Table of Contents
Advertisement
inch FHD
21.5
Description
Important Safety Notice--------------------------------------2
Technical Data--------------------------------------------- -3~5
Installation-------------------------------------------------------6
Troubleshooting---------------------------------------------7~8
On Screen Display-----------------------------------------9~10
Lock/unlock, Aging,Factory mode-------------------------11
Mechanical Instructions ------------------------------13~15
Color adjustment --------------------------------------------16
F AQs (Frequently Asked Questions)---------------17~18
Electrical instruction ----------------------------------19~20
Service Tool-----------------------------------------------21~22
DDC Instructions & Serial Number -----------------23~29
DDC DATA -----------------------------------------------30~31
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOL TAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.
Published by Philips Consumer Lifestyle Copyright reserved Subject to modification
TFT
LCD Colour Monitor
228C3LHSB/00
228C3LHSB/01
228C3LHSB/00(AP)
228C3LHSB/75
228C3LHSB/93
228C3LHSB/96
228C3LHSB/27
228C3LHSB/69
TABLE OF CONTENTS
Page
---------------------------------12
------------------------32~33
SAFETY
REFER TO BACK COVER FOR IMPOR T ANT SAFETY GUIDELINES
Chassis:
Description
-
-----------------------------------34
Wiring Diagram----------------------------------------------35
Block Diagram------------------------------------------------36
Scaler Diagram & C.B.A. ------------------------------37~43
LED Driver
Diagram & C.B.A. -------------------------44~46
Control Diagram & C.B.A. -----------------------------47~48
General product specification------------------------51~68
Exploded V iew -----------------------------------------------69
Spare/
Recommended P
arts List-------------------------70
PCBA photos---------------------------------------------------71
Repair tips-------------------------------------------------72~73
Repair Flow chart----------------------------------------74~75
Safety Test Requirments------------------------------------76
BZL&CTRL BD Replace ---------------------------------------77
Auto Color & User reset --------------------------------78~79
NOTICE
JJun 04 2011
MERIDIAN 3
Horizontal frequencies
30 - 8 3 kHz
Page
GB
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Philips 228C3LHSB
Summary of Contents for Philips 228C3LHSB
-
Page 1: Table Of Contents
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOL TAGES. CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING. REFER TO BACK COVER FOR IMPOR T ANT SAFETY GUIDELINES Published by Philips Consumer Lifestyle Copyright reserved Subject to modification JJun 04 2011... -
Page 2: Important Safety Notice
SERVICE MANUAL. recommended by Philips must f irst sati sfy himself thoroughly that neither his safety nor the saf e operation of the equipment will be jeopardized by the service method sel ected. -
Page 3: Technical Data
228C3LH LCD Technical Data Type NR. : AUO M215HW01 VB Resolution : 1920 x 1080 (FHD) Outside dimensions : 495.6(H) x 292.2(V) x 10.3(D) mm PIN No. SIGNAL PIN No. SIGNAL Pitch (mm) : 0.24825mm x 0.24825mm DDC +3.3V or +5V : 1920 horiz. - Page 4 228C3LH LCD Technical Data QISDA Type NR. : BMS M215Q01 V0 Resolution : 1920 x 1080 (FHD) Outside dimensions : 495.6(H) x 292.2(V) x 8.3 (D) mm PIN No. SIGNAL PIN No. SIGNAL Pitch (mm) : 0.24825mm x 0.24825mm DDC +3.3V or +5V : 1920 horiz.
- Page 5 228C3LH LCD Technical Data Type NR. : CPT CLAA215FA04 V4 Resolution : 1920 x 1080 (FHD) Outside dimensions : 495.6(H) x 292.2(V) x 9.85 (D) mm PIN No. SIGNAL PIN No. SIGNAL Pitch (mm) : 0.271mm x 0.271mm DDC +3.3V or +5V : 1920 horiz.
-
Page 6: Installation
228C3LH LCD Installation Front View Product Description Accessory Pack Unpack all the parts Connecting to Your PC 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. Rear View... -
Page 7: Troubleshooting
228C3LH LCD Troubleshooting... -
Page 8: Troubleshooting
228C3LH LCD Troubleshooting... -
Page 9: On Screen Display
What is the On-Screen Display? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below : Basic and simple instruction on the control keys. - Page 10 228C3LH LCD On-Screen Display The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
- Page 11 228C3LH LCD To lock/unlock OSD FUNCTION(User Mode) The OSD function can be locked by pressing"OK"button(1) for more than 10 Step 1 : Access Factory Mode then enter Factory Menu. seconds, the screen shows following windows for 4 seconds. Every time Step 2 : By pressing "...
