Related Manuals for Samsung SSA-R2001
Summary of Contents for Samsung SSA-R2001
-
Page 1: User Manual
SSA-R2001 RFID Reader User Manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please visit our website. www.samsungsecurity.com... -
Page 2: Safety Information
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) . When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock. -
Page 3: Important Safety Instructions
Keep out of direct sunlight and heat radiation sources. It may cause fi re. Install it in a place with good ventilation. Avoid aiming the controller directly towards extremely bright objects such as sun. Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus. -
Page 4: Table Of Contents
contents PRODUCT INTRODUCTION INSTALLATION AND EXTERNAL CONNECTION INITIALIZATION OUTPUT FORMAT TROUBLE SHOOTING PRODUCT SPECIFICATION Contents Features What’s included At a Glance Cable Color Scheme Cable Selection Installation Precautions on installation External Connection Output Format Basic Operations WIEGAND Output RS-232 Output 4/8 BIT BURST Output Format Trouble Shooting Product Specifi... -
Page 5: What's Included
product introduction FEATURES This product is an elegant-looking proximity reader equipped with the built-in keypad, which has the maximum of 10cm (4”) read range. It is also supported by backlighting on the keypad, enabling stable operation at night. This product permits user access through authentication of the contactless card and personal identifi... -
Page 6: At A Glance
product introduction AT A GLANCE Front/Rear Keypad 2-PIN Connector 6-PIN Connector 8-PIN Connector Output Selection Switch Tamper Switch Fixing Screw Product Introduction Displays the status of the system operation. Used to enter the ID/password. Can be connected to the power cable. Can be connected to Wiegand, RS-232 communication cables. -
Page 7: Cable Color Scheme
CABLE COLOR SCHEME ❖ 2-PIN Connector I/O Pins Power (+12V) DC +12V Earth-grounding GND (-) ❖ 6-PIN Connector I/O Pins Wiegand Data Output 0 WIK_DATA0 Wiegand Data Output 1 WIK_DATA1 Not Used Not Used RS-232 TX TX OUT Not Used Not Used RS-232-GND ❖... -
Page 8: Installation
installation and external connection INSTALLATION Attach the provided rear panel to the wall and drill two 6-32 holes and one 1/2 inch hole on it. (See [Figure 1]) Refer to [Figure 2] below on how to secure the rear panel to the wall using the provided screws. Apply each of 5 O-rings to the corresponding point as shown in [Figure 2]. -
Page 9: Precautions On Installation
PRECAUTIONS ON INSTALLATION IF INSTALLING ON A METAL WALL If you install the reader on a metal wall, the read range may be reduced. To avoid this problem, it is recommended to insert the spacer between the metal wall and the reader as shown below. -
Page 10: External Connection
Connect to the COM port of the PC. (Connect pin 2 of the DB-9 connector to the purple line; connect the RS-232 Connection black of the device (RS-232 GND) to pin 5 of the DB-9 connector) Installation and External Connection SSA-R2001 Green White Green with white stripes... - Page 11 initialization OUTPUT FORMAT You can adjust the output format of the numeric values from the keypad. You can select 4/8 bit Burst or 34bit Wiegand. Adjust the format according to the controller receiving the keypad input. To change the output format, use the switch on the rear of the product.
- Page 12 initialization BASIC OPERATIONS Initial State (when the power is supplied) When you apply power to the product, it will sound beep three times before entering Standby with the red indicator turned on. Using the card Present the card to the product until you hear a beep and the green indicator turns on. The reader keeps the green indicator turned on while transferring the card data to the controller.
-
Page 13: Output Format
output format WIEGAND OUTPUT Timing Diagram 100us DATA-0 DATA-1 LOGIC Data Format (34-bit) • Bit 1 : Even Parity (bit 2 ~ bit 17) • Bit 2~Bit33 : 4-byte ID Number • Bit 34 : Odd Parity (bit 18 ~ bit 33) n *n : 34 or26 English13... -
Page 14: Rs-232 Output
output format RS-232 OUTPUT Output Waveform +15V Space(=0) Mark(=1) -15V Start Bit Data packet corresponding to ASCII character ‘A’ Data Type START (0X02H) DATA (10 Char) START(0X02H) DATA (10 Char) Check the following settings: Baud Rate : 9600bps Data Bit : 8 Parity Bit : None Stop Bit : 1 ... -
Page 15: Bit Burst Output Format
4/8 BIT BURST OUTPUT FORMAT 4Bit Burst Output Format Keypads Binary 0000 0001 0010 0011 0100 0101 8Bit Burst Output Format Keypads Binary 11110000 11100001 11010010 11000011 10110100 10100101 Hexa Keypads Binary 0110 0111 1000 1001 1010 1011 Hexa Keypads Binary 10010110 10000111... -
Page 16: Troubleshooting
TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. If the trouble persists, please contact the SAMSUNG Customer Service near you. PROBLEM My card is not read properly. When I turn on the product, it sounds a beep with dimly turned on indicator. -
Page 17: Product Specifi Cation
12 Key Numeric Keypad with Back Lighting Operating Temperature -25°C to +50°C Operating Humidity 10% to 90% Relative Humidity Non-Condensing Color / Material Silver with Black/ Polycarbonate Dimension 87.0 x 109.0 x 31.0 (W x H x D(mm)) Weight 160g SSA-R2001 English17... - Page 18 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.