOS-dedicated Speedlites other than the EX- This camera it does not have a ﬂash exposure sensor series, autoﬂash is not possible. compatible with A-TTL/TTL. (The ﬂash will not ﬁre in the A-TTL/TTL autoﬂash mode. Use the manual ﬂash mode instead.
Page 69 Technical Information CONTENTS Page Technical Information 1．Technical Description …………………………………………………………………… 1 1.1 Image sensor・CMOS sensor ……………………………………………………… 1 1.2 Image recording and processing ………………………………………………… 3 1.3 Dust reduction feature …………………………………………………………… 5 1.4 AF system …………………………………………………………………………… 8 1.5 Viewﬁnder ……………………………………………………………………………11 1.6 Exposure control ……………………………………………………………………11 1.7 Drive …………………………………………………………………………………12 1.8 Built-in ﬂash …………………………………………………………………………13 1.9 LCD monitor and basic operation concept ………………………………………14...
Page 70: 1．Technical Description
1.1 Image sensor・CMOS sensor １）Overview The large CMOS sensor (Fig. 001) developed and manufactured by Canon has enabled the camera to attain the top overall performance in its class. It features high resolution (approx. 10.10 eﬀective megapixels), wide ISO speed range (ISO 100-1600), and low noise.
Page 71 Technical Information ４）Energy saving To minimize the increased power consumption due to the high-speed reading, the output amp's power consumption was absolutely minimized. Also, during long exposures, power to the output amp is cut oﬀ and the standard current for the circuit drive is also cut oﬀ as with the EOS KISS DIGITAL N.
Page 72: Image Recording And Processing
− ＋JPEG ＊ The number of possible shots is based on Canon's testing standards and 512MB CF card. ＊ The single image size and number of possible shots will vary depending on the subject, shooting mode, ISO speed, Picture Style, etc.
Page 73 Technical Information 2）Noise reduction feature As with the EOS 5D and EOS 30D, Custom Function C.Fn-02 [Long exp. noise reduction] can be set to [Auto] or [On]. [1: Auto] If the exposure time is 1 sec. or longer, detection of noise caused by the long exposure or high air temperature (spots or red fringing at image corners) is performed.
Page 74: Dust Reduction Feature
Technical Information 1.3 Dust reduction feature １）Overview Digital SLRs having interchangeable lenses are susceptible to dust entering the camera when the lens is changed. The dust can then adhere to the imaging sensor and show up as dust spots on the images. A feature to remove dust on the sensor has been most desirable. The EOS D REBEL XTI / EOS 400D D incorporates a three-step, dust-reduction feature to eﬀectively remove dust spots from images.
Page 75 Technical Information perimeter to keep out dust. ＊ Absorbent material: This is industrial-grade, double-sided tape. It does not lose its stickiness even after alot of dust adheres to it. Also, compared to a rival manufacturer's dust-removal system which uses a vibrating glass, the EOS D REBEL XTI / EOS 400D D uses low-pass ﬁlter 1 which vibrates directly to shake oﬀ...
Page 78 Technical Information ・Two-line focusing with the center AF point's horizontal-line sensitive sensor at f/5.6 The center AF point's horizontal-line sensitive sensor for f/5.6 has a two-line, zigzag pattern. By having redundant focusing, the focusing detection becomes more consistent. ・Improved AF precision with ﬁne-tuning As with the EOS 30D, ﬁne-tuning has been incorporated to improve the AF precision.
