Fujitsu UTY-TFNXZ1 Setting Manual
Wireless lan control for air conditioner
Hide thumbs
Also See for UTY-TFNXZ1:
- Design & technical manual (17 pages) ,
- Design & technical manual (17 pages)
Table of Contents
Advertisement
Wireless LAN control for air conditioner
SETTING MANUAL
With installation instructions (For authorized service personnel only.)
Before using this product, read these instructions thoroughly and keep this
manual for future reference.
* Prepare the following items before using this product.
This product uses a wireless router that supports IEEE802.11b/g/n
wireless LAN standard. Set the connection to the wireless router with
Wireless
WPS to perform communications by wireless LAN. Refer to the op-
Router
eration manual of the wireless router you wish to use, if it supports
IEEE802.11b/g/n or WPS.
Required OS version:
Smartphone
Android OS 4.1 or later
or Tablet PC
iOS 8.0 or later
Android and Google Play are registered trademarks of Google Inc.
App store is a service mark of Apple Inc., registered in the U.S. and other coun-
tries.
IOS is a trademark or registered trademark of Cisco in the U.S. and other coun-
tries and is used under license.
For information on Wireless LAN (WLAN) control, and the full text of the follow-
ing EU declaration of conformity, please refer to the following web site.
http://www.fujitsu-general.com/global/support/
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provid-
ed as follows: Hereby, FUJITSU GENERAL LIMITED declares that the radio equip-
ment type UTY-TFNXZ1 (AP-WB2E) is in compliance with Directive 2014/53/EU.
PART No. 9382562014-02
Items to Check
[Original instructions]
En-1
Advertisement
Table of Contents
Related Manuals for Fujitsu UTY-TFNXZ1
Summary of Contents for Fujitsu UTY-TFNXZ1
- Page 1 SIMPLIFIED EU DECLARATION OF CONFORMITY The simplified EU declaration of conformity referred to in Article 10(9) shall be provid- ed as follows: Hereby, FUJITSU GENERAL LIMITED declares that the radio equip- ment type UTY-TFNXZ1 (AP-WB2E) is in compliance with Directive 2014/53/EU.
-
Page 2: Table Of Contents
(CD-ROM) PIN code is not available for some models. Please check the Wireless LAN label. * For type UTY-TFNXZ1 (AP-WB2E) only. NOTES • The wireless LAN label attached to the WLAN adapter is necessary for wireless LAN set- • Be sure to keep the wireless LAN label by writing the details down or pasting it on the list in “9. -
Page 3: Safety Precautions
1. SAFETY PRECAUTIONS To prevent personal injury, or property damage, read this section carefully before you use this product, and be sure to comply with the following safety precautions. Incorrect operation due to failure to follow the instructions may cause harm or damage, the seriousness of which is classified as follows: This mark indicates procedures which, if improperly per- WARNING... -
Page 4: Usage Precautions
2. USAGE PRECAUTIONS When you use this product, it will become possible to operate the air condition- er from locations where you cannot see it directly. This means that people in the room may be exposed to the unintended operation of the air conditioner. Check the condition of the room before using this product. -
Page 5: Wireless Lan Usage Precautions
3. WIRELESS LAN USAGE PRECAUTIONS When you use a wireless LAN, there are precautions that you must follow in rela- tion to radio waves, personal information, and so on. To use this product correctly, be sure to read the following precautions and the operating manual of the wireless LAN equipment you are using. - Page 6 3.2. Personal Information (Security-related) Usage Precautions There is a possibility of interception if you use wireless LAN equipment due to the use of radio waves regardless of whether you use encryption or not. Wireless LAN uses radio waves to exchange information between this product and the wireless router.
-
Page 7: Preparations For Use
4. PREPARATIONS FOR USE 4.1. Application software installation Open “Google Play” or “App Store” depending on the type of your smartphone or tablet PC. Search for “FGLair”. Install the application software (mobile app) following the instructions on your screen. 4.2. User registration Open the installed mobile app. - Page 8 4.3.1 Button mode *Lighting pattern: Flashing Launch the mobile app. Sign in with your Email address and pass- word (as registered in “4.2. User registra- tion”) following the screen on the mobile john@fgl.com app. Sign in Press the [+] button to add a new air con- ditioner.
