hit counter code
Panasonic HDC-SDT750PP Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Camcorder
  5. HDC-SDT750PP
  6. Service manual
Panasonic HDC-SDT750PP Service Manual

Panasonic HDC-SDT750PP Service Manual

Hide thumbs Also See for HDC-SDT750PP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Workshop Manual
4
High Definition Video Camera
HDC-SDT750PP
Model No.
HDC-SDT750EB
HDC-SDT750EE
HDC-SDT750EF
HDC-SDT750EG
HDC-SDT750EP
HDC-SDT750GC
HDC-TMT750GC
HDC-TMT750GD
HDC-TMT750GK
HDC-TMT750GT
Vol. 1
Colour
(H)...........Gray Type
© Panasonic Corporation 2010 Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO. VM1009043CE
B27

Advertisement

Table of Contents
loading

Related Manuals for Panasonic HDC-SDT750PP

Summary of Contents for Panasonic HDC-SDT750PP

  • Page 1 ORDER NO. VM1009043CE High Definition Video Camera HDC-SDT750PP Model No. HDC-SDT750EB HDC-SDT750EE HDC-SDT750EF HDC-SDT750EG HDC-SDT750EP HDC-SDT750GC HDC-TMT750GC HDC-TMT750GD HDC-TMT750GK HDC-TMT750GT Vol. 1 Colour (H)...Gray Type © Panasonic Corporation 2010 Unauthorized copy- ing and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Flash P.C.B.----------------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------5 2.2.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure 1.) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check.

  • Page 4: How To Discharge The Capacitor On Flash P.c

    1.4. How to Discharge the Capacitor on Flash P.C.B. CAUTION: 1. Be sure to discharge the capacitor on FLASH P.C.B.. 2. Be careful of the high voltage circuit on FLASH P.C.B. when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and Remove the necessary parts/unit. 2.

  • Page 5: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...

  • Page 6: Caution For Ac Cord (For Eb

    2.3.2.3. How to Replace the Fuse A replacement fuse cover can be purchased from your local Panasonic Dealer. 1. Remove the Fuse Cover with a screwdriver. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.

  • Page 7: How To Replace The Lithium Battery

    It should be disposed of in waste products destined for burial rather than incineration. NOTE: Above caution is applicable for a battery pack which is for HDC-SDT750/TMT750 series, as well. 1. Battery Pack for this model. 2. Button-type battery for Remote controller (CR2025: Being supplied from Energy Company, Panasonic Corporation).

  • Page 8: Service Navigation

    When a part replacement is required for repairing MAIN P.C.B., replace as an assembled parts. (Main P.C.B.) 2. The following category is /are recycle module part. Please send it/them to Central Repair Center. • MAIN P.C.B. (VEP03J02CN: HDC-SDT750PP) • MAIN P.C.B. (VEP03J02CP: HDC-SDT750EB/EF/EG/EP) •...

  • Page 9: How To Define The Model Suffix (Ntsc Or Pal Model)

    3.4. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of HDC-SDT750/TMT750. • a) HDC-SDT750PP • b) HDC-SDT750EB/EF/EG/EP • c) HDC-SDT750EE • d) HDC-TMT750GT • e) HDC-TMT750GK • f) HDC-TMT750GD • g) HDC-SDT750GC, TMT750GC What is the difference is that the “INITIAL SETTING” data which is stored in Flash ROM mounted on Main P.C.B..

  • Page 10: Formatting

    3.5. Formatting...

  • Page 11: Specifications

    4 Specifications...

  • Page 14: Location Of Controls And Components

    Battery release lever [BATT] Battery holder 10 DC input terminal [DC IN] Always use the supplied AC adaptor or a ● genuine Panasonic AC adaptor. 11 HDMI mini connector [HDMI] 12 USB terminal [ 13 AV multi connector ● Use the AV multi cable (only the supplied cable).
  • Page 15 32 Tripod receptacle Flip the belt. 33 Shoe adaptor mount Adjust the length. 34 Shoe adaptor cover Replace the belt. 35 Shoe adaptor release lever 44 Microphone terminal [MIC] [SHOE ADAPTOR RELEASE] A compatible plug-in powered microphone 36 Photoshot button [ ●...

