16. WARRANTY ........................ 22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before maintenance, deactivate the appliance and •...
ENGLISH 2.3 Water connection 2.4 Use • Make sure not to cause damage to • Do not sit or stand on the open door. the water hoses. • Dishwasher detergents are • Before you connect the appliance to dangerous. Obey the safety new pipes or pipes not used for a instructions on the detergent long time, let the water flow until it is...
3. PRODUCT DESCRIPTION Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Air vent...
ENGLISH 4. CONTROL PANEL On/off button Option touchpad Program touchpad Indicators Programme indicators Start touchpad Display Delay touchpad 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase and the rinsing pha- ses operate. Rinsing phase. It comes on when the rinsing phase operates. Drying phase.
ENGLISH Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • XtraDry • Crockery and cut- • Wash 50 °C lery • Rinses • Dry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
6. SETTINGS 6.1 Programme selection start to flash and mode and user mode the display is blank. 2. Press Start. When the appliance is in programme • The indicator selection mode it is possible to set a off. programme and to enter the user mode.
ENGLISH 3. Press Program to change the setting. • The indicator continues to flash. = the rinse aid dispenser is • The display shows the current deactivated. 4. Press the on/off button to confirm setting: = the rinse aid the setting. dispenser is activated (factory setting).
3. Start a program to remove any 1. Open the lid (C). processing residuals that can still be 2. Fill the dispenser (B) until the rinse inside the appliance. Do not use aid reaches the marking ''MAX''. detergent and do not load the 3.
Page 13
ENGLISH 2. Press Delay again and again until the CAUTION! display shows the delay time you Only use detergent want to set (from 1 to 24 hours). specifically designed for 3. Press Start to start the countdown. dishwashers. • The delay indicator comes on to confirm the start of the 1.
Make sure that there is detergent in the 1. Press the on/off button or wait for detergent dispenser before you start a the Auto Off function to new programme. automatically deactivate the appliance. End of the programme If you open the door before the...
ENGLISH • The filters are clean and correctly the door by approximately 10cm at installed. the end of the program. • The spray arms are not clogged. 2. Allow the tableware to cool for 30 - • There is dishwasher rinse aid (unless 40 minutes.
11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.3 Cleaning the upper spray We recommend to clean regularly the upper spray arm to avoid soil to clog the holes.
ENGLISH 11.5 Internal cleaning turn it counterclockwise until it locks into place. • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance.
Page 18
Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty.
ENGLISH 13. TROUBLESHOOTING If the appliance does not start or it stops With some problems, the display during operation. Before you contact an shows an alarm code. Authorised Service Centre, check if you The majority of problems that can can solve the problem by yourself with occur can be solved without the need the help of the information in the table.
Problem and alarm code Possible solution Small leak from the appli- • The appliance is not level. Loosen or tighten the adjust- ance door. able feet (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
ENGLISH 15. INSTALLATION 15.1 Installation Remove entire plastic There should be a minimum The hose should not be membrane from sink trap 2mm gap between the top of extended by more than spigot & fit drain hose to spigot the dishwasher and 2 metres or water pump- with clamp underside of bench top...
CAUTION! plumbing connection. Always use new hoses when The drain hose can be lengthened using you connect the appliance additional lengths and connectors. These to the water mains. Old must be purchased from Electrolux Spare hoses must not be used.
(d) ‘ASC’ means AEG authorised service centres; (viii) failure to comply with any additional instructions supplied with (e) AEG is the brand controlled by Electrolux Home Products Pty Ltd the Appliance; of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341...