Product accessories carton contents Empty carton. Find the parts shown above before disposing of packing materials. Vacuum Cleaner imagine Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register user manual...
• Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because the following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described WARNING in this manual. cautioN/WarNiNG sYMBoLs used Indicates that a danger of death or serious injury exists.
Safety information iMPortaNt saFetY iNstructioNs Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING : To reduce the risk of fire, electric shock, or injury.
Power foot (Brush roll) FRONT Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. CAUTION Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
Assembling the cleaner Product accessories carton contents Ⓐ Empty carton. Find the parts shown above before disposing of packing materials. A. Vacuum cleaner body B. Handle C. Hose D. Extension Pipe wand accessories Ⓔ The accessories are packed on the cleaner.
Page 7
Makes sure slot guides and inserts. slide fully retracted hose into the handle until you hear a click. Put hose into hose guide down the back of the vacuum cleaner. slide fully connected hose with the inverter. Assembling the cleaner _ 7...
Assembling the cleaner tooL storaGe Attach tools. Clip turbo tool into the caddy on the front of the handle. Attach dusting tool into the dusting tool holder on side of the body. Attach crevice tool into the crevice tool holder on side of the body. 8_ Assembling the cleaner Mini turbo brush (turbine brush) •...
Store cord wraps to keep out of the way while vacuuming. Cord release Up PoWer Foot HeiGHt adjustMeNt The power foot on your SAMSUNG vacuum cleaner can be adjusted to clean several floor surfaces. For optimal cleaning performance, adjust to the lowest practical setting.
Operating the cleaner Power switch/Power foot brush roll switch Power ON/OFF Power control The Power on/off button is located on the top body. Turn on vacuum by power button after plugging cord into electrical outlet. The vacuum is automatically controled by the dirt senser. The dirt sensor is automatic power control by dust amount.
Use caution and turn off the drum-brush when vacuuming throw rugs CAUTION with fringe. Your SAMSUNG vacuum cleaner is equipped with a special internal switch that turns the rotating brush off whenever the vacuum cleaner is in the upright position.
How to operate usiNG accessories Put the cleaner in the upright position to stop the brush-roll rotating, or simply press the brush-roll on/off button. Push down and pull out the handle, while pressing the pipe release button. Remove the hose and handle from the slot. The air flow is automatically inverted by the smart inverter.
LoNGreacH cLeaNiNG The stretch hose is extended for long reach and upstairs. Do not put the your Vacuum cleaner above you on the stairs when cleaning the stairs. Ensure it is positioned against up the bottom stairs. How to operate _ 13...
Maintain tools and filter check rotating Floor Brush and drive Belt You should check your vacuum cleaner’s rotating floor brush and drive belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet.
1. Unplug cleaner from electrical outlet. 2. Remove 3 screws at back of the vacuum cleaner show with a screwdriver. 3. Clean up the smart inverter inside. 4. Refit hose inverter (Check the position carefully) 5. Refit smart inverter and 3 screws.(When refit the smart inverter while slide inverter pushing down) 6.
Maintain tools and filter carton contents brushbar Replacement 1. Remove the tool from the pipe, and turn upside down. Slide the switch to unlock position and remove bottom plate. 2. Remove brushbar and discard. 3. Inspect belt to ensure that it is in good condition.
BiN To remove dust bin from vacuum cleaner, push the dust bin release button. Hold dust bin and push down bin release empty button to empty. Turn grille cyclone for easy dust removal. Ensure bin is empty and close dust bin base.
Maintain tools and filter cleaning the dust bin & re-assembling the dust bin Push down cyclone release button. Turn grille cyclone for clean. Cleaning the clean bin. Rinse with cold water only. Ensure dust bin and grille is completely dry before refitting Fit cyclone assembly inside the bin Line up the front and rear guides and push down secure.
Wash filter and case in cold water only. Repeat until water runs clear. Dry for at least 12 hours. Ensure filter is completely dry before Refitting onto the vacuum cleaner. The HEPA filter should be replaced every 6 months. Check the assembling order when Re-assembling the filter.
• HEPA filter clogged • Dust bin not properly installed • Filter assembly not assembled properly • Pre-filter clogged If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. COUNTRy AUSTRALIA HONG KONG...