SAFETY INFORMATION READ BEFORE USE Please read the following instructions and safety precautions before using the device. For regulatory and additional safety information, refer to the Regulation and Warranty Information sheet included in your package contents. RMN : PP2001 Regulatory Model Identi cation Number is assigned for regulatory identi cation purpose WARNING...
SETUP CHARGE The device uses a built-in rechargable battery. Please fully charge the device via the USB cable before using. ① Plug in the USB cable into the device and a chargeable USB adapter. ② The charging LED light will turn red to indicate charging. ③...
LOAD PAPER ① Remove the paper cover by gently pressing and sliding it forward in the direction of the arrow. ② Open a single pouch of photo paper (10 sheets + blue SMART SHEET™). Blue SMART SHEET™ on bottom with photo papers on top.
Page 8
• For optimal print results, use ZINK™ photo paper for Canon printers. − You may purchase additional photo papers within the Canon Mini Print App by tapping "Buy Paper" in the main menu.
OPERATION POWER ON / OFF ① Press and hold the Power button ( ), the LED indicator light turns on. − The LED indicator will ash as the device is powering on. ② When the LED indicator turns to a steady white , the device is ready to use.
Page 10
ASPECT RATIO • 2 Aspect Ratio (2 x 3 and 2 x 2) can be selected when taking the photo. The Aspect ratio can be changed at anytime. CLIQ + • Set the aspect ratio 2x2, the blank area of the photo paper is di erent, depends on the direction on holding the device.
Page 11
SELFIE ∞ 30 - Focusing distance at 50cm Focusing distance at 50cm (Square Shape) SELFIE TIMER ON APP User can remote control the device through APP such as taking photos. ① Press [ ] on APP to enter Remote Control Page. ②...
FLASH FUNCTIONS When the device is powered on with Auto-Flash selected, the camera will automatically trigger the ash if it is necessary for the light conditions. • There are 8 LEDs Fill Light built in the device around the lens to provide a soft light support when taking photo.
LED INDICATOR Status Operation LED Indicator Power On Press Power On button for around 2 seconds Blue White Standby After the device power on White Power O Press Power O button once SMART SHEET™ When the device detects wrong Error SMART SHEET™...
Page 14
Status Operation LED Indicator MicroSD Card Cannot write data into MicroSD Card Remarks : If MicroSD Card Error Error and Device is Printing, printing LED signal will still ON, until Magenta printing is nished, LED will change to Magenta ashing again Too High When device temperature is Temperature...
MEMRORY • The device has 512Mb internal memory for device operating only. An external MicroSD card (up to 256 GB) is needed for saving captured photos. INSTALL AND REMOVE THE MicroSD CARD – Insert the MicroSD card into the slot at the bottom of the device. You will feel a slight click when the card is fully inserted .
• Make sure the device is fully charge. If not , recharge the device not Work Take Photo • Make sure the device FW is up to date • Make sure print queue bu er is available • Make sure device has Canon ZINK photo paper...
25º C) Photo Aspect Ratio 2" x 2" or 2" x 3" Compatible Paper Canon ZINK™ Photo Paper : ZP-2030-20 (20 sheets) ZP-2030-50 (50 sheets) / 2" x 3" / Peel-and-Stick Back Paper Capacity Up to 10 sheets of ZINK™ photo paper + 1 SMART SHEET™...