- Page 9 Confirm that LED 2 is flashing. (On/off at 2-second intervals.) Then press and hold the Setting button on the WLAN adapter for 3 seconds. (on/off = 2sec/2sec) LED 2 lighting will change. (on/off: 2sec/2sec → 2sec/0.5sec) Confirm that the LED 1 and 2 is both on to proceed.
- Page 10 [For Android] Select the SSID of the air conditioner you are connecting to. AC-UTY-xxxxxxxxxx Input the PIN code written on the WLAN label. (Refer to “Name of parts”) AC-UTY-xxxxxxxxxx Enter password Connect device Select the SSID of the wireless router you are connecting to.
-
Page 11: Initialization (Reset)
Select the SSID of the wireless router you are connecting to. Select the WLAN Access Point Input the wireless router (WLAN Access Enter password Home AP Point) password then press [Connect XYZ AP Connect device device]. ABC123 LED 1 and 2 will both flash 2 times, and a message will appear when setup is com- plete. -
Page 12: Operating Tips
■ To continue use If you or a third party wishes to continue use of the product, follow the procedures in “4. PREPARATIONS FOR USE” to reconnect to a different wireless router. NOTES: Wireless LAN setup is not possible if the previous owner did not unregister or ini- tialize this product. -
Page 13: Troubleshooting
8. TROUBLESHOOTING Check the following items before requesting repairs to this product. Parts/Elements Situation Solutions I don’t know how to Refer to “4.1. Application software installa- Mobile app tion”. (Download and download the mobile account regis- app. tration) I am not able to use the Check that the version of the OS on your mobile app mobile device is supported. - Page 14 Parts/Elements Situation Solutions Operations from I am not able to operate Check that the power to the indoor unit is on. the mobile app this product from the Check that the power to the wireless router is on. mobile app Check that your smartphone is not in flight mode.
-
Page 15: Setting Details
9. SETTING DETAILS Record the setting details in the following table. Setting information SSID MAC address (MAC) System commissioning date Installer contact details Name Telephone no. En-15... -
Page 16: Wlan Adapter Installation (For Authorized Service Personnel Only)
10. WLAN ADAPTER INSTALLATION (For authorized service personnel only) 10.1. Before installing the WLAN adapter WARNING • For the air conditioner to operate satisfactorily, install it as outlined in this installation manual. • Installation work must be performed in accordance with national wiring standards by authorized personnel only. - Page 17 10.1.1 System diagram One WLAN adapter can be connected to each indoor unit. Single system Multiple system Outdoor unit Outdoor unit Indoor unit Indoor unit Indoor unit WLAN adapter WLAN adapter WLAN adapter A, B, and C: Shielded cable attached to this product. En-17...
- Page 18 Prohibited uses: (1) Combined use with wired remote (2) Group connection of indoor units controller Indoor unit Indoor unit Indoor unit (3) Use in simultaneous multi system (4) Extended wiring Extending the cable is prohibited. Outdoor unit Indoor unit Indoor unit Indoor unit Junction box 10.2.
- Page 19 • Use the accessories or specified connection cables. Do not modify connection cables other than those specified, do not use extension cords, and do not use independent branch wiring. The allowable current will be exceeded and cause electric shock or fire. •...
- Page 20 When the WLAN adapter cable needs to be modified. Please refer to “Modifying the WLAN cable” Pattern 3 Attach to the remote controller terminal block by using the Terminal block kit for 3-wire (option). Position the wires so that the colors match. Terminal block kit 1 Red for 3-wire (option)
- Page 21 (3) Connect specified wires securely, and fasten them so that there is no stress applied on the terminals. (4) Use a screwdriver with an appropriate bit size to tighten the terminal screws. Using of screwdriver with inappropriate bit size will damage the screw heads, and the screws will not be tightened properly.
- Page 22 Do not lay the WLAN adapter cable on the floor. You may trip on the cables. GOOD PROHIBITED 10.3. Function setting In addition to the method in the installation manual of the indoor unit, the function setting can also be done from the mobile app. (This procedure should be done by authorized service personnel only.) 10.3.1 Method Perform the function setting according to the installation conditions using the mo-...