Page 1
Instructions for the Use and Care and Installation of ORT60X ORT90X Slide-out Rangehoods...
Page 2
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Omega reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available.
Page 3
WARNING Young children should be supervised to ensure that they do not play with the appliance. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervised or instruction concerning use of the appliance by a responsible person for their safely.
Page 4
1. INSTALLATION INSTRUCTIONS There are two methods to install the cooker hood: Method one: mounted on the wall: 1) The cooker hood should be placed at a distance of 65-75cm from the cooking surface for best effect. 2) To install onto the wall drill 4 holes of Ø8mm on a suitable place according with the centre distance of hole in the back of the cooker hood.
Page 6
2. OPERATION 1) Push the “Low” button, the indicating light 1 is on, and the motor runs at low speed. Push it again and the motor will stop. 2) Push the “Mid” button, the indicating light 2 is on, and the motor runs at mid speed. Push it again and the motor will stop.
Page 7
3. USE AND MAINTENANCE 1) It is recommended to operate the appliance prior to cooking. 2) There shall be adequate ventilation of the room when the cooker hood is used at the same time as appliances burning gas or other fuels(not applicable to appliances that only discharge the air back into the room.
Page 8
4. SPECIFICATION Voltage 220V-240V~/50Hz Rated Input Power 305W Rated motor input power 265W Illumination 20W+20W (halogen lights) Airflow 1000m Noise 65dBA Outlet diameter 150mm...