  • Page 16: Selecting A Mode

    Selecting a mode Using with the remote control Change the mode to recording or playback. Operate the mode dial to change the mode to Select the menu. : [SETUP] [REMOTE CONTROL] [ON] START/ STOP /VOL EXT DISPLAY DATE/TIME Align with the status indicator ●...

  • Page 17: Recording 3D Video

    Recording 3D video When using for the first time, be sure to adjust the 3D Conversion Lens attachment position. Turn off the unit. Change the mode to Attach the 3D Conversion Lens to the unit. Turn on the unit. Turn on with the unit in a horizontal state. The 3D Conversion Lens adjustment mode screen will appear automatically after performing the initial setting.
  • Page 18 (After checking the operation description, touch [NEXT].) To adjust the vertical position, rotate the vertical position adjustment dial so that the black horizontal line at the right of the screen is in the center of the red guidelines Touch [NEXT]. Removing the lens front cap.

  • Page 19: Service Mode

    6 Service Mode 1. Indication method of the service menu Set the mode dial “Motion Picture Recording” mode. 2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but- ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.

  • Page 20: Built-In Memory Self Check Execution (Hdc-Tmt750 Only)

    6.1. Built-in Memory Self Check Execution (HDC-TMT750 only) Touch the [ 3 ] of LCD, select Built-in memory self check execution. Operation specifications Indication contents • Built-in memory self check result display Display the Built-in memory self check execution. Displays other than “OK” are abnormalities of Built-in memory. Push the “Menu”...

  • Page 21: Power On Self Check Result Display

    6.3. Power ON Self Check Result Display Touch the [ 5 ] of LCD, select Power ON self check result display. Operation specifications Indication contents • Power ON self check result display Function to diagnose correct function of the device and interface between devices result display. Display the following commnucation test result.

  • Page 22: Troubleshooting Guide

    7 Troubleshooting Guide...

  • Page 23: Service Fixture & Tools

    8 Service Fixture & Tools 8.1. When Replacing the Main P.C.B. After replacing the MAIN P.C.B., be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in “TSN system”, together with Maintenance software. 8.2.
  • Page 24 CAUTION-1. (When servicing FLASH P.C.B.) 1. Be sure to discharge the capacitor on FLASH P.C.B.. Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH P.C.B.”. The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed. 2.

  • Page 25: Disassembly And Assembly Instructions

    9 Disassembly and Assembly Instructions 9.1. Disassembly Flow Chart for the Unit This is a disassembling chart. When assembling, perform this chart conversely. 9.2. PCB Location...

