Page 1
KÏÈÌ·ÙÈÛÙÈÎfi T‡Ô˘ AÂÚ·ÁˆÁÔ‡ E S I P F D G R DB98-04150A(2) OWNER’S INSTRUCTIONS MANUAL DE INSTRUCCIONES ISTRUZIONI PER L’USO MANUAL DE INSTRUÇÕES MANUEL D’UTILISATION GEBRAUCHSANWEISUNG O¢H°IE™ Type Indoor unit ACH1800E ICH1800E ACH2400E ICH2400E ACH3600G ICH3600G ACH4400G ICH4400G CH18ZA CH18ZA CH24ZA...
Safety Precautions The following safety precautions must be taken when using your air conditioner. WARNING URING OPERATION ISPOSING OF THE UNIT THERS Register your product at www.samsung.com/global/register Risk of electric shock. Can cause injury or death. remote electric power supplies before servicing, installing or cleaning.
View of the Unit The figures are shown in this instruction may differ from yours depending on the model. Indoor Unit Air flow blades(outlet) Refer to page 9 Air inlet Air filter(under the grille)
Page 5
Outdoor Unit UBH1800E / 2400E CH18ZAX / 24ZAX CH18CAX / 24CAX Air inlet(Rear) Air outlet Connection valve UCH3600G / 4400G CH36ZAX / 44ZAX CH36CAX / 44CAX Air inlet(Rear) Air outlet Connection valve...
Wired Remote Controller-Buttons and Display The wired remote controller is an optional accessory. The wired remote controller is installed on the wall. Removing frost indicator Communication error indicator On Timer setting Off Timer setting Test indicator Temperature adjustment buttons On Timer button Off Timer button Test button - Test button is for your installation specialist.
Wireless Remote Controller-Buttons and Display The wireless remote controller is an optional accessory. Operating mode Temperature setting Fan speed Air flow direction On Timer setting Off Timer setting Battery discharge indicator After cleaning the air filter, press the filter reset button. Mode selection button Temperature adjustment buttons...
Centralized Controller The centralized controller is an optional accessory. The centralized controller is installed on the wall. Operating lamp comes on when at least one air conditioner connected to the centralized controller is operating. Operating lamp All On button All Off button...
The Indicators on the Unit (For Wireless Remote Controller Only) The receiver & display unit is an optional accessory for the wireless remote controller. On/Off button Timer indicator Remote control sensor On/Off indicator Filter Sign Removing frost indicator indicator...
Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features. The booklet is organized as follows.
Inserting the Wireless Remote Controller Batteries You must insert or replace the remote controller batteries when : You purchase the air conditioner The remote controller does not work correctly Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together.
Page 12
This chapter indicates how to operate and program your air conditioner with the wired remote controller. The wired remote controller is an optional accessory.
The air conditioner runs in the mode selected when the unit was last used. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes.
The air conditioner runs in the mode selected when the unit was last used. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes.
The air conditioner runs in the mode selected when the unit was last used. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes.
The air conditioner runs in the mode selected when the unit was last used. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped It will start up normally after three minutes.
(ON/OFF) button. Result: The On/Off indicator on the wired remote controller comes on. The air conditioner runs in the mode selected when the unit was last used. To select the FAN mode, press the Mode button until the top of the wired remote controller.
To cancel the On Timer, press the On Timer button one or more times until the On timer setting disappears. Press the (Set/Cancel) button. If you want to turn on the air conditioner before the timer reaches the setting time, press the (ON/OFF) button.
Off timer setting. If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the On Timer button until ‘2.0 Hr’ is displayed.
Page 20
This chapter indicates how to operate and program your air conditioner with the wireless remote controller. The wireless remote controller is an optional accessory.
The air conditioner runs in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes.
If necessary, press (ON/OFF) button. Result: The On/Off indicator on the unit comes on. The air conditioner runs in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to...
The air conditioner runs in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes.
The air conditioner runs in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes.
Result: The indoor unit beeps. IMPORTANT When the air conditioner is first turned on, the blades are moved. To stop the blades, press the Swing button again. To set to the required position, press the Swing button again. When the blades are in the required position.
To cancel the On Timer, press the On Timer button one or more times until the timer setting disappears. Press the (Set/Cancel) button. If you want to turn on the air conditioner before the timer reaches the setting time, press the (ON/OFF) button.
Off timer setting. If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the On Timer button until ‘2.0 Hr’ is displayed.
(All ON) button. To turn on/off a specific air conditioner, press the Result: The On/Off indicator comes on when the air conditioner is operating. To turn off the all of air conditioners connected to the centralized controller, press the (All OFF) button.
HEAT mode, the outdoor unit’s fan temperatures and compressor may stop at times. This is normal ; simply wait until the air conditioner switches on again. Power failure If a power failure occurs while the air conditioner is operating, the unit will be switched off.
Safety Clip Wired Remote Controller Wireless Remote Controller To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. IMPORTANT Before cleaning your air conditioner, ensure that you have switched off the electric circuit breaker used for the unit.
Bio-Pure Filter Installation (Optional) The air conditioner can be fitted with a Bio-Pure filter to remove minute dust particles. The service life of the filter is approximately three months depend- ing on the time during which the air conditioner is used.
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges, within which the air conditioner can be used. If the air conditioner is used at... High temperature Low temperature High humidity levels Mode Outdoor Temperature Indoor Temperature Heating -5°C to 21°C approx.
They may save your time and expense of an unnecessary call. Problem The air conditioner does not Check that the breaker used for the air conditioner is switched on. operate at all Wired Remote Controller The air conditioner does not is displayed on the wired remote controller.
Technical Specifications Model Power Supply ACH 1800E ACH 2400E CH18ZA 1Ø, 220-240V~, 50Hz CH24ZA CH18CA CH24CA ACH 3600G ACH 4400G CH36ZA 3Ø, 380-415V~, 50Hz CH44ZA CH36CA CH44CA Package Weight Paper Plastic Wood...
Page 36
THIS AIR CONDITIONER IS MANUFACTURED BY: ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR: QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA: ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR: CE CLIMATISEUR EST FABRIQUE PAR: DIESE KLIMAANLAGE IST FABRIZIERT VON: AYTH H ™Y™KEYH KATA™KEYA™THKE A¶O :...