Table of Contents
Advertisement
Quick Links
30" (76 CM) FREESTANDING ELECTRIC RANGES
IMPORTANT:
Save for local electrical inspector's use.
W10394782B
INSTALLATION INSTRUCTIONS
Table of Contents
RANGE SAFETY ............................................................................. 2
INSTALLATION REQUIREMENTS................................................ 3
Tools and Parts ............................................................................ 3
Location Requirements................................................................ 3
Electrical Requirements ............................................................... 5
INSTALLATION INSTRUCTIONS.................................................. 6
Unpack Range ............................................................................. 6
Install Anti-Tip Bracket................................................................. 6
Electrical Connection ................................................................... 8
Verify Anti-Tip Bracket Is Installed and Engaged...................... 11
Level Range ............................................................................... 11
Storage Drawer .......................................................................... 11
Oven Door ..................................................................................11
Complete Installation ................................................................. 12
Moving the Range...................................................................... 12
Advertisement
Table of Contents
Related Manuals for Whirlpool 4KWFC120MAW0
Summary of Contents for Whirlpool 4KWFC120MAW0
-
Page 1: Table Of Contents
INSTALLATION INSTRUCTIONS 30" (76 CM) FREESTANDING ELECTRIC RANGES Table of Contents RANGE SAFETY ................2 INSTALLATION REQUIREMENTS..........3 Tools and Parts ................3 Location Requirements..............3 Electrical Requirements ............... 5 INSTALLATION INSTRUCTIONS..........6 Unpack Range ................6 Install Anti-Tip Bracket..............6 Electrical Connection .............. -
Page 2: Range Safety
RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”... -
Page 3: Installation Requirements
INSTALLATION REQUIREMENTS Tools and Parts Location Requirements Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. Read and follow the instructions provided with any tools listed It is the installer’s responsibility to comply with installation here. - Page 4 Product Dimensions Cabinet Dimensions Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
-
Page 5: Electrical Requirements
Electrical Requirements If codes permit and a separate ground wire is used, it is A circuit breaker is recommended. recommended that a qualified electrical installer determine that The range can be connected directly to the circuit breaker the ground path and wire gauge are in accordance with local box (or fused disconnect) through flexible or nonmetallic codes. -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Unpack Range Install Anti-Tip Bracket WARNING WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from range. 2. - Page 7 Floor Mounting 5. Using the Phillips screwdriver, mount anti-tip bracket to the wall or floor with the two #12 x 1⁵⁄₈" screws provided. 6. Move range close enough to opening to allow for final electrical connections. Remove shipping base, cardboard or hardboard from under range.
-
Page 8: Electrical Connection
Electrical Connection Power Supply Cord Direct Wire WARNING WARNING Electrical Shock Hazard Electrical Shock Hazard Disconnect power before servicing. Disconnect power before servicing. Use a new 40 amp power supply cord. Use 8 gauge copper or 6 gauge aluminum wire. Plug into a grounded outlet. - Page 9 Style 2: Direct wire strain relief 2. Feed the power supply cord through the strain relief on the cord/conduit plate on bottom of range. Allow enough slack to Remove the knockout as needed for the flexible conduit easily attach the wiring to the terminal block. connection.
- Page 10 2. Attach terminal lugs to neutral (red), bare (green) ground, and Direct Wire Installation: Copper or Aluminum Wire line 1 (black) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end This range may be connected directly to the fuse disconnect or through bottom of terminal lugs.
-
Page 11: Verify Anti-Tip Bracket Is Installed And Engaged
3. Slowly push the drawer into the range. Verify Anti-Tip Bracket Is Installed and Engaged 1. Remove the storage drawer. See “Storage Drawer” section. 2. Use a flashlight to look underneath the bottom of the range. 3. Visually check that the rear range foot is inserted into the slot of the anti-tip bracket. -
Page 12: Complete Installation
If removing the range is necessary for cleaning or maintenance: Complete Installation For power supply cord-connected ranges: 1. Check that all parts are now installed. If there is an extra part, 1. Slide range forward. go back through the steps to see which step was skipped. 2.