Page 79 Technical Information ４）AI SERVO AF ⑴Predictive AF With an EF300mm f/2.8L IS USM lens, the camera can focus-track a moving subject approaching at 50 kph up to about 10 meters/32.8 feet away. The predictive AF calculation is the same as with the EOS KISS DIGITAL N. ⑵Still subjects As with the EOS 30D, the lens drive keeps still when focusing a still subject with AI SERVO AF.
Page 81: Drive
RAW＋L/F Max. Burst [Approx.] ＊ The ﬁgures above are based on Canon's testing standards with a 512MB CF card. (The ﬁgures can also vary depending on the CF card.) ＊ As with the EOS KISS DIGITAL N, image processing occurs even during continuous shooting. This increases the maximum burst.
Page 82: Built-In Flash
Technical Information ⑶Custom Function : LCD display when power is switched on With the C.Fn-11-1 set to [Retain power OFF status] (Fig. 021), the camera settings will not be displayed. This will increase the number of possible shots to the same level as the EOS KISS DIGITAL N.
Page 85: Camera Direct Printing/Print Order (Dpof)
Technical Information ３）Image playback The EOS D REBEL XTI / EOS 400D D can now display a magniﬁed view during the image review immediately after shooting. Automatic image rotation and the RGB histogram display are also provided. Other than the above, the image playback speciﬁcations are the same as the EOS KISS DIGITAL N's.
Page 86: Internal Construction
Technical Information 1.13 Internal construction １）Exterior covers and internal construction The camera body construction is almost the same as the EOS KISS DIGITAL N's. A stainless steel chassis and a mirror box made of high-strength engineering plastic make the body as strong as the EOS KISS DIGITAL N's body (Fig. 028). As with the EOS KISS DIGITAL N, the camera's top, front, and rear covers are made of special engineering plastic for lightweight, high strength, and electromagnetic shielding.
Page 87 Technical Information ３）Shutter-release mechanism The shutter-release mechanism, release stroke, torque (Table 010), and shutter-release time lag are the same as the EOS KISS DIGITAL N's. Table 010 Shutter-release stroke and pressure State Stroke Pressure Shutter button protrusion 0.78mm ― Standby position to SW-1 ON 0.5mm 0.1kgf SW-1 ON to SW-2 ON...
Page 88 Technical Information SI prism Pentamirror Metering lens (Hollow) Metering sensor Eyepiece lens 1 Eyepiece lens 2 Built-in ﬂash Eyepiece lens 3 Self Cleaning Sensor Unit LCD panel Focusing Main board screen LCD monitor Imaging sensor Main mirror Low-pass ﬁlter Secondary mirror Shutter AF mirror AF sensor...
Page 89 Technical Information Built-in ﬂash unit Hot shoe Flash pop-up mechanism SI unit Dioptric adjustment mechanism Metering sensor Mode Dial Pentamirror Power switch Flash exposure sensor Audio element Viewﬁnder information LCD Shutter button Focusing screen Main Dial Display-oﬀ sensor Drive motor Video OUT terminal CF card slot Remote control terminal...
Page 90 Copyright Canon Inc. retains the copyright to this Service Manual. Reproduction, publication (including on the World Wide Web), alteration, translation into another language, or other use of the data in whole or part, contained on this Service Manual without the written consent of Canon Inc. is prohibited.
Page 91 Repair Information CONTENTS Page Repair Information 1. REPAIR PREPARATIONS ............1 1.1 Initial Check List .
Page 94 Repair Information ２） Mirror Cleaning Make sure that the adhesiveness of the main mirror and the sub-mirror has not decreased, and then blow oﬀ the dust with a blower. Clean up dust that was not blown oﬀ with lens tissue soaked with a small amount of Ethanol. (If too much Ethanol is applied, the adhesiveness of the main mirror becomes weak.) Fig.
