Related Manuals for Samsung SSA-R1001
Summary of Contents for Samsung SSA-R1001
- Page 1 SSA-R1001 SSA-R1101 RFID Reader user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please visit our website. www.samsungsecurity.com...
- Page 2 If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) . When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock.
- Page 3 Keep out of direct sunlight and heat radiation sources. It may cause fi re. Install it in a place with good ventilation. Avoid aiming the controller directly towards extremely bright objects such as sun. Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
-
Page 4: Table Of Contents
contents PRODUCT INTRODUCTION Features What’s included At a Glance Cable Color Scheme Cable Selection INSTALLATION AND EXTERNAL Installation Precautions on installation CONNECTION External Connection INITIALIZATION Basic Operations OUTPUT FORMAT WIEGAND Output TROUBLESHOOTING Troubleshooting PRODUCT SPECIFICATIONS Product Specifi cations Contents... -
Page 5: Features
This product is an elegant-looking proximity reader which has the maximum read range of 10cm (4”), can be easily installed on a metal doorframe or the wall. Basically, both SSA-R1001 and SSA-R1101 use the same module with epoxy molding, which guarantees operation in any weather and environment condition. The two different bezels of two models are compatible with each other, meaning one can be replaced with the other according to the wall condition or the applicable situation. - Page 6 product introduction AT A GLANCE Front/Rear Displays the system operation status using red and green indicators. Buzzer Piezo buzzer. Connection Cable Used to connect to the power or I/O cable. Fixing Hole Fixing hole for wall-mounting. Product Introduction...
-
Page 7: Cable Color Scheme
CABLE COLOR SCHEME Item Cable Color Signal Line Description DC +12V DC +12V supplied Power Black Earth-grounding for power Blue Buzzer Control BUZZER Control Input Port Input Yellow LED Control LED Control Input Port Green Out Wiegand 0 Wiegand Data 0 Output Port Output White Out Wiegand 1... -
Page 8: Installation
installation and external connection INSTALLATION - Inserted in the doorframe / attached to the wall Two 6-32 or M3 holes are 3.3” (8.38 cm) away from each other vertically; between the two exists one 1/2” hole through which the reader cables are arranged. The midway hole is located 1.7” (4.31cm) down from the upper hole. (If the product is already installed, you can skip the follow step) Insert the reader cables to the midway hole and fi... -
Page 9: Precautions On Installation
PRECAUTIONS ON INSTALLATION If installing on a metal wall If you install the reader on a metal wall, the read range may be reduced. To avoid this problem, it is recommended to insert the spacer between the metal wall and the reader as shown below. Metal Wall Spacer... -
Page 10: External Connection
EXTERNAL CONNECTION Wiring Diagram SSA-R1001/SSA-R1101 Buzzer Control In Blue LED Control In Yellow CONTROLLER Green Wiegand Data 0 Out Wiegand Data 1 Out White Black DC +12V POWER Item Cable Color Connect the DC+12V to the red line. -
Page 11: Basic Operations
initialization BASIC OPERATIONS Initial State (when the power is supplied) When you apply power to the reader, it will sound a beep before entering Standby with the red indicator turn on . Using the card Present the card to the reader until you hear a beep and the red indicator turns green. When the reader has transferred the data to the controller, it returns to Standby with the red indicator turned on and waits for reading the next card. -
Page 12: Wiegand Output
output format WIEGAND OUTPUT Timing Diagram 100us DATA-0 DATA-1 *n : 34 LOGIC Data Type • Bit 1 : Even Parity (bit2~bit17) • Bit2~Bit33 : 4 byte ID number • Bit34 : Odd Parity (bit18~bit33) Output Format... -
Page 13: Troubleshooting
TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. If the trouble persists, please contact the SAMSUNG Customer Service near you. PROBLEM SOLUTION My card is not read properly. Check the rated voltage specifi ed in the user manual and the catalog. -
Page 14: Product Specifi Cations
PRODUCT SPECIFICATIONS Item SSA-R1001 SSA-R1101 Power / Current DC 12V / Max.80mA Reading Time (Card) 30ms Input Port 2ea : External LED Control, External Buzzer Control Output Port 34bit Wiegand LED Indicator 2 Color LED (Red and Green) - Page 15 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.