6. Remove the Security Lock.
Remove the screw.
7. Remove the screws (9)*
*
Only for FZ-Y1CH/FZ-Y1CG series.
3
The FZ-Y1CA series has 10 screws. Be sure to
remove the screw at (A).
8. Lift the upper-right side of the cover slightly, and release
the bottom tabs (B). Then, open the cover from the right
side.
●
The left side of the cover is connected to the computer
with the cord. Do not pull the cord.
9. Disconnect the connector (C).
Insulate the connectors on the built-in battery by covering
them with plastic tape, for example.
10. Remove the screws (4) that secures the built-in battery (D),
and remove the built-in battery.
Lift up the Security Lock
cover, and remove it.
.
3
Remove the screws (2),
and remove the slot.
A
C
D
B
15