Advertisement
Quick Links
Getting started
Parts
The Bluetooth speaker contains:
Speaker
A/C adapter
Remote control
Use A/C Power Adapter
To use the speakers with A/C power adapter,
connect the power adapter to a wall outlet,
and connect adapter cable to the speaker.
Install AAA batteries
To install batteries, ensure that the speakers
are off, and open the cover of the battery
compartment by pushing the battery cover
button to the right. After the battery cover is
released, place four AAA batteries into the
compartment, and push the cover until it
snaps into place. If the speakers are not used
for a long period, remove the batteries to
prevent plastic cover damage from battery
leakage.
Figure 1
Pick up key (1), Volume up key (2) Volume
down key (3), Drop call key (4), Power
On/Off key (5), Line In port (6), D/C power
port (7)
Omicron Bluetooth Speaker Manual
1
Switch the speakers on or off
To switch on, push the power button to right
and blue light is displayed.
To switch off, push power button to off and
blue light disappears
.
Connect the speaker with Bluetooth
Pairing
1. Power up Tubus Bluetooth speaker.
2. Press and hold the pickup key (1) on the
top of speaker for 3 seconds until the LED
blue lights start flashing.
3. Activate the Bluetooth feature on
iPhone/iPad/iTouch or other smart phone or
music device, and set it to search for
Bluetooth devices.
4. Select device ID "Omicron".
5. Enter the Bluetooth code "0000" to
complete pair. iPhone/iPad/iTouch do not
need to enter any code.
6. After pairing completed, blue lights stop
flashing.
7. ID "Omicron" appears on
iPhone/iPad/iTouch or other smart phone
Bluetooth device menu.
Pairing is needed only first time.
Function Control
Volume up
Press volume up key (2)
Volume down
Press volume down key (3).
Answer a call
When call coming, press pickup key (1)
shortly.
End a call
Press drop key (4) shortly.
Reject a call
Press drop key (4) shortly.
Advertisement
Summary of Contents for Omicron G-VIB2
- Page 1 After the battery cover is Bluetooth devices. released, place four AAA batteries into the 4. Select device ID “Omicron”. compartment, and push the cover until it 5. Enter the Bluetooth code “0000” to snaps into place. If the speakers are not used complete pair.
- Page 2 Omicron Bluetooth Speaker Manual Mute Remote Control Key: When being on the phone, press pickup key (1) and hold 3 seconds to enable mute. Press pickup key (1) and hold 3 seconds again to disable mute. Connect using a cable You can connect the speakers to a device with a 3.5 mm audio cable.
- Page 3 Bluetooth SIG, Inc. iPhone, iPad, and iTouch are registered trademark of Apple Inc. Play/Pause Press play/pause key (4). Omicron operates a policy of ongoing development. Omicron reserves the right to Forward/Rewind make changes and improvements to any of Press forward (3).
- Page 4 FCC ID: Y65G-VIB2 FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.