  • Page 26: Disassembly Procedure For The Unit

    9.3. Disassembly Procedure for the Item Removal Side (R) OP P.C.B. Fig. D15 2 Screws (T) Unit Unit SP Angle Speaker PS6501 (Connector) P6501 (Connector) Item Removal Speaker Side Case (L) Unit Fig. D1 2 Screws (A) Side (R) OP P.C.B. Unit 4 Screws (B) Fig.
  • Page 27 Item Removal Top Frame Fig. D32 4 Screws (d) Fig. D33 1 Locking tab Top Frame Top Operation Unit Fig. D34 4 Screws (e) FP4803 (Flex) 2 Ribs Top Operation Unit MIC AMP P.C.B. Unit Fig. D35 FP4801 (Flex) FP4804 (Flex) 2 Hooks MIC AMP P.C.B.
  • Page 28 9.3.2. Removal of the ESD P.C.B. Unit Fig. D3 Fig. D2...
  • Page 29 9.3.3. Removal of the Cover Board Unit 9.3.4. Removal of the Top Case Unit Fig. D4 Fig. D5...
  • Page 30 9.3.5. Removal of the Front Unit Fig. D6 Fig. D7...
  • Page 31 9.3.6. Removal of the Side Case (R) Unit 9.3.7. Removal of the Batt Case Unit Fig. D9 9.3.8. Removal of the Lens Unit Fig. D8 Fig. D10...
  • Page 32 Fig. D13 9.3.10. Removal of the Flash P.C.B. Unit Fig. D11 9.3.9. Removal of the Main P.C.B. Unit Fig. D14 Fig. D12...
  • Page 33 9.3.11. Removal of the Side (R) OP P.C.B. Unit and Speaker Fig. D16 9.3.12. Removal of the Fan Motor Fig. D15 Fig. D17...
  • Page 34 9.3.13. Removal of the LCD Case Unit 9.3.14. Removal of the LCD Hinge Unit Fig. D19 Fig. D18...
  • Page 35 9.3.15. Removal of the Monitor P.C.B. Unit Fig. D21 Fig. D20...
  • Page 36 9.3.16. Removal of the Front P.C.B. Unit Fig. D23 9.3.17. Removal of the Barrier Motor Unit Fig. D24 Fig. D22...
  • Page 37 Fig. D25 9.3.18. Removal of the Front Case Unit Fig. D27 Fig. D26...
  • Page 38 9.3.19. Removal of the MF SENS P.C.B. Unit, MF Holl FPC, Front Case, MF Front Frame and MF Sheet Fig. D28 Fig. D29...
  • Page 39 9.3.20. Removal of the EVF Unit Fig. D31 9.3.21. Removal of the Top Frame Fig. D30 Fig. D32...
  • Page 40 9.3.23. Removal of the MIC AMP P.C.B. Unit Fig. D33 9.3.22. Removal of the Top Operation Unit Fig. D35 9.3.24. Removal of the Camera Operation Unit Fig. D36 Fig. D34...
  • Page 41 9.3.25. Removal of the ECM FPC Unit Fig. D38 9.3.26. Removal of the Batt Catcher P.C.B. Unit Fig. D37 Fig. D39...
  • Page 42 9.3.27. Removal of the MOS Heat Radiation 9.3.29. Removal of the IRIS Unit Plate Fig. D40 9.3.28. Removal of the MOS Unit and Opti- cal Filter Fig. D42 Fig. D41...
  • Page 43 9.3.30. Removal of the Zoom Motor 9.3.31. Removal of the 1st Lens Frame Unit Fig. D44 9.3.32. Removal of the 2nd Lens Frame Move Unit Fig. D45 Fig. D43...
  • Page 44 9.3.33. Removal of the Body Unit and the 9.3.34. Removal of the Master Flange Zoom Guide Pole Cover Fig. D47 9.3.35. Removal of the 4th Lens Frame Move Unit Fig. D46 Fig. D48...
  • Page 45 9.3.36. Removal of the Focus Guide Pole L and Focus Guide Pole S Fig. D50 Fig. D49...

  • Page 46: Disassembly Flow Chart For The 3D Conversion Lens

    9.4. Disassembly Flow Chart for the 9.5.1. Removal of the Bottom Case and Front Case Unit 3D Conversion Lens This is a disassembling chart. When assembling, perform this chart conversely. 9.5. Disassembly Procedure of the 3D Coversion Lens Item Removal Bottom Case Fig.
  • Page 47 9.5.2. Removal of the Adjustment Dial 9.5.3. Removal of the Lens Barrel Unit Cover Fig. L3 Fig. L2...
  • Page 48 9.5.4. Removal of the Fixing Base and Fixing Dial Fig. L5 Fig. L4...
  • Page 49 9.5.5. Removal of the Horizontal Position Adjustment Dial Unit Fig. L6...

  • Page 50: Measurements And Adjustments

    10 Measurements and Adjustments 10.1. Electric Adjustment • Adjustment method is different from a conventional High definition video camera. • An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment. • A USB driver for service is necessary to communication with PC. •...
  • Page 51 Adjustment Items • Adjustment item as follows. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN System".

  • Page 52: Factory Setting

    11 Factory Setting 11.1. How To Turn On The Factory Settings? 1. Set the mode dial “Motion Picture Recording” mode. 2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but- ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.

  • Page 53: What Is The Factory Settings

    11.2. What Is The Factory Settings? The factory settings clean up and/or refresh the following settings. 1. MENU, MODE, ADJUSTMENT VALUE. 2. SD card format. 3. Reset the folder number and file number of still pictures. (Setting the folder number is 100, and file number is 0.) 4.
  • Page 54 3.The voltage being indicated on the schematic diagram is measured in "Standard-Playback" mode when there is no specify mode is mentioned. Model No. HDC-SDT750PP HDC-TMT750GC 4.Although the voltage and waveform available on here is measured with standard frame, it may be differ from actual measurement due to modification of circuit and so on.