Page 101: Self Cleaning Sensor Unit
Repair Information 1.8 Self Cleaning Sensor Unit Prior to developing this unit, we analyzed the causes of visible dust and their types and sizes. The dust becomes most noticeable at small apertures. We studied what sizes of dust were the worst oﬀenders at small apertures. The Self Cleaning Sensor Unit was then developed to eﬀectively eliminate those types of dust.
Page 102: Repair Tools And Material List
Repair Information 1.9 Repair Tools and Material List The following tools and materials are required for camera reassembly and adjustment. １） Tools List Name Part No. SOLDER, LEAD FREE (RMA-98 SUPER) CY9-4045-000 SOLDER WICK NO.2/NO3 (1.5MM/2MM) CY9-1036-001/002 SHEET CONDUCTIVE CY9-1061-000 STRAP, WRIST (EARTH) CY9-6158-000 LIQUID DISPENSER...
Page 128: Disassembly Of The Front Cover Ass'y
Repair Information 2.7 Disassembly of the Front Cover Ass'y M1.7 ℓ=3.5mm ×2 Fig. 120 Disassembly of the Front Cover Ass'y...
Page 129: Disassembly Of The Top Cover Ass'y
Repair Information 2.8 Disassembly of the Top Cover Ass'y ★ Apply Bond 1401C to between the plate and the screw end after fastening the screw. １） ★ Attach the Spring Plate M2.5 Diabond No. 1663G ℓ=3.8mm ×4 ２） ★Grease NK-74C ★...
Page 134 Copyright Canon Inc. retains the copyright to this Service Manual. Reproduction, publication (including on the World Wide Web), alteration, translation into another language, or other use of the data in whole or part, contained on this Service Manual without the written consent of Canon Inc. is prohibited.
Page 135 Adjustments CONTENTS Page Adjustments 1. REPAIR PREPARATIONS ………………………………………………………………… 1 1.1 Pre-Adjustment Notes ……………………………………………………………… 1 1.2 Tools List …………………………………………………………………………… 1 1.3 Locally-Made Tools ………………………………………………………………… 3 2. MECHANICAL ADJUSTMENTS …………………………………………………………… 4 2.1 Flange to Focal Plane Distance (FFD) Adjustment ……………………………… 4 2.2 Finder Focus Adjustment ………………………………………………………… 8 3.
Page 136: Repair Preparations
1.1 Pre-Adjustment Notes 1）Firmware Upgrade When the ﬁrmware version is upgraded, be sure to download a new version from the Canon site and make sure it is copied to a CF card without fail. Then, perform upgrade. 2） Before Starting the Adjustment Before starting the adjustment, check the luminance of the EF-1 Multi Camera Tester or EF8000 with BM-3000.
Page 137 Adjustments Name Part No. Purpose Video light Local Purchase AF adjustment Tool Battery DR-700 CY9-7125-000 Inhibits voltage check Stand, AF/AE Positioning CY9-7126-000 AF/AE Sensor Positioning Gauge, AF/AE Positioning CY9-7126-001 AF/AE Sensor Positioning Light Box, AF/AE Positioning CY9-7126-002 AF/AE Sensor Positioning Luminance Meter CY9-7052-001 EF-1 Multi-camera Tester Calibration...
Page 148 Pg. 1 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL (See Pg.2) CB3-3160 x2 (S) CB3-3219 (S) CB3-1815 x2 (B) CB3-2339 (B) CB3-3219 x2 (S) CB3-2339 x2 (B) (See Pg.9)
Page 149 P A R T S L I S T Pg. 1 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB3-1815-000 000 SCREW CB3-2112-000 000 SCREW CB3-2339-000 000 SCREW, M3X5(BLACK) CB3-2392-000 000 CASE, BATTERY CB3-2468-000 000 SCREW, M3X2(BLACK) CB3-3149-000 000 WINDOW, TFT DISPLAY...
Page 150 Pg. 2 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL CB3-1086 CB3-3135 CB3-3221 CB3-2114 CG2-1848 (S) CG2-1849 (B) CB3-3218 (S) CB3-2113 (B) (See Pg.8) CB3-2347 (See Pg.3) (See Pg.7)
