Table of Contents
Advertisement
Connections
When the unit is turned on after connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically.
Basic Connections
The following connections are required to record the
video cassette and play back the video cassette/discs
through the TV.
≥Refer to the TV's operating instructions.
≥Turn the TV off and disconnect its AC mains lead.
ª For NV-VP32GC
2 AC mains leads are supplied for this unit. Use one of
the supplied AC mains leads of which the plug fits into
your outlet. 3 pin mains plug is for Saudi Arabia.
For better video from DVD
Y
P
B
COMPONENT
VIDEO IN
Television
COMPONENT VIDEO terminal (progressive out)
These terminals can be used for either interlace or progressive
output and provide a clearer picture than the S VIDEO terminal.
Connection using these terminals outputs the colour difference
signals (P
/P
) and luminance signal (Y) separately in order to
B
R
achieve high fidelity in reproducing colours.
≥The description of the component video input terminals depends
on the TV or monitor (e.g. Y/P
to terminals of the same colour.
¬ To enjoy progressive video (l 13)
≥These connections are for the DVD section only.
Carry out the Basic Connections described above to view video from the
VHS section.
≥When making this connection, ensure that you connect the audio cables
(not supplied) to the corresponding audio input terminals on the TV.
≥You may need to change the video-input mode on the TV to view video from
the VHS and DVD sections. Read your TV's operating instructions for
details.
8
Audio/Video Output Sockets
≥Set the RF output channel of the unit to "ss" (RF
OFF) (l 11).
≥Connect audio/video cables directly to your TV. The
video signals on DVDs and video tapes have
copyright protection. The video may not be shown
correctly if you connect through an A/V selector or
other equipment.
~
AC IN
DIGITAL AUDIO
(PCM/BITSTREAM)
DVD OUT
OPTICAL
P
R
(Not supplied)
Video cable
/P
, Y/B-Y/R-Y, Y/C
B
R
To mains supply
~
COMPONENT VIDEO
AC IN
(NTSC 480P/480I PAL 576I)
P
P
Y
R
B
DIGITAL AUDIO
(PCM/BITSTREAM)
DVD OUT
OPTICAL
R-AUDIO-L
VIDEO
COMPONENT VIDEO
(NTSC: 480P/480I PAL: 576I)
P
P
Y
B
R
R-AUDIO-L
VIDEO
S VIDEO
S-Video cable
S VIDEO terminal
The S VIDEO terminal achieves a more vivid
picture than the VIDEO OUT terminal by
separating the chrominance (C) and luminance
(Y) signals (Actual results depend on the TV).
≥Connect to a different terminal group (e.g.
"VIDEO 2") than that you used for the
/C
). Connect
connection through this unit's VHS/DVD OUT
B
R
terminal. Picture from the VHS section will not
appear when you use the same group input
terminal connections because the S Video
terminal input takes precedence.
R-AUDIO-L
TV Set (Not supplied)
Aerial
(Not supplied)
Aerial Connector
IN
R-AUDIO-L
VIDEO
AV1 IN
OUT
VHS/DVD
OUT
RF
S VIDEO
R-AUDIO-L
VIDEO
AUDIO
VIDEO
IN
L
R
Audio/video cable
Television
(Supplied)
R-AUDIO-L
VIDEO
AV1 IN
VHS/DVD
OUT
R-AUDIO-L
VIDEO
(Not supplied)
S VIDEO
IN
Television
Audio cable
Television
(Not supplied)
VIDEO OUT
(480P/480I)
L
VIDEO
S VIDEO
AUDIO IN
IN
R
- Quick Links:
- Recording from DVD to Vhs
- Specifications
Hide quick links:
Advertisement
Table of Contents
