hit counter code
Hitachi B 16RM Instruction Manual And Safety Instructions
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Power Tool
  5. B 16RM
  6. Instruction manual and safety instructions

Hitachi B 16RM Instruction Manual And Safety Instructions

Hide thumbs Also See for B 16RM:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Model

Drill Press

B 16RM
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
WARNING
Improper and unsafe use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
before operating the power tool. Please keep this manual available for others before they use the power
tool.
N136

Advertisement

Table of Contents
loading

Related Manuals for Hitachi B 16RM

Summary of Contents for Hitachi B 16RM

  • Page 1: Drill Press

    Model Drill Press B 16RM INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS WARNING Improper and unsafe use of this power tool can result in death or serious bodily injury! This manual contains important information about product safety. Please read and understand this manual before operating the power tool.

  • Page 2: Table Of Contents

    English CONTENTS English SECTION PAGE Product Specifi cations ............................3 Power Tool Safety .............................. 4 Drill Press Safety..............................5 Electrical Requirements And Safety ........................6 Accessories and Attachments ........................... 7 Tools Needed For Assembly ..........................7 Carton Contents..............................7 Know Your Drill Press ............................9 Glossary of Terms ............................

  • Page 3: Product Specifi Cations

    English WARNING Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead based paints • Crystalline silica from bricks, cement and other masonry products •...

  • Page 4: Power Tool Safety

    English POWER TOOL SAFETY WARNING Before using your drill press, it is critical that you read and understand these safety rules. Failure to follow these rules could result in serious injury or damage to the drill press. Good safety practices are a combination of common 15.

  • Page 5: Drill Press Safety

    English DRILL PRESS SAFETY 13. SECURE THE WORK. Use clamps or a vise to hold WARNING the work when practical. It’s safer than using your hand and it frees both hands to operate tool. For your own safety, do not try to use your drill press or plug it in until it is completely assembled and installed 14.

  • Page 6: Electrical Requirements And Safety

    English ELECTRICAL REQUIREMENTS AND SAFETY CONNECTING TO THE POWER SUPPLY Check that the power supply and plug used is in accordance with your drill press. Have a look at the rating plate of the motor or the rating on the drill press. Any changes should always be carried out by a qualifi ed electrician. WARNING This machine must be earthed.

  • Page 7: Accessories And Attachments

    English ACCESSORIES AND ATTACHMENTS RECOMMENDED ACCESSORIES WARNING WARNING Use only accessories designed for this drill press to avoid injury from broken parts or thrown Visit your Hardware Department or see the Power workpieces. and Hand Tools Catalog to purchase recommended accessories for this power tool.
  • Page 8 English UNPACKING YOUR DRILL PRESS — 8 —...

  • Page 9: Know Your Drill Press

    English KNOW YOUR DRILL PRESS Cover knob Belt guard cover Belt pulleys Belt tension handle Belt tension lock knob Belt tension knob ON/OFF switch Laser guide Upper stop nut Lower stop nut Feed handles Depth scale Chuck Column collar Depth stop Stop nut Head locking set screws Motor...

  • Page 10: Glossary Of Terms

    English GLOSSARY OF TERMS BASE – Supports drill press. For additional stability, holes DRILL BIT – The cutting tool used in the drill press to are provided in base to bolt drill press to fl oor. make holes in a workpiece. BACKUP MATERIAL –...

  • Page 11: Assembly And Adjustments

    English ASSEMBLY AND ADJUSTMENTS ESTIMATED ASSEMBLY TIMES 20~40 MINUTES Fig. B ASSEMBLY INSTRUCTIONS WARNING For your own safety, never connect plug to power source outlet until all assembly and adjustment steps are completed, and you have read and understood the safety and operating instructions.
  • Page 12 English INSTALLING THE HEAD (FIG. D) INSTALLING THE CHUCK (FIG. F, G and H) WARNING WARNING The Drill Press head is very heavy and MUST be lifted Before any assembly of the chuck and arbor to the with the help of 2 PEOPLE OR MORE to safely assemble drill press head, clean all mating surfaces with a the Drill Press head on the column.
  • Page 13 English 5. Using a rubber mallet, plastic-tipped hammer, or a WARNING block of wood and a hammer, fi rmly tap the chuck upward into position on the spindle shaft. To prevent personal injury, always disconnect the plug from the power source when making any adjustment. Fig.
  • Page 14 English SPINDLE / QUILL (FIG. L) Fig. M Rotate the feed handles counterclockwise to lower spindle to its lowest position. Hand support the spindle securely and move it back and forth around the axis. If there is play, do the following: 1.

  • Page 15: Operation

    English THE LASER GUIDE 2. Scribe a round circle (approx. 1/8 inch (3.175mm)) on Your tool is equipped with our latest innovation, the Laser a piece of scrap wood. Guide, a battery powered device using Class II laser 3. Insert a drill bit into the chuck and tighten. beams.
  • Page 16 English THE NO VOLT RELEASE (NVR) SWITCH FOR Fig. Q-2 THE DRILL PRESS (FIG. Q, Q-1, Q-2)-ONLY FOR SINGAPORE, MALAYSIA, INDONESIA, SAUDI ARABIA Your drill press is equipped with a No Volt Release (NVR) switch with emergency stop cover. This device can provide to stop the dill press immediately in urgent condition.
  • Page 17 English INSTALLING A DRILL BIT IN THE CHUCK (FIG. R) Depth scale method 1. With the switch “OFF” and the safety key removed, Note: With the chuck quill assembly fully retracted the open the chuck jaws (1) using the chuck key (2). tip of the drill bit must be just slightly above the top of the Turn the chuck key counterclockwise to open the workpiece.
  • Page 18 English REMOVING CHUCK AND ARBOR (FIG. U) a. Always position BACKUP MATERIAL (used 1. With the switch “OFF” and the unit unplugged, adjust beneath workpiece) so that it contacts the left side the depth stop nut (1) to hold the drill at a depth of the column.
  • Page 19 English POSITIONING THE TABLE AND WORKPIECE (FIG. V TILTING THE TABLE (FIG. Z) AND Y) NOTE: The table arm and support (1) has a predrilled 1. Lock the table (1) to the column (2) at a position so hole with a locking set screw inserted for locking the table the tip of the drill bit (3) is just above the top of the into a predetermined 0°...

