Advertisement
.@
,/'i
W.h,lfllxiol
L-"
K20lK40
ADJUSTING THE ICE CUBE THICKNESS
lce cube thickness is pre-set at the factory. The thickness can be increased or
decreased by turning the thermostat knob with a screwdriver. Turning the
knob clockwise increases the thickness, turning it anti-clockwise decreases
the thickness. By means of the thermostat knob it is possible to adjust the
variations due to the ambient temperature, when it is higher than 32'C and
lower than 10'C.
-
Never turn the thermostat knob outside the field indicated on the dial.
- Adjust the ice thickness thermostat only after a few hours operation and
only after the bin has half-filled with ice cubes.
-
Non-observance
of the thermostat setting rule could result in damage to
the ice maker, especially if the thermostat knob is left on a low getting in a
high room temperature.
In this case the ice could become so thick the ice will not cut. On the other
hand, the ice thickness could be reduced to a minimum or none at all.
Advertisement
