ENGLISH USER MANUAL THANK YOU FOR BUYING AN WHIRLPOOL PRODUCT. For even more complete user support, register your appliance at www.whirlpool.com.hk Index Health and Safety guide SAFETY INSTRUCTIONS ..............5 IMPORTANT TO BE READ AND OBSERVE .
Health & Safety guide SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVE Before using the appliance, read these safety Items such as foam rubber (latex foam), instructions. Keep them nearby for future reference. shower caps, waterproof textiles, rubber backed These instructions and the appliance itself provide important safety warnings, to be observed at all rubber pads should not be dried in the tumble times.
Page 6
Health & Safety guide ELECTRICAL WARNINGS It must be possible to disconnect the . The appliance must be disconnected appliance from the power supply by from the power supply before any installation unplugging it if plug is accessible, or by a multi- .
DETERGENT DISPENSER Prewash Compartment • Detergent for prewash Main Wash Compartment • Detergent for the main wash • Stain remover • Water softener Softener compartment • Softener • Liquid starch Pour softener or starch solution into the compartment without exceeding the “max”...
HOW TO USE THE APPLIANCE FIRST TIME USE See the section DAILY USE for instructions on selecting and starting a programme. IRST CYCLE OPERATION 3. Start the programme without loading the Remove any manufacturing debris: washer dryer machine (with empty drum). 1.
Page 11
1. Follow the instructions given in the - Automatic drying with selectable levels: paragraph “Wash Only” to select and, if In automatic drying mode, the washer dryer necessary, customise the required programme. machine dries the laundry until the set level 2.
SWITCHING THE WASHER DRYER OFF AT THE END OF A PROGRAMME. At the end of the cycle, the message “END” is shown on the display. The door can only be opened when the symbol lights. Check that the door unlocked symbol is lit, then open the door and take out the laundry.
PROGRAMMES Follow the directions indicated in the garment WHITE wash symbols. For washing normally to heavily soiled towels, underwear, table and bed linen, etc in resilient cotton and linen. Only when the temperature is selected at MIXED 90°C the cycle is provided with a prewash phase before For washing lightly to normally soiled resilient main washing phase.
OPTIONS AND FUNCTIONS OPTIONS selectable directly by pressing the relative button START DELAY ! If the selected option is not compatible with To set the selected programme to start the programme set, an error warning tone at a later time, press the button to set the desired delay time.
CLEANING AND MAINTENANCE WARNING dryer. disconnect it from its electrical power supply before performing any cleaning or maintenance operations. CLEANING THE WASHER DRYER EXTERNALLY Clean the washer dryer's external parts using a soft Do not use generic detergents, glass detergents, damp cloth.
CHECKING THE WATER INTAKE HOSE Periodically check the integrity of the water intake hose. If it is found to be damaged, contact Customer Support or an authorised dealer in order to obtain a replacement hose. Based on the type of hose: inspection window (see the arrow).
CLEANING THE FILTERS IN THE WATER INTAKE HOSE . Close the water tap and unscrew the intake hose. . Reconnect the intake hose to the water tap and the washer dryer. Do not use tools to connect the intake hose. Open the water tap and check to make sure that all the connections have been tightened properly.
CLEANING THE DETERGENT DISPENSER Remove the detergent dispenser by pressing Dry with a soft cloth. the release button and pulling on the dispenser at the same time. Re-install the detergent dispenser and close it. Remove the insert from the fabric softener compartment.
Page 20
CLEANING THE WATER FILTER / DRAINING THE RESIDUAL WATER programme has recently been used, wait for the WARNING water to cool before draining it. Make sure that the washer dryer has been shut order to prevent water from remaining inside obstructions.
Page 21
clockwise. should be in its vertical position. In order to check detergent dispenser. Re-install the kick panel. 21 21...
Page 22
TRANSPORT AND HANDLING WARNING Do not lift the washer dryer while holding onto its upper surface. Disconnect the electrical plug and close the water tap. Check to make sure that the door and the detergent dispenser are securely closed. Disconnect the intake hose from the water tap, then disconnect the drain hose.
TROUBLESHOOTING The washer dryer may sometimes not work properly for certain reasons. Before calling the Support Centre, it is recommended to check to see if the problem can be easily resolved using the following list. Anomalies: Possible causes / Solution: The washer dryer does not •...
Page 24
Too much foam is formed. • The detergent is not compatible with the washer dryer (it must bear the wording “for washing machines”, “ for hand washing and washing machines”, or something similar). • The dosage was excessive. The washer dryer does not dry. •...
Page 25
For any repairs that may be required, please contact an authorised Customer Support Centre in order to ensure that the repairs are performed correctly using original spare parts. Manufacturer: Whirlpool EMEA S.p.A. - Socio Unico Via Carlo Pisacane n. 1 20016 Pero (MI) Italy 25 25...