  • Page 20: Maintenance

    English MAINTENANCE MAINTAINING YOUR DRILL PRESS WARNING For your own safety, turn the switch “OFF” and remove the plug from the power source outlet before maintaining or lubricating your drill press. Frequently blow out, using an air compressor or dust vacuum, any dust that accumulates inside the motor.

  • Page 21: Troubleshooting Guide

    To avoid injury from an accidental start, turn the switch “OFF” and always remove the plug from the power source before making any adjustment. • Consult Hitachi Authorized Service Center if for any reason the motor will not run. SYMPTOM POSSIBLE CAUSES...
  • Page 22 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ • " " " " " ." " ." " ." " " " ." " ." " ." ." " — —...
  • Page 23 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ — —...
  • Page 24 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ (Y V 0° .(4) .(3) .(4) .(3) .0° — —...
  • Page 25 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ "OFF" " .(" .(3 2) "OFF" 2580 2580 2580 2580 2580 1580-2580 830-1580 1580-2580 500-540 830-1580 1580-2580 1580-2580 320-500 500-540 830-1580 830-1580 320-500 1580-2580 500-540 500-540 — —...
  • Page 26 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ ) "OFF" .(2) "OFF" .(1) .(4) "ON" "OFF" ) "OFF" .(3) — —...
  • Page 27 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ (NVR) -(Q-2 Q-1 Q (NVR) (NVR) " I " (Q-1 "O" -(Q-3 " I " "OFF / ON" (Q-1 - 2) ) "ON" ) "OFF" "OFF" "ON" "OFF" (Q-2 -3) ( ) "OFF" ) "OFF" — —...
  • Page 28 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ ( 3.175) 1/8) • • • .(2) • • • ) ON/OFF DIODE 1> • .(3) 21CFR 1040.10 670-630:LASER .1040. 11 /1350 /500 /210 /1580 /540 /280 /2180 /830 /320 /2580 /1290 /420 210/min 280/min 320/min 420/min 500/min 540/min ‫ﺣﺰﺍﻡ‬...
  • Page 29 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ .(1) .(1) ) "OFF" ( 12.7) .(2) .(3) ) "OFF" — —...
  • Page 30 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ :(6) ) (1) .(6) .(5) .(5) 0° — —...
  • Page 31 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ .(2) ) .1 .(5) .(3) ) (6) — —...
  • Page 32 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ .(2) .(7) (C-1 1.5 3A (C B .(4) — —...
  • Page 33 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ – – – – – – ." " " " – – – – – . – – – – – 0° – – .45° – – – – – – – (( 5/8) ( 16) 5/8 ( – –...
  • Page 34 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ ON/OFF 0° — —...
  • Page 35 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ — —...
  • Page 36 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ .WD-40 — —...
  • Page 37 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ — —...
  • Page 38 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ ( ... — —...
  • Page 39 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ .ANSI Z87.1 ANSI Z87.1 ..— —...
  • Page 40 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ • • • 13-15/64 × 13-15/64 ......( 380) 15........( 336 × 336) ( 16) 5/8......45 ....../2,580-210 12 ..... ( 85) 3-11/32 ....50 / 240-220........( 190.5) 7-1/2 ........750....20-3/8 × 11 ......3.6....... ( 518 ×...
  • Page 41 ‫ﺍﻟﻌﺭﺑﻳﺔ‬ 40 ............................... 39 ..............................38 ..............................37 ............................36 ..............................36 ............................36 ................................. 34 ............................33 ..............................32 ................................ 28 ..............................23 .................................. 22 ........................... 42 ................................— —...

  • Page 42: Parts List

    PARTS LIST-FOR AUSTRALIA AND NEW ZEALAND 15 in. (380mm) DRILL PRESS PARTS LIST MODEL NO. B16RM PARTS LIST FOR SCHEMATIC Always order by I.D. Number Parts No. I.D. Description Size QTY Parts No. I.D. Description Size 726323 0607 SWITCH BOX 726521 0JKH V-BELT...
  • Page 43 15 in. (380mm) DRILL PRESS MODEL NO. B16RM SCHEMATIC-FOR AUSTRALIA AND NEW ZEALAND — —...
  • Page 44 PARTS LIST-FOR SINGAPORE MALAYSIA INDONESIA SAUDI ARABIA 15 in. (380mm) DRILL PRESS PARTS LIST MODEL NO. B16RM PARTS LIST FOR SCHEMATIC Always order by I.D. Number Parts No. I.D. Description Size QTY Parts No. I.D. Description Size 326402 04A5 CLAMP-CORD 726557 0K7K CR.
  • Page 45 15 in. (380mm) DRILL PRESS MODEL NO. B16RM SCHEMATIC-FOR SINGAPORE MALAYSIA INDONESIA SAUDI ARABIA (For Singapore, Malaysia & Saudi Arabia) (For Indonesia) — —...
  • Page 46 — —...
  • Page 47 — —...
  • Page 48 Issued by Hitachi Koki Co., Ltd. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo 108-6020, Japan Code No. C99134751 Printed in China...

Table of Contents