Page 151 P A R T S L I S T Pg. 2 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB3-1086-000 000 SCREW CB3-2112-000 000 SCREW, M3X3(BLACK) CB3-2113-000 000 SCREW, M3X4.5(BLACK) CB3-2114-000 000 SCREW, M3X6(BLACK) CB3-2115-000 000 SCREW, M3X4.5(BLACK) CB3-2229-000 000 HOLDER, FOCUSING SCREEN...
Page 152 Pg. 3 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL (See Pg.4) CB2-0682 CG2-1869 (See Detail ) XA4-9170-507 VD7-2241-501 CY3-1567 XA1-7170-167 CH2-8432 CG2-1871 WS1-6384 CG2-1840 XA1-7170-167...
Page 153 P A R T S L I S T Pg. 3 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB2-0682-000 （XXX） C WASHER, FB ADJ. CB3-2808-000 000 SCREW CB3-3157-000 000 PLATE, TRIPOD SOCKET CB3-3170-000 000 CASE, MAIN PCB SHIELD CB3-3717-000 000 SHEET, NOISE PREVENTION...
Page 154 Pg. 4 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL XA1-3170-227 XA4-9170-457 CB3-3156(S) CG2-1868 XA1-3170-227 CB3-3250(B) CH1-8436 CB3-3156(S) CH2-8400 XA4-9170-457 CB3-3250(B) CH1-8440 CB3-1706 CH2-8401 XA4-9170-407 CG2-1843...
Page 155 P A R T S L I S T Pg. 4 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB3-1706-000 000 CUSHION, MIRROR CB3-3156-000 000 HOLDER, STRAP (SILVER) CB3-3250-000 000 HOLDER, STRAP (BLACK) CG2-1835-000 000 PCB ASS'Y, ACTIVE SWEEP DEVICE CG2-1843-000 000 PCB ASS'Y, FLASH...
Page 156 Pg. 5 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL CG2-1874 XA4-9170-457 XA4-5170-307 CG2-1878 CB3-3127 CG2-1876 CG2-1860 XA4-9170-407 Do not use XA4-9170-307 this screen XA4-9170-309 CB3-2214...
Page 157 P A R T S L I S T Pg. 5 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB1-4085-000 000 SCREW, M2X6.5 CB3-1700-000 000 MOUNT CB3-2214-000 000 CUSHION, MIRROR CB3-2403-000 000 STOPPER, SUB MIRROR CB3-3127-000 000 HOLDER, SPC CF1-1948-000 000...
Page 159 P A R T S L I S T Pg. 6 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB3-2267-000 000 COVER, CABLE(BLACK) CB3-2386-000 000 HINGE, BATTERY COVER CB3-3183-000 000 COVER, CABLE(SILVER) CB3-3209-000 000 TAPE, DOUBLE SIDE BODY CG2-1838-000 000 FPC ASS'Y, DOOR SWITCH XA1-3170-227 000...
Page 160 Pg. 7 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL CB3-3141 (S) CB3-3240 (B) XD2-1100-172 CB3-3140 (S) CB3-2424 (B) XA4-9170-357 CS5-0263 CB3-3142 (S) CB3-2329 (B) CB3-3137...
Page 161 P A R T S L I S T Pg. 7 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB3-2329-000 000 BUTTON, UNLOCK CB3-2424-000 000 BUTTON, PREVIEW CB3-3137-000 000 COVER, GRIP CB3-3140-000 000 BUTTON, PREVIEW CB3-3141-000 000 BUTTON, FLASH POP-UP(SILVER) CB3-3142-000 000...
Page 162 Pg. 8 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL CB3-3213 (S) CB3-2409 CB3-3253 (B) CA1-9328 CB3-2410 (S) CB3-1418-001 (B) CB3-2411 CG2-1854 (WC2-5462) XA4-9170-407 Those parts illustrated without parts numbers are N.S parts.
Page 163 P A R T S L I S T Pg. 8 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CA1-9328-000 000 SPRING, PLATE (BL) CB3-1418-001 000 SHOE, ACCESSORY CB3-2409-000 000 SCREW, M2.5X3.8 CB3-2410-000 000 SHOE, ACCESSORY, S CB3-2411-000 000 BASE, ACCESSORY SHOE CB3-3213-000 000...
Page 164 Pg. 9 REF. NO. C12-6151, 2 C12-6153, 4 CANON DIGITAL CAMERA EOS KISS DIGITAL X C12-6155, 6 EOS DIGITAL REBEL XTI EOS 400D DIGITAL XA4-9170-457 CG2-1896 CG2-1850 (S) CG2-1851 (B) CH2-8399 XA4-9170-357 CG2-1837 CB3-2323 CB3-3153 (S) CB3-3247 (B) CB3-3146 (S)
Page 165 P A R T S L I S T Pg. 9 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. CLASS QTY DESCRIPTION CB3-2323-000 000 COVER, AE/FP SELECT BUTTON CB3-2348-000 000 TAPE, TFT GROUNDING CB3-3145-000 000 BUTTON, MODE(SILVER) CB3-3146-000 000 BUTTON, AV(SILVER) CB3-3147-000 000 BUTTON, SET SELECT(SILVER)