-
Page 12: Philips Pixel Defect Policy
Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have Pixels and Sub pixels pixel or sub pixel defects exceeding the tolerances listed in the following A pixel, or picture element, is composed of three sub pixels in the primary tables. -
Page 13: Mechanical Instructions
228C3LH LCD Mechanical Instruction Preparation before disassemble 1.Clean the room for disassemble 2.Identify the area for monitor 3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for material flow; according to the actual condition plan the disassemble layout 4.Prepare the implement, equipments, materials as bellow: 1) Press-fixture 2) working table... -
Page 14: Mechanical Instruction
228C3LH LCD Mechanical Instruction Disassemble the RC to Glove the BZL Unlock 6 screws Glove Disassemble the hinge and RC Disassemble the wire from Glove panel and PCBA Disassemble the C/B Glove cable from PCBA Disassemble the C/B LED board... -
Page 15: Mechanical Instructions
228C3LH LCD Mechanical Instruction Disassemble the LVDS Glove cable and AL tape from panel and BKT Unlock 6 screws Screw-driver Glove PCBA screw: 7+1Kg Disassemble the LED Glove board and driver board... -
Page 16: Color Adjustment
There are six factory preset white color 11500K, 9300K, 8200K, 7500K, 6500K, sRGB, 5000K Fig. 1 Fig.2 Align by Philips PerfecTune (also called FGA) function. Apply full white pattern, with brightness in 100 % position and the contrast 4. Access Factory Mode control at 50 % position. -
Page 17: Faqs (Frequently Asked Questions)
228C3LH LCD FAQs (Frequently Asked Questions) -
Page 18: F Aqs (Frequently Asked Questions)
228C3LH LCD FAQs (Frequently Asked Questions) -
Page 19: Electrical Instruction
228C3LH LCD Electrical Instructions Electrical characteristics 1. Interface signals 1.1 D-Sub Analog Input signal: Video, Hsync., Vsync Video: 0.7 Vp-p, input impedance, 75 ohm @DC Sync.: Separate sync TTL level , input impedance 2.2k ohm terminate Hsync Positive/Negative Vsync Positive/Negative Composite sync TTL level, input impedance 2.2k ohm terminate Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive) 1.2 DVI-D Digital... -
Page 20: Electrical Instruction
228C3LH LCD Electrical Instructions White color adjustment There are three factory preset white color 9300K, 6500K, sRGB. Apply full gray64 pattern, with brightness in 100 % position and the contrast control at 50 % position.The 1931 CIE Chromaticity (color triangle) diagram (x ,y) coordinate for the screencenter should be: Product specification CIE coordinates (x,y) -
Page 21: Service Tool
228C3LH LCD Service tool-Hardware PCM code 12NC 5E.L8215.001 996510019769... - Page 22 228C3LH LCD Service tool-Software FW writing tool: Easy Writer V4.54 DDC writing tool: Q-EDID-V30...
- Page 23 228C3LH LCD DDC Instructions DDC Data Re-programming In case the DDC data memory IC or main EEPROM which storage all factory settings were replaced due to a defect, the serial numbers have to be re-programmed "Analog DDC IC, Digital DDC IC & EEPROM". It is advised to re-soldered DDC IC and main EEPROM from the old board onto the new board if circuit board have been replaced, in this case the DDC data does not need to be re-programmed.
- Page 24 228C3LH LCD DDC Instructions 5. Connect and Mains cord to Monitor as shown in Fig.2. Fig.2 Pin assignments : A. 15-pin D-Sub Connector PIN No. SIGNAL PIN No. SIGNAL DDC +3.3V or +5V Green/ SOG Logic GND Blue Sense (GND) Sense (GND) Bi-directional data Cable Detect (GND)
- Page 25 228C3LH LCD DDC Instructions 6. Setup the Philips-IMS EDID Tools program Step 1: Open Q-EDID V030 Software into your folder as shown in Fig.3. and Fig.4. Fig.3 Fig.4...
