hit counter code
Download
Share
Print this page
Sony BX Series Assembly And Disassembly Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Laptop
  5. BX Series
  6. Assembly and disassembly manual

Sony BX Series Assembly And Disassembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
1.MS-1-D.1
Confidential
Chapter 1. Disassembly & Assembly Guide
1-3. Disassembly & Assembly
- Main Section -
MS-1 Main Section Disassembly
BX Series

Advertisement

loading

Related Manuals for Sony BX Series

Summary of Contents for Sony BX Series

  • Page 1 1.MS-1-D.1 Confidential Chapter 1. Disassembly & Assembly Guide 1-3. Disassembly & Assembly - Main Section - MS-1 Main Section Disassembly BX Series...

  • Page 2: Battery Pack

    Confidential Battery Pack Battery Pack Lock Lever Release Lever Slide the Release Lever to the right side, Slide the Lock Lever to the UNLOCK side. and turn over the Battery Pack to the rear side then remove it. BX Series...
  • Page 3 1.MS-1-D.3 Confidential Screw:B20 Remove the screw. Remove the HDD. BX Series...
  • Page 4 Parts of the HDD Holder (HDD) Insulator (HDD) Screw:B13 Peel off the Insulator (HDD). Remove the three screws, and remove the HDD from the Holder (HDD). Holder (HDD) Door (HDD) Remove the Door (HDD) while disengaging the detent (two places). BX Series...
  • Page 5 Remove the Cover (Memory) while disengaging the detent (two places). Memory Outspread the tabs (arrow 1), and pull out the Memory diagonally upward (arrow 2). *When two Memory are installed, remove the other side of the Memory in the way as above. BX Series...
  • Page 6 When there is a screw in the position of figure, remove Push the lever once and pull out it in the direction the Optical Disk Drive after removing the screw. of the arrow, then remove the Optical Disc Drive. Screw: Red-B2 Blue-B11 / Green-B5 Remove the 12 screws. BX Series...

  • Page 7: Hood (Keyboard)

    Disconnect the FFC and the Harness. Turn over the Hood (Keyboard) to the rear side. *FFC --- Slide the lock lever upward and release the lock. * The detents (10 places) are engaged. Harness --- Pull out it upward. BX Series...
  • Page 8 *1st Model --- Five places *Slide the lock lever in the direction of the arrow, and release the lock. Other --- One place Harness SWX Board Screw: B4 Remove the four screws and the SWX Board. Disconnect the Harness. BX Series...
  • Page 9 *Slide the lock lever in the direction of the arrow and release the lock. [MA] Remark 2nd Model Screw: B4 Double Side Tape SWX Board The FFC is secured with double side tape (two places). Remove the two screws and the SWX Board. BX Series...
  • Page 10 Slide the lock lever in the direction of the arrow the arrow 1, and lift it from the front side lightly. and release the lock, then disconnect the FPC. *Notice : The FPC coming from the Keyboard is connected with Mother Board. BX Series...
  • Page 11 1.MS-1-D.11 Confidential Keyboard -2 Lock Lever Turn over the Keyboard to the front side, and disconnect the FPC. *Slide the lock lever upward and release the lock. BX Series...

