English BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF836, DCF886 Congratulations! An estimation of the level of exposure to vibration should also take into account You have chosen a D WALT tool. Years of the times when the tool is switched off or...
10.8/14.4/18 Li-Ion Approx. charging time 40 (1.3 Ah) 45 (1.5 Ah) 60 (2.0 Ah) BRUSHLESS CORDLESS COMPACT IMPACT DRIVER of battery packs DCF836, DCF886 90 (3.0 Ah) 120 (4.0 Ah) 150 (5.0 Ah) WALT declares that these products described Weight 0.36...
Page 7
English Do not operate power tools in explosive Prevent unintentional starting. Ensure atmospheres, such as in the presence of the switch is in the off position before flammable liquids, gases or dust. Power connecting to power source and/or battery pack, picking up or carrying the tools create sparks which may ignite the dust tool.
English Residual Risks Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp In spite of the application of the relevant safety cutting edges are less likely to bind and are regulations and the implementation of safety easier to control. devices, certain residual risks cannot be avoided.
English NOTICE: Under certain conditions, the manufacturer, its service agent or similar with the charger plugged into the power qualified person to prevent any hazard. supply, the exposed charging contacts • Disconnect the charger from the outlet inside the charger can be shorted by before attempting any cleaning.
English • Do not charge or use battery in explosive Charge indicators: DCB107, DCB112, DCB113, DCB115 atmospheres, such as in the presence of charging flammable liquids, gases or dust. Inserting or removing the battery from the charger may fully charged ignite the dust or fumes.
Have defective cords replaced activities comply with the applicable regulations. immediately. Battery Pack Charge only between 4 ˚C and 40 ˚C. BATTERY TYPE The DCF836 operates on 14.4 volt battery packs. Only for indoor use. The DCF886 operates on 18 volt battery packs.
English INTENDED USE Discard the battery pack with due care These impact drivers are designed for professional for the environment. impact screwdriving applications. The impact function makes this tool particularly useful for driving Charge D WALT battery packs only with fasteners in wood, metal and concrete.
English Belt Hook and Bit Clip (Fig. 1) (see Technical Data). The minimum conductor size is 1 mm ; the maximum length is 30 m. WARNING: To reduce the risk of When using a cable reel, always unwind the cable serious personal injury, DO NOT completely.
Page 14
It may damage the switch and should be avoided. Cat # Ft.-Lbs. In.-Lbs. Forward/Reverse Control Button DCF836 1400 (Fig. 1) DCF886 1500 CAUTION: Ensure fastener and/or A forward/reverse control button (B) determines the system will withstand the level of torque direction of the tool and also serves as a lock-off generated by the tool.
English WARNING: To reduce the risk WARNING: To reduce the risk of injury, only use D WALT impact-ready of serious personal injury, place accessories. the forward/reverse button in the lock-off position or turn tool WARNING: Use only impact off and disconnect battery pack accessories.
Page 18
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...