- Page 26 228C3LH LCD DDC Instructions Step 2: Press “Open File” then choose 228C3LH DDC FILE Fig.5...
- Page 27 228C3LH LCD DDC Instructions Step 3 : Load DDC file success as shown in Fig. 6 . Fig.Step 4 : update Serial number and press enter to correct S/N number shown as Fig.7 . Fig.7...
- Page 28 228C3LH LCD DDC Instructions Step 5 : Press “RUN” to write EDID and serial number shown as Fig.8 . Fig.8 Step 6 : EDID and serial number update success shown as Fig.9 Fig.9...
- Page 29 228C3LH LCD DDC Instructions 8. Press “Read EDID” to read EDID and serial number shown as Fig.10 . and check Serial number is the same as we set. Note: If not the same, please rewrite EDID S/N again. Fig.10 Serial Number Definition...
-
Page 30: Ddc Data
228C3LH LCD DDC DATA Analog DDC 128 bytes EDID Data (Hex): Monitor #1 [Real-time 0x0021] Model name....248CLH BUS_SLOT = Manufacturer..... Philips PCI00000.PCI00004.PCI00008.PCI0000C.PCI00010.PCI Plug and Play ID..PHLC088 00014.PCI00018.PCI0001C Serial number.... DL51114514635 00000000 = Manufacture date..2011, ISO week 14 06911106.22100006.060000C4.00000800.E0000008.000... -
Page 31: Ddc Data
103E9600.09252100.00180000.00000000.00000000.000 PCI00000.PCI00004.PCI00008.PCI0000C.PCI00010.PCI 00000.00000000.00000029 00014.PCI00018.PCI0001C 00000000 = Monitor #1 [Real-time 0x0011] 06911106.22100006.060000C4.00000800.E0000008.000 Model name....248CLH 00000.00000000.00000000 Manufacturer..... Philips 00000008 = Plug and Play ID..PHLC088 85981106.22300007.06040000.00010000.00000000.0000 Serial number.... DL51114514635 0000.00010100.00008080 Manufacture date..2011, ISO week 14 00000038 = EDID revision.... 1.3 06861106.02100087.06010040.00800000.00000000.0000... -
Page 32: Firmware Upgrade For Cpu
228C3LH LCD Firmware Upgrade for CPU Step 1: Install Port95nt.exe. Re-star computer Step 2: Double click NOVATEK Tool Option: 1. Choose “MYSON” 2. IIC Speed: 1000 3. Press confirm change Step 3: Press Load File and choose *.hex... -
Page 33: Firmware Upgrade For Cpu
228C3LH LCD Firmware Upgrade for CPU Step 4: Press “Auto” to upgrade FW Step 5: Upgrade OK... -
Page 34: Failure Mode Of Panel
228C3LH LCD Failure Mode Of Panel Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel. - Page 43 228C3LH LCD S c alar Diagram & C .B .A...
-
Page 45: Led Diagram & C.b
228C3LH LCD LED Driver Diagram & C.B .A... -
Page 46: Led Driver Diagram & C.b.a
228C3LH LCD LED Driver Diagram & C.B .A... - Page 47 White 2KV White 2KV White 2KV White 2KV White 2KV White 2KV White 2KV White 2KV...
-
Page 48: Control Diagram & C.b.a
228C3LH LCD C ontrol Diagram & C .B .A. - Page 49 White 2KV White 2KV White 2KV White 2KV...
-
Page 50: Led Diagram & C.b.a
228C3LH LCD LED Diagram & C.B .A... -
Page 51: General Product Specification
Issued by: Argent Chan/HH Chi Revision History Ver. Date (yy.mm.dd) Author Brief Description 2011.01.13 UC Hsu Initial version Blue: Changes than last version Red: TBD 228C3 Series Quick Specification table: 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 1 of 18... - Page 52 3.16 OWER ENSOR OPTION REFER TO UICK SPECIFICATION TABLE NOT REQUIRE IN 228C3L(H)) ......................... 12 3.17 228C3L(H))..........12 MART OWER OPTION NOT REQUIRE IN 3.18 ....................... 12 MART ESPONSE 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 2 of 18...
