Related Manuals for NEC LCD1770NX-BK(A)
Summary of Contents for NEC LCD1770NX-BK(A)
- Page 1 User's Manual LCD1770NX-BK(A) MultiSync LCD1770V MultiSync LCD1770NX MultiSync LCD1770NXM...
-
Page 2: Table Of Contents
Index Warning ........................1 Contents ......................... 2 Sound bar Setup ....................3 Display Setup ......................4 Mounting ........................ 8 Flexible Arm Installation ..................9 Controls ........................ 10 Recommended Use ....................12 Specifications ...................... 14 Features ......................... 17 Troubleshooting ....................18 References ...................... -
Page 3: Warning
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. -
Page 4: Contents
Contents Your new NEC MultiSync LCD monitor box* should contain the ® following: • MultiSync LCD1770V, LCD1770NX, or LCD1770NXM monitor with height adjustable stand • Power Cord • User’s Manual • Video Signal Cable • Cable Management Cover • USB Cable (NX/NXM only) •... -
Page 5: Sound Bar Setup
Sound bar Setup To attach the Sound bar to your LCD1770NXM, follow these instructions. Note: this setup is only for the LCD1770NXM. If you have purchase an LCD1770V or LCD1770NX, please move to the next page. 1. Turn off the computer. 2. -
Page 6: Display Setup
15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure 3). Tighten all screws. NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC-Mitsubishi Electronics Display of America, Inc. at (800) 632-4662. 3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position (Figure 4). -
Page 7: Dvi Cable
Display Setup –continued Figure 1 Figure 2 Figure 3 DVI Signal Cable Macintosh Cable Adapter (not included) (not included) Note: Some Macintosh systems do not require a (NX and NXM only) Macintosh Cable Adapter 30˚ Tilt Figure 4 Figure 5 Highest Stand Position... - Page 8 Display Setup –continued Figure 7 USB Cable D-Sub Cable (NX and NMX only) Flat Figure 8 Figure 9 Insert Top First Then Bottom Figure 10 OFF Position Vacation Switch ON Position Power Button LCD17PISAManual080604.p65 8/6/04, 5:14 PM...
- Page 9 Display Setup –continued Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and...
-
Page 10: Mounting
Mounting Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure M.1). 2. Disconnect all cables. 3. -
Page 11: Flexible Arm Installation
Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1). -
Page 12: Controls
Controls (On-Screen Manager) control buttons on the front of the monitor function ® as follows: To access OSM menu, press any of the control buttons ( Left, Right, Down, Up). MENU/EXIT, To change signal input, press the SELECT button (NX and NXM only) . NOTE: OSM must be closed in order to change signal input. -
Page 13: Menu Tools
Controls –continued NATIVE: Original color presented by the LCD panel that is unadjustable. sRGB: sRGB mode dramatically improves the color fidelity in the desktop environment by a single standard RGB color space. With this color supported environment, the operator could easily and confidently communicate color without further color management overhead in the most common situations. -
Page 14: Recommended Use
As with all personal display devices, NEC-Mitsubishi Electronics Display recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. - Page 15 Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
-
Page 16: Specifications
1024 x 768* @ 60 Hz to 75 Hz 1152 x 870* @ 75 Hz 1280 x 1024 @ 60 Hz to 75 Hz ......NEC-Mitsubishi Electronics Display cites recommended resolution at 60 Hz for optimal display performance. Active Display Area Horizontal : 337.9 mm/13.3 inches... - Page 17 @ 60 Hz to 75 Hz 1152 x 870* @ 75 Hz 1280 x 1024 @ 60 Hz to 75 Hz (Analog) ..NEC-Mitsubishi Electronics Display cites 1280 x 1024 @ 60 Hz (Digital) recommended resolution at 60 Hz for optimal display performance.
- Page 18 @ 60 Hz to 75 Hz 1152 x 870* @ 75 Hz 1280 x 1024 @ 60 Hz to 75 Hz (Analog) ..NEC-Mitsubishi Electronics Display cites 1280 x 1024 @ 60 Hz (Digital) recommended resolution at 60 Hz for optimal display performance.
-
Page 19: Features
Features Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-clear text deliver a comfortable viewing experience. No Touch Auto Adjust™ automatically adjusts your optimal image settings upon initial power-on. -
Page 20: Troubleshooting
For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. -
Page 21: References
References NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Warranty Information: www.necmitsubishi.com/warranty Online Technical Support www.necmitsubishi.com/support Sales and Product Information Sales Information Line: (888) NEC-MITS [888-632-6487]... -
Page 22: Limited Warranty
Product may vary. Therefore, suitability of a Product for a specific purpose or application must be determined by consumer and is not warranted by NMD-A. For the name of your nearest authorized NEC-Mitsubishi Electronics Display service facility, contact NEC-Mitsubishi Electronics Display of America at 1-800-632-4662. LCD17PISAManual080604.p65... -
Page 23: Tco'99
TCO’99 MultiSync LCD1770V, LCD1770V-BK, LCD1770NX-BK and LCD1770NXM-BK Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. - Page 24 TCO’99 –continued related to another group of environmental toxins, PCBs, which are suspected to give rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio- accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in fetus development may occur.
-
Page 25: Tco'03
TCO’03 -MultiSync LCD1770NX and LCD1770NXM White Models Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. -
Page 26: Manufacturer's Recycling And Energy Information
Manufacturer’s Recycling and Energy Information NEC-Mitsubishi Electric Visual Systems Corp. is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-... - Page 27 Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Corporation 4-13-23, Shibaura, Minato-Ku Tokyo 108-0023, Japan LCD17PISAManual080604.p65 8/6/04, 5:15 PM...
-
Page 28: Avertissement
NEC LCD Series PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC- Mitsubishi Electronics Display of America and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others.