Page 1
LC-32HT3U LC-37HT3U LC-42HT3U IMPORTANT IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo. LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN LC-32HT3U LC-37HT3U LC-42HT3U : Please read this operation manual before starting operating the equipment.
LC-32HT3U LC-37HT3U LC-42HT3U LIQUID CRYSTAL TELEVISION OPERATION MANUAL • These TV (LC-32HT3U, LC-37HT3U, LC-42HT3U models) are designed for hotel guest rooms. Each has two modes, PPV TV mode and Normal mode, and the factory preset is PPV TV mode. • The TV is equipped with LODGENET, ONCOMMAND, NXTV, nSTREAMS and SeaChange Pay Per View interface.
For disposal or recycling information, please contact your local authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP (For U.S.A. Only) Trademarks • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
Page 6
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. •...
Page 7
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
The Remote Replicator and the remote control unit are not supplied with this product. The Remote Replicator (model number: AN-H06RCU) and the remote control unit (model number: AN-32HTRC) are available as optional accessories. Contact your nearest Sharp dealer for purchase. See the OPERATION MANUAL FOR HOTEL OPERATOR for details on the TV settings.
Supplied accessories Make sure the following accessories are provided with the product. LC-32HT3U/LC-37HT3U AC cord Cable Clamp (g1) (g1) Page 16 LC-42HT3U AC cord Cable Clamp (g2) (g1) Page 16 NOTE • Always use the AC cord supplied with the TV. Optional accessories Remote Replicator with an RJ-11 cable AN-H06RCU...
Part names TV (Top/Front) Channel buttons (CH s / r ) Volume buttons (VOL l / k ) INPUT button POWER button Remote control sensor OPC indicator** OPC sensor* SLEEP indicator** POWER indicator** NOTE * OPC: Optical Picture Control (See OPERATION MANUAL FOR HOTEL OPERATOR.) ** See page 18 for TV status indicator.
Part names TV (Rear) LC-32HT3U/LC-37HT3U HDMI terminal (INPUT 4) HDMI terminal (INPUT 5) PC IN terminal (INPUT 6) Antenna/Cable in AUDIO input terminals (INPUT 5) DIGITAL AUDIO OUTPUT terminal TRANSPORT terminal* NOTE * The TRANSPORT terminal is designed for hotel communication. Do not use it for other purposes. INPUT 3 terminals INPUT 2 terminals INPUT 1 terminals...
Part names TV (Rear) LC-42HT3U Antenna/Cable in AUDIO input terminals (INPUT 5) DIGITAL AUDIO OUTPUT terminal TRANSPORT terminal* INPUT 3 terminals AUDIO OUTPUT terminals NOTE * The TRANSPORT terminal is designed for hotel communication. Do not use it for other purposes. HDMI terminal (INPUT 4) HDMI terminal (INPUT 5) PC IN terminal (INPUT 6)
Part names Remote control unit (Optional accessory: AN-32HTRC) TV POWER: Switches the TV power on or enters standby. DISPLAY: Displays the channel information. SOURCE POWER: Turns the power of the external equipment on and off. External equipment operational buttons: Operates the external equipment.
Part names Remote Replicator (Optional accessory: AN-H06RCU) The Remote Replicator is only for hotel operators. 1 LEARN indicator: Lights up while storing the TV settings from the TV to the Remote Replicator. 2 DONE indicator: Lights up when storing or transferring is fi...
Preparation Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Preparation Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Preparation Setting the TV Attach your antenna to the back of the TV. (See page 17.) Connect the AC plug for the TV into the AC outlet. • Place the TV close to the AC outlet, and keep the power plug within reach. AC cord CAUTION •...
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. For hotel guests, use the remote control unit supplied by the Pay Per View provider to operate the TV.
• The model AN-52AG1 of the wall mount bracket can be used only with LC-42HT3U. • This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Appendix Troubleshooting Problem • No power • Check if you pressed TV POWER on the remote control unit. (See page 12.) If the • Is the AC cord disconnected? (See page 16.) • Has the power been turned on? (See page 18.) •...
*2 The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units.
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to abuse (including, but not limited...
Page 26
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or other- wise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-D139WJZZ 07P08-MX-NG...