  • Page 12: Lcd Section

    2nd Model - B3 Lug Terminal Remove the one screw. * It secures the lug terminal. [MA] 1st Model 2nd Model Kapton Tape Kapton (FPC) Peel off the Kapton Tape. *1st Model --- Three places 2nd Model --- Two places BX Series...
  • Page 13 Kapton Tape Disconnect the Coaxial Cable (two places). Peel off the Kapton Tape. * Disconnect it vertically. Camera Model Camera Model Harness Harness Disconnect the Harness upward and release it from Disconnect the Harness upward. the detent (four places). BX Series...
  • Page 14 [MA] 1.MS-1-D.13(a) Confidential LCD Section -3 1st (WAN (EXT)) Model Screw: B21 [MA] AL Foil (Hinge) LCD Section Remove the four screws and LCD Section. Peel off the AL Foil (Hinge). BX Series...
  • Page 15 2nd Model - B30 Blue-B3 Green: 1st Model - B2 2nd Model - B31 [MA] 2nd Model 1st Model Remove the screws. *1st Model --- 8 places 2nd Model --- 12 places Bracket (KB EX) Remove the Bracket (KB EX). BX Series...
  • Page 16 Remove the three screws. Felica Model Palmrest Turn over the Palmrest to the front side lightly and slide the lock lever Disconnect the FFC. upward to release the lock. And then Disconnect the FFC. Then remove the Palmrest. BX Series...
  • Page 17 Peel off the Sheet (AL-Bracket Bay). EXT Model --- Five places [MA] [MA] 2nd Model 2nd Model Heatsink Heatsink INT Model Harness EXT Model Screw: Red-B3 Blue-B30 Remove the screws. *INT Model --- Four places Disconnect the Harness. EXT Model --- Five places BX Series...
  • Page 18 [MA] 1.MS-1-D.16(a) Confidential Heatsink -2 [MA] 1st (EXT) Model Heatsink Heatsink Harness Lift the right side of the Heatsink and remove it in the direction of the arrow 2. Disconnect the Harness. BX Series...
  • Page 19 1.MS-1-D.17 Confidential [MA] 1st (INT) Model [CHG] Screw: Red-B15 Blue-B24 Harness Remove the two screws. Disconnect the Harness. *Use a 4 mm socket wrench for B15. Remove the Fan. BX Series...
  • Page 20 Remove the screws, and remove the PC Card Connector while disconnecting the connector. * 1st (INT) Model --- Two places Remove the two screws, and remove the Sink (Choke). Other --- One place Screw:B10 Guide (HDD) Remove the three screws and the Guide (HDD). BX Series...
  • Page 21 *1st Model --- Three places Disconnect the Harness (two places) vertically. 2nd Model --- Two places Remark Connector IFX Board Side B IFX Board Remove the IFX Board. Position of the Connector *There is a connector on the rear. BX Series...
  • Page 22 Slide the lock lever in the direction of the arrow to release the lock, Remove the two screws, and remove the Bracket and FPC. and disconnect the FPC. * The Procedure of removing the Bracket is only for 1st Model. BX Series...
  • Page 23 Confidential Bracket (ODD) -2 Screw: Red-B4 Blue: 1st Model - B8 [MA] 2nd Model - B30 Bracket (ODD) Remove the three screws. And remove the Bracket (ODD) while taking out the A portion from under the Mother Board. BX Series...
  • Page 24 Mylar (FFC) Peel off the Tape (Charger/B). Peel off the Sheet and Mylar. Screw:B3 Connector Connector Harness PWS Board Remove the three screws and the PWS Board. * There are connectors (two places) on the rear. Disconnect the Harness. BX Series...

  • Page 25: Modem Card

    [MA] 1st Model INT Model Kapton Tape Screw:B3 Remove the screws. *INT Model --- Two places Peel off the Kapton Tape. EXT Model --- One place Connector Modem Card Harness Connector Remove the Modem Card. Disconnect the Harness. BX Series...
  • Page 26 1.MS-1-D.23 Confidential Rotate the lock screw in a counter clockwise direction by 90 degrees, Remove the CPU vertically. and release the lock. *Be careful not to bend the pins. *Use a 4 mm flat-blade screwdriver. BX Series...
  • Page 27 Remove the Escutcheon (Front) while disengaging the detent (five places). Remove the Button (Wireless) while disengaging the detent (four places). Bracket (Speaker) Speaker Speaker Outspread both sides of the Bracket (Speaker) and remove the Speaker. Remove the Speaker (two places). BX Series...

  • Page 28: Mother Board

    Turn over the Insulator (PCB) from backside, and remove the 12 screws. [MA] * There is a screw under the Insulator (PCB). (1st Model Only) * Use a 4 mm socket wrench for B15 and B16. * Use a 5 mm socket wrench for B18. BX Series...
  • Page 29 Slide the lock lever upward two release the lock Peel off the AL Foil-1. and disconnect the FFC. WAN (EXT) Model WAN (EXT) Model Kapton Tape Copper Foil -2 Peel off the Kapton Tape. Peel off the Copper Foil-2. BX Series...
  • Page 30 Turn over the Mother Board toward the rear. (RJ45+RJ11) in the direction of the arrow. * As the Harness is connected to the rear of the Mother Board, * Then remove the Mother Board. (1st Model) [MA] be careful not to damage the Harness. BX Series...
  • Page 31 