Page 167 P A R T S L I S T Pg. 10 B A T T E R Y C H A R G E R C B - 5 L REF. NO. C84-1078-000 PARTS NO. CLASS QTY DESCRIPTION C84-1078-000 DC COUPLER DR-700 V I D E O C A B L E V C - 1 0 0 REF.
Page 168 I N D E X O F P A R T S L I S T Pg. 11 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. PAGE PARTS NO. PAGE CA1-9328-000 000 CB3-3139-000 000 CB1-4085-000 000 CB3-3140-000 000 CB2-0682-000 (XXX) CB3-3141-000 000 CB3-1086-000 000...
Page 169 I N D E X O F P A R T S L I S T Pg. 12 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. PAGE PARTS NO. PAGE CB3-3240-000 000 CG2-1872-000 000 CB3-3242-000 000 CG2-1874-000 000 CB3-3243-000 000 CG2-1876-000 000 CB3-3244-000 000...
Page 170 I N D E X O F P A R T S L I S T Pg. 13 REF. NO. C12-6151, 2 C12-6153, 4 C12-6155, 6 PARTS NO. PAGE PARTS NO. PAGE XA4-9170-257 000 XA4-9170-307 000 XA4-9170-307 000 XA4-9170-307 000 XA4-9170-309 000 XA4-9170-357 000 XA4-9170-357 000...
Page 171 Copyright Canon Inc. retains the copyright to this Service Manual. Reproduction, publication (including on the World Wide Web), alteration, translation into another language, or other use of the data in whole or part, contained on this Service Manual without the written consent of Canon Inc. is prohibited.
Page 172 Circuit Diagrams CONTENTS Circuit Diagrams 1. WIRING DIAGRAM LEADWIRE LAYOUT 2. BLOCK DIAGRAM 2-1 GENERAL 2-2 POWER SUPPLY 3. PCB DIAGRAM 3-1 ASD PCB 3-2 IF PCB 3-3 MAIN PCB 3-4 MD PCB 3-5 ST PCB 3-6 AE FPC 3-7 AF FPC 3-8 ASM FPC 3-9 BM FPC 3-10 DRSW FPC...
Page 173: Wiring Diagram Leadwire Layout
C12-6153, 4 C12-6155, 6 MAIN-I/F ① ⑤ PARTS No. REMARK ① CH2-8432 MAIN-I/F ② CH2-8431 MD-MAIN ③ CH2-8400 MD-FLASH ④ CH2-8401 ⑤ CH2-8399 ④ CMOS ③ ② MOTER CONTACT ASS Y, MOUNT Tri. coil SEP., 2006 © CANON INC., 2006...
Page 174: Block Diagram
LGSEL AFIC REM-CON LGRIP BATSEL0 HV1,2 BATSEL1 LR6×6 DCDC Li-ion VIDEO_DET NB-2LH USB_DET CR2016 JUMP、ERASE DIGIC Ⅱ LCD_DR ADIC CMOS V-DR VIDEO SCSS ED-LED -DRV USB2.0 CF-LED Display Oﬀ DOWN Sensor Conv SDRAM FROM SEP., 2006 © CANON INC., 2006...
Page 177: If Pcb
3. PCB DIAGRAM REF. NO. C12-6151, 2 3-2 IF PCB C12-6153, 4 C12-6155, 6 SIDE A SIDE B SEP., 2006 © CANON INC., 2006...
Page 178: Main Pcb
3. PCB DIAGRAM REF. NO. C12-6151, 2 3-3 MAIN PCB C12-6153, 4 C12-6155, 6 SIDE A SIDE B FUSE FU02 SEP., 2006 © CANON INC., 2006...
Page 179: Md Pcb
3. PCB DIAGRAM REF. NO. C12-6151, 2 3-4 MD PCB C12-6153, 4 C12-6155, 6 SIDE A SIDE B FUSE FU_BAT SEP., 2006 © CANON INC., 2006...
Page 180: St Pcb
3. PCB DIAGRAM REF. NO. C12-6151, 2 C12-6153, 4 3-5 ST PCB C12-6155, 6 SIDE A SIDE B FLASH CHARGE INHIBIT DISCHARGE POSITION SEP., 2006 © CANON INC., 2006...
Page 192 Copyright Canon Inc. retains the copyright to this Service Manual. Reproduction, publication (including on the World Wide Web), alteration, translation into another language, or other use of the data in whole or part, contained on this Service Manual without the written consent of Canon Inc. is prohibited.
Page 193 Software Information CONTENTS Page Software Information 1．EOS DIGITAL SOLUTION DISK Ver. 13 ......... . 1 1.1 Development Objectives .
Page 194: 1．Eos Digital Solution Disk Ver. 13
RAW images. ●High-speed processing of RAW images ・ High-speed RAW image display and processing using Canon's own powerful algorithms ・Processing with high image quality using the latest genuine Canon algorithms ●Support for RAW images from almost all EOS DIGITAL camera models...