  • Page 55: S2. Voltage Chart

    S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.

  • Page 56: S3. Block Diagram

    S3. Block Diagram S3.1. Overall Block Diagram : VIDEO SIGNAL NOTE : AUDIO SIGNAL : CLK or CONTROL LINE LENS(F1.5-2.8 12x) ZOOM/ IC151 CONV. FOCUS IRIS/ MOS IMAGE LENS MOTOR/ SENSOR x 3 IC851 COLOR EVF EVF COLOR PANEL DRIVER IC2801 Analog 3D ADAPTOR...

  • Page 57: S4. Schematic Diagram

    S4. Schematic Diagram S4.1. Interconnection Diagram MIC AMP P.C.B. FLASH (COMPONENT SIDE) : (FOIL SIDE) FP6501 POWER SW E KEYIN3 FP4803 D GND SIDE-R OP FPC D GND FUN FG PW FAN5V SPOUT2 FLASH P.C.B. SPOUT1 FP4804 OPERATION SW VTR KEY 5 MNL SW PS6501 VTR KEY 5...

  • Page 58: S4.2. Flash Schematic Diagram

    S4.2. Flash Schematic Diagram [AV JACK] JK3301 G_VOUT2 K2HZ112E0001 G_VOUT_JK LB3304 J0JCC0000276 R3315 75[D][18] G_VOUT VOUT LB3303 J0JCC0000408 G_HDYOUT_JK R3314 75[D][18] G_HDYOUT HDYOUT G_HDYOUT2 VGND L3351 HDYGND G_LOUT_JK J0JCC0000276 LB3305 G_LOUT LOUT G_PBOUT_JK LB3302 J0JCC0000408 PW_3R2V_GS R3313 75[D][18] G_PBOUT PBOUT G_PBOUT2 LRGND C3352...

  • Page 59: S4.3. Batt_Catcher Schematic Diagram

    S4.3. BATT_Catcher Schematic Diagram TO SIDE_R_OP CL6304 FP6302 K1MY08BA0370 POWER_SW POWER_SW KEYIN3 KEYIN3 D_GND D_GND FAN_FG FAN_FG PW_FAN5V IC6302 PW_FAN5V C0DBGFC00009 TO MAIN C6301 PP601 K1KB50AA0094 GYRO SENSOR 検出軸と実装方向は最終確認すること CL6305 BATT- BATT- BATT+ CL6306 L6305 BATT+ 17 16 $[G1C100MA0410] C6309 BATT+ 1000P BATT+...

  • Page 60: S4.4. Side R Schematic Diagram

    S4.4. Side R Schematic Diagram TO SPEAKER P6501 K1KA02BA0014 SPOUT2 SPOUT1 TO BATT_CATCHER FP6501 K1MN08A00072 TO FAN SPOUT1 PS6501 K1KA03BA0014 SPOUT2 PW_FAN5V PW_FAN5V FAN_FG FUN_FG D_GND D_GND D_GND TOP VIEW E_KEYIN3 POWER_SW S6501 K0F111A00589 6 0 P S6502 K0F111A00589 POWER ON/OFF 1 SP1 8 POWER_SW HDC-TMT750/SDT750...

  • Page 61: S4.5. Monitor Schematic Diagram

    S4.5. Monitor Schematic Diagram TO MAIN TO LCD PANEL FP901 FP904 K1MY16BA0159 K1MY41BA0369 [0.5mm][SHITA] [0.3mm][SHITA][t=0.2mm] CLK18_LCD VGL2 CLK18_LCD PW_REG1R8V PW_REG1R8V PW_REG3V BUS9_LCDYC0 BUS9_LCDYC0 VCC1 BUS9_LCDYC1 C902 C905 BUS9_LCDYC1 $[18] C906 6.3V 10V1[18] BUS9_LCDYC2 BUS9_LCDYC2 VCOMH C903 C907 BUS9_LCDYC3 BUS9_LCDYC3 VCOML 6.3V BUS9_LCDYC4 IOVCC...