- Page 53 ENVIRONMENTAL CHARACTERISTICS ..............18 ..........18 USCEPTIBILITY OF DISPLAY TO EXTERNAL ENVIRONMENT ..................... 18 RANSPORTATION TESTS ..........18 ISPLAY DISTURBANCES FROM EXTERNAL ENVIRONMENT ........... 18 ISPLAY DISTURBANCES TO EXTERNAL ENVIRONMENT 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 3 of 18...
-
Page 54: Foreword
1920x1080 5 Horizontal Frequency Range 30~83 KHz 6 Vertical Frequency Range 56~76Hz 7 Monitor Name (13 characters max.) Philips 228C3LH 228C3L Philips 228C3L (21.5inch Wide LCD MONITOR 1 User visible strings on .inf file 228C3L) 2 Manufacturer ID ( EDID data) 3 Product ID, "xxxx"... -
Page 55: Scanning Frequencies
Analog : Support RGB WUXGA 1920x1200@60, 2048x1152@60hz input for NT68777UMFG 205Mhz HPLL With 64 steps phase Adjust for RGB Channel in NT68777UMFG Digital : Integrated Single Link TMDS Receiver up To 225MHz deep color mode 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 5 of 18... -
Page 56: Ambient Temperature
Scaler should be capable of below items. 1) Scaler must support color engine for Image enhancement feature (SmartImage) 2) Scaler must have enough memory to support PerfecTune feature and Philips OSD 3) Scaler must support SmartContras, 50M:1 SCR preferred 4) VGA signal Auto adjustment: Monitor automatically adjusts and optimizes resolution and frequency based on input signal defined by “Source”... -
Page 57: Interface
The input signals are applied to the display through DVI-D cable. Length : Please refer to cable bundle summary file Connector type : DVI-D male with DDC-2B pin assignments White connector thumb-operated jackscrews With transplant pin protective cover. 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 7 of 18... - Page 58 No Connect No Connect +5V Power Ground (for +5V) Hot plug detect T.M.D.S. data0- T.M.D.S. data0+ T.M.D.S. data0 shield No Connect No Connect T.M.D.S clock shield T.M.D.S. clock+ T.M.D.S. clock- 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 8 of 18...
-
Page 59: Timing Requirement
Factory preset modes : Refer to Timing table preset modes : Refer to Timing table User modes : Refer to Timing table Timing pixel clock over H/W limitation do not support. 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 9 of 18... -
Page 60: Osd/Keypad Functions
OSD Translation 8 LANGUAGES, w/o Turkish. Power On logo Power On Logo: Power On Show up Philips logo 3 seconds Change to input signal. This picture is reference only. The official drawing will send out by PM. -
Page 61: Horizontal Scanning
3.11 DDC /CI Support and Smart Manage/Control In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with , Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least. 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 11 of 18... -
Page 62: Pivot Function (Option , Refer To Quick Specification Table)
(1) Input signal : As defined in 3.3, 1920 x 1080 non-interlaced mode (1920 x 1080@60 Hz), signal sources must have 75 ohm output impedance. 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 12 of 18... -
Page 63: Brightness
= 0.329 ± 0.02 sRGB x = 0.313 ± 0.02 PerfecTune II y = 0.329 ± 0.02 5000K x = 0.345 ± 0.02 PerfecTune II y = 0.357 ± 0.02 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 13 of 18... - Page 64 = 0.283 ± 0.015 y = 0.297 ± 0.015 6500K/sRGB x = 0.313 ± 0.015 y = 0.329 ± 0.015 sRGB x = 0.313 ± 0.015 y = 0.329 ± 0.015 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 14 of 18...
