Page 3
CONTROLS TOP AND FRONT PANELS 1 DIGITAL EQUALIZER – selects volume or the various frequencies for adjustment: volume, bass, mid and high frequencies 2 VOLUME/SOUND CONTROL CENTER – adjusts the volume level and digital equalizer settings 3 DIGITAL DBB (Dynamic Bass Boost) – enhances the bass 4 INCREDIBLE SURROUND –...
Whenever convenient, use the power supply if you want to conserve battery life. Make sure you remove the plug from the set and wall socket before inserting batteries. BATTERIES (OPTIONAL) 1. Open the battery compartment and insert six batteries, type R-20, UM-4 or D-cells, (preferably alkaline) with the correct polarity as indicated by the "+"...
BASIC FUNCTIONS SWITCHING ON AND OFF • Adjust the POWER slider to the desired sound source: CD, TUNER or TAPE. • The set is switched off when the POWER slider is in the TAPE/OFF position and the keys on the tape deck are released. –...
Playing a CD 1. Select CD source. 2. Press OPEN•CLOSE to open the CD door. ™ Display: when you open the CD door. 3. Insert a CD or CD-R(W) with the printed side facing up and press OPEN•CLOSE to close the CD door. ™...
CD PLAYER Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ programme are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme continuously in random order...
CD PLAYER Reviewing the programme In the stop position or during playback, press and hold down PROG for a while until the display shows all your stored track numbers in sequence. Erasing a programme You can erase the programme by: –...
CD PLAYER GENERAL INFORMATION ON RECORDING • Recording is permissible insofar as copyright or other rights of third parties are not infringed. • This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use only NORMAL type cassettes (IEC I) on which the tabs have not been broken.
RECORDING Recording from the tuner 1. Tune to the desired radio station (see Tuning to radio stations). 2. Press OPEN•STOP /9 to open the cassette door. 3. Insert a suitable tape into the cassette deck and close the cassette door. 4.
GENERAL INFORMATION CD player and CD handling • If the CD player cannot read CDs correctly, use a commonly available cleaning CD to clean the lens before taking the set to repair. Other cleaning methods may destroy the lens. • The lens of the CD player should never be touched! •...
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.