  • Page 62: S4.6. Front Schematic Diagram

    S4.6. Front Schematic Diagram [HEADPHONE] HPCOM IR6401 D_GND B3RBB0000013 LB4927 REMOCON HP_DET_L J0JCC0000276 HP_DET_L LB4928 J0JCC0000276 G_HPL ROUT C4921 LB4929 0.01 J0JCC0000276 G_HPR G_EXTMICL ROUT C4922 LB4930 Q4908 G_EXTMICR PD_A HPCOM 0.01 J0JHC0000078 B1ABDF000017 EXTMIC_L PD_C C4923 C6401 VA4902 R4922 10u[28] R4906 R4913...

  • Page 63: S4.7. Mf Sens Schematic Diagram

    S4.7. MF SENS Schematic Diagram / S4.8. MF Hole FPC Schematic Diagram K1MY04BA0385(0.5MM B.F.) K1MY06BA0370(0.5MM B.F.) TO MONITER TO FRONT FTP2801 FTP2802 P2701 TO FRONT SE_GND SE_GND K1MY04BA0385 MFL1 MFL1 MF SENSOR MFL2 MFL2 MFVCC MFVCC 3D_DET_L MFVCC SE_GND MFL2 Q2702 MFL1 B3NBA0000017...

  • Page 64: S4.9. Cam Func Fpc Schematic Diagram

    S4.9. CAM FUNC FPC Schematic Diagram / S4.10. EVF B/L Schematic Diagram TO EVF PANEL C803 TO BATT_CATCHER FP802 10V1[18] [0.3mm] K1MY20BA0370 FP801 K1MN21AA0094 [0.5mm][SHITA] D_GND D_GND VSSG D_GND D_GND HCK2 PW_LCD8R5V HCK1 PW_LCD8R5V PW_LCD8R5V CLK2_EVFCKH2 S6601 CKH2 CLK2_EVFCKH1 K0F111A00589 TO MIC_AMP_PCB FP4804 K1MY04BA0370 CKH1 FT6501...

  • Page 65: S4.11. Mic Amp Schematic Diagram

    S4.11. MIC AMP Schematic Diagram Q4801 B1ABDF000017 R4816 R4817 4700 TO MAIN FP4802 K1MN21AA0035 C4817 F3F0J226A032 IC4801 C0ABBB000369 PW_LIBATT FP4801 TO ECM PW_LIBATT K1MY08BA0370 VTR_KEY_5 VTR_KEY_4 VTR_KEY_1 R4807 PHOTO_SW C4801 R4806 ECM[R] 0.047 MIC_GND C4802 MIC_GND ECM[C] C4803 R4808 G_MIC_OUT_L ECM[F] 0.047 G_MIC_OUT_F...

  • Page 66: S4.12. Mic Amp Fpc Schematic Diagram

    S4.12. MIC AMP FPC Schematic Diagram TO MIC TO MAIN (FP4802) (PS6002) FT6501 PP6003 K1KA20A00275 [0.3mm][UE] [0.5mm][BtoB] ZOOMAD PW_LIBATT AVREF PW_LIBATT DISK_ACCESS_LED VTR_KEY_5 STANDBY_LED VTR_KEY_4 POWER_LED VTR_KEY_1 PW_LIBATT PHOTO_SW L=0.2 VTR_KEY_5 VTR_KEY_4 MIC_GND L=2.6 VTR_KEY_1 MIC_GND PHOTO_SW G_MIC_OUT_L G_MIC_OUT_F S=1.4 MIC_GND G_MIC_OUT_C MIC_GND...

  • Page 67: S5. Print Circuit Board

    S5. Print Circuit Board S5.1. Flash P.C.B. 8 7 6 5 Q7005 C7010 R7015 C3910 C3902 C3905 C3915 R3914 R3913 RX3901 CH3351 9 8 7 6 IC3351 (Component Side) P7001 R7001 D7003 MK3 MK4 C3303 (Foil Side) HDC-TMT750/SDT750 Flash P.C.B. S-14...