Page 195 ・Easy-PhotoPrint + Canon inkjet printer ・Easy-PhotoPrint Pro + new Canon inkjet printer (to be released in 2006) ・Dedicated Plug-In software + new Canon L printer (to be released in 2006) ●3 printing style speciﬁcation functions ・ Single-page printing (automatic settings), Single-page printing (shooting information, captioning, ﬂexible layout), contact sheet printing...
Page 196 ・Exporting of shooting information ・Exporting images as screensavers or wallpaper ・Writing images to CD-R or CD-RW ●Various types of connection to Canon iMAGE GATEWAY ●Linking with e-mail software to send images as e-mail attachments ●Support for Color Management System ・Supports 2 types of work color space (sRGB and Adobe RGB)
Page 197: Software Conﬁguration And System Requirements
Software Information ４）RAW Image Task Ver. 2.4 ●RAW image processing software linked to ZB/IB ・ Allows RAW images selected in ZB/IB to be processed and displayed in RAW Image Task ・ Allows the user to apply image adjustments to RAW images (using processing parameter settings) with no loss of image quality ●Processing faithful to the camera ・...
Page 198 400D D camera. All applications in EOS DIGITAL Solution Disk Ver. 13 will be uploaded in the Canon's web site as usual, so that the users can download them. The EOS DIGITAL Solution Disk Ver. 13 Instruction Manual (PDF) will be supplied on a separate documentation CD.
Page 199: Software Overview And Improvements
Software Information Table 004 System Requirements for Macintosh ImageBrowser, Digital Photo Software EOS Utility CameraWindow MC, Professional RAW Image Task, PhotoStitch Mac OS X 10.2 to 10.4 Macintosh equipped with a FireWire (IEEE1394) port or USB port as a Model Macintosh with one of the above OS installed standard feature and one of the above OS installed...
Page 203 This is JPEG panorama image merging software that runs in conjunction with 3) or 4). This software is bundled with all Canon digital camera models. This is the same version as the software bundled with all Canon digital cameras released in Spring 2006.
Page 204 Copyright Canon Inc. retains the copyright to this Service Manual. Reproduction, publication (including on the World Wide Web), alteration, translation into another language, or other use of the data in whole or part, contained on this Service Manual without the written consent of Canon Inc. is prohibited.
Page 205 Appendix CONTENTS Page Appendix 1. INHIBIT VOLTAGE MEASURING PROCEDURE ………………………………………… 1 1. 1 Preparation of Resistance Part …………………………………………………… 1 1. 2 Total Resistance Checking Procedur …………………………………………… 1 1. 3 Checking Procedure of Residual Battery Display ……………………………… 3 2. FACTORY DEFAULT SETTINGS ………………………………………………………… 4 3.
Page 209 Appendix 2． FACTORY DEFAULT SETTINGS Setting Item JAPAN North America Europe and others Image-recording quality Large Fine Red-eye On/Oﬀ Oﬀ Beep Shoot w/o card ±0 Flash exp comp ±0 White Balance WB SHIFT/BKT ±0 Custom WB Factory Default Data Color space sRGB Picture Style Standard...
Page 210: Exterior Color Comparison
Appendix 3．EXTERIOR COLOR COMPARISON 銀モデル黒モデル銀モデル黒モデル Silver Model Black Model Silver Model Black Model 側面（右）側面（左） Right Side Left Side 底面上面 Bottom 正面背面 Front Back...

This manual is also suitable for:

Eos 400d digital Eos kiss digital x

Canon EOS DIGITAL REBEL XTI Service Manual

Table of Contents

Table of Contents

Repair Information

Table of Contents

Circuit Diagrams

Quick Links

Chapters

Related Manuals for Canon EOS DIGITAL REBEL XTI

Summary of Contents for Canon EOS DIGITAL REBEL XTI

This manual is also suitable for:

Table of Contents