-
Page 65: Mechanical Characteristics
Mechanical characteristics Cosmetic - Philips ID Mechanical data files - ProE files required Location of Philips logo - Per Philips make-up sheet Gap between panel and front bezel < 1.2mm (Typ.) Location of Control icons - Per Philips Graphic sheet... -
Page 66: Plastics Flammability
Portrait Display : nil 5.14 Kensington Lock Must meet Kensington_slot.spec “TYE-M0004”. MMD request metal plate in Kensington hole. 5.15 Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 ) 5.16 Transportation Transportation standards refer to UAN-D1534/00/01/02. 5.16.1 Transportation packages Net weight Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment from the supplier to the destination specified in the purchase order. -
Page 67: Pallet / Container Loading (Refer To Philips Approved Sht 560)
3. Cold Drop test (for design reference) Un-package test 1. Sine vibration (operating) 2. Half sine shock test (non operation) 5.17 Pallet / Container loading (Refer to Philips approved SHT 560) Transportation standards refer to TYE-M0002 ,UAN-D1534 and UAW-0309. Air shipment - Sea container 20'(pallet/slip sheet) -
Page 68: Environmental Characteristics
Note: recommend at 5 to 35 C, Humidity less than 60 % Transportation tests Refer to 5.15.2 Display disturbances from external environment According to IEC 801-2 for ESD disturbances Display disturbances to external environment 228C3 21.5” Wide 16:9 LCD Monitor 2011/05/23 PHILIPS 18 of 18... - Page 69 228C3LH LCD 228C 3L H (1A 2H ):...
-
Page 70: Spare/ Recommended P Arts List
AH1 PH1 QH1 AHM PHM QHM AH5 PH5 QH5 AH9 PH9 QH9 AH6 PH6 QH6 AH7 PH7 QH7 AH3 PH3 QH3 AH4 PH4 QH4 location Description PCM code Philips 12NC AUO CPT QIS AUO CPT QIS AUO CPT QIS AUO CPT QIS AUO CPT QIS AUO CPT QIS AUO CPT QIS AUO CPT QIS MAIN (I/F) BOARD ASS'Y 5E.1J401.001 5E.1J433.001 LED DRIVER BD ASS'Y 5E.1J433.002... -
Page 71: Pcba Photos
228C3LH LCD Panel & PCBA photos ITEM PCM Description LCDM21.5W M215HW01 VB 5F.LUAV0.091 Z/G (AUO) LCD21.5W CLAA215FA04 5F.LTAPP.021 V4 P (CPT) ASSY LCDM21.5W 6P.QUAV0.001 M215Q01 V0 Z (QISDA) 5E.1J401.001 MAIN (I/F) BOARD ASS'Y 5E.1J433.001 LED DRIVER BD ASS'Y 5E.1J433.002 LED DRIVER BD ASS'Y ASSY CTRL BD 5E.1J403.001 (under BZL assy_FRONT... - Page 72 228C3LH LCD 1.4 Attachment of SMDs 0. Warning - Locate the SMD on the solder lands by means of tweezers and solder the component on one side. Ensure that the component is positioned All ICs and many other semi -conductors are susceptible to correctly on the solder lands (see Fig.2A).
- Page 73 IC data sheet. So as not to damage neighbouring components, it may be necessary to reduce some temperatures and times. More Information For more information on how to handle BGA devices, visit this URL: http://www.atyourservice.ce.philips.com (needs subscription). After login, select Magazine, then go to Workshop Information. Here you will find Information on how to deal with BGA-ICs.
-
Page 74: Repair Flow Chart
228C3LH LCD Repair Flow Chart Bad Power Board Power Board Check Scaler Board Bad Scaler Board... -
Page 75: Repair Flow Chart
228C3LH LCD Repair Flow Chart Check Power Board Check LCD Panel Control Board Board... -
Page 76: Safety Test Requirements
228C3LH LCD Safety Test Requirements 3. Equipments and Connection All units that are returned for service or repair must 3.1. Equipments pass the original manufactures safety tests. Safety For example : testing requires both Hipot and Ground Continuity - Zentech 9032 PROGRAMMABLE AUT O SAFETY testing. - Page 77 228C3LH LCD Philips Monitor Bezel and CTRL BD replace SOP For “touch key function” models, we would add Mylar with glue between Bezel and CTRL BD in order to make the touch function more sensitive. But due to the Bezel and CTRL BD are hard to separate, we suggest that for service repair please replace the whole module.
- Page 78 228C3LH LCD Philips M3/M4 Series Auto Color SOP Step 1: Setup input timing (1280*1024@75Hz) and enter factory mode (press “Menu” & “Down” & “Power” buttons at the same time to turn on monitor). Step 2: Move cursor into “Burn-in Mode” and select “Yes” to enable burn-in mode.
- Page 79 228C3LH LCD Philips M3/M4 Series User reset SOP Step 1: Turn on Monitor and Press “Menu” button to enter into user mode Choose “Setup” ->”Reset” ->”Yes”. Step 2: Run “Auto Adjustment”...