  • Page 68: S5.2. Batt_Catcher P.c.b

    S5.2. BATT_Catcher P.C.B. / S5.3. Side R P.C.B. CH853 C6308 C6307 C854 C858 PP601 (Component Side) (Component Side) P S 6 5 0 1 (Foil Side) (Foil Side) HDC-TMT750/SDT750 HDC-TMT750/SDT750 BATT_Catcher P.C.B. Side R P.C.B. S-15...

  • Page 69: S5.4. Monitor P.c.b

    S5.4. Monitor P.C.B. S5.4.1. Monitor P.C.B. (Component Side) (Component Side) HDC-TMT750/SDT750 Monitor P.C.B. (Component Side) S-16...

  • Page 70: S5.4.2. Monitor P.c.b. (Foil Side

    S5.4.2. Monitor P.C.B. (Foil Side) C905 C907 CH904 C908 CH905 C909 CH906 C915 C916 CH907 C911 C917 C913 C504 CH901 C505 CH903 CH902 (Foil Side) HDC-TMT750/SDT750 Monitor P.C.B. (Foil Side) S-17...

  • Page 71: S5.6. Mf Sens P.c.b

    S5.5. Front P.C.B. / S5.6. MF SENS P.C.B. (Component Side) VA6402 CL6408 CL6409 (Component Side) RL4811 (Foil Side) R4908 C4923 R4909 C6402 Q4901 R6403 R4907 LB4927 LB4930 Q6401 R4906 (Foil Side) HDC-TMT750/SDT750 HDC-TMT750/SDT750 Front P.C.B. MF SENS P.C.B. S-18...

  • Page 72: S5.7. Mf Hole Fpc P.c.b

    S5.7. MF Hole FPC P.C.B. / S5.8. CAM FUNC FPC P.C.B FT6501 IC2801 (Foil Side) (Foil Side) HDC-TMT750/SDT750 HDC-TMT750/SDT750 MF Hole FPC P.C.B. CAM FUNC FPC P.C.B. S-19...

  • Page 73: S5.9. Evf B/L P.c.b

    S5.9. EVF B/L P.C.B. / S5.10. MIC AMP P.C.B. D801 R4810 Q801 D802 R4805 C4812 C4811 Q4801 D803 ZB6401 RL4801 C4815 R804 R4818 R803 C4816 C4803 R805 C802 (Component Side) (Component Side) FP801 C 4 8 0 6 MK1 MK2 R 4 8 1 1 R 4 8 0 6 FP802...

  • Page 74: S5.11. Mic Amp Fpc P.c.b

    S5.11. MIC AMP FPC P.C.B. FT6501 PP6003 (Foil Side) HDC-TMT750/SDT750 MIC AMP FPC P.C.B. S-21...
  • Page 75 S-22...

  • Page 76: S6. Replacement Parts List

    S6. Replacement Parts List Note: 1.* Be sure to make your orders of replacement parts according to this list. 2. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. 3.
  • Page 77 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks R3909 ERJ2GEJ102X M.RESISTOR CH 1/16W 1K VEP03J02DN MAIN P.C.B. UNIT 1 (RTL) TMT750GD,GT E.S.D. R3910 ERJ2GEJ271 M.RESISTOR CH 1/10W 270 VEP03J02DQ MAIN P.C.B. UNIT 1 (RTL) TMT750GC,GK E.S.D.
  • Page 78 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks ## VEP26330A MONITOR PCB UNIT (RTL) E.S.D. LB4924 J0JCC0000276 FILTER LB4926 J0JCC0000276 FILTER C502 F1G1C104A077 C.CAPACITOR CH 16V 0.1U LB4927 J0JCC0000276 FILTER C504 F1G1H1020008 C.CAPACITOR CH 50V 1000P LB4928 J0JCC0000276 FILTER...
  • Page 79 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks R4813 ERJ2GEJ683 M.RESISTOR CH 1/16W 68K ## VEP20C85A CAM FUNC PCB UNIT R4814 ERJ2GEJ183 M.RESISTOR CH 1/10W 18K R4815 ERJ2GEJ683 M.RESISTOR CH 1/16W 68K S6601 K0F111A00589 SWITCH R4816 ERJ2GEJ472 M.RESISTOR CH 1/10W 4.7K...
  • Page 80 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP03H89H ESD P.C.B. UNIT 1 (TMT750) VWJ2172 ESD_FPC 1 (TMT750) VYK4F25 FRONT CASE UNIT VYK3Q71 BARIA CASE UNIT VGL1326 TARY PANEL LIGHT VGL1309 AF PANEL LIGHT N9ZZ00000415 BARRIER MOTOR UNIT...
  • Page 81 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP03J02DQ-S MAIN P.C.B. UNIT 1 (RTL) TMT750GC,GK E.S.D. VEP03J02DN-S MAIN P.C.B. UNIT 1 (RTL) TMT750GD,GT E.S.D. VEP03J02CP-S MAIN P.C.B. UNIT 1 (RTL) SDT750EB,EF,EG,EP E.S.D. VEP03J02CQ-S MAIN P.C.B.
  • Page 82 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VGL1325 REFLECTION SHEET VGQ0K38 EYE CUP VGQ0D06 EVF LENS CASE VDL2175 EVF LENS (A) VGQ0C99 LENS HOLDER (A) VDL2176 EVF LENS (B) VGQ0D00 LENS HOLDER (B) VGQ0K39...
  • Page 83 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks K0RE00600006 SWITCH UNIT VYK4K68 LCD CASE(T) UNIT 1 (TMT750) VYK4K67 LCD CASE(T) UNIT 1 (SDT750) VYK3U03 PANEL UNIT VGQ0K48 LIGHTING PLATE HOLDER VGL1322 PRISM SHEET A VGL1323...
  • Page 84 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VXQ1862 PRISM UNIT VXW1115 LENS UNIT L6HA88NC0006 STEPPING MOTORS VXP3372 IRIS UNIT VMA0X14 SIDE YORK VMA0X14 SCREW VMS8060 SCREW VMS8060 ZOOM GUIDE POLE VMS8061 FOCUS GUIDE POLE L VMS8062...
  • Page 85 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks BATTERY PACK K2GJYDC00004 DC CABLE K1HY12YY0004 MULTI D/RCA CABLE VFA0531 HDMI MINI CABLE K1HY04YY0032 USB CABLE K2CQ29A00002 AC CABLE 1 TMT750GC, SDT750EE,EF,EG,EP,GC K2CR29A00001 AC CABLE 1 TMT750GD K2CT39A00002 AC CABLE...
  • Page 86 HDC-TMT750GC vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VKM8866 BOTTOM CASE VGQ0R05 COVER SHEET VKF4775 ADJUSTMENT DIAIL COVER VYK4K03 TOP CASE UNIT VYK4K17 HORIZONTAL POSITION ADJUSTMENT DIAIL UNIT VXW1189 LENS UNIT VMB4431 SPRING VYK4K01...

  • Page 87: S7. Exploded View

    S7. Exploded View S7.1. Frame and Casing Section (1) B35 B36 B30 B31 S-34...

  • Page 88: S7.2. Frame And Casing Section (2

    S7.2. Frame and Casing Section (2) S-35...

  • Page 89: S7.3. Evf Section

    S7.3. EVF Section S-36...

  • Page 90: S7.4. Lcd Section

    S7.4. LCD Section S-37...

  • Page 91: S7.5. Lens Section

    S7.5. Lens Section B202 B201 B206 B207 B214 B205 B208 B204 B215 B212 B213 B203 B209 B210 B211 S-38...

  • Page 92: S7.6. Packing Parts And Accessories Section

    S7.6. Packing Parts and Accessories Section HDC-TMT750GC/GD HDC-TMT750GK/GT HDC-SDT750EE/EF/EG/EP/GC HDC-SDT750PP HDC-TMT750GC HDC-SDT750EB/GC (HDC-SDT750GC) S-39...

  • Page 93: S7.7. Conversion Lens Section

    S7.7. Conversion Lens Section B408 B411 B410 B409 B412 B406 B407 B413 B414 B415 B405 B401 B404 B403 B402 S-40...

This manual is also suitable for:

Hdc-sdt750ebHdc-sdt750efHdc-sdt750eeHdc-sdt750egHdc-sdt750epHdc-sdt750gc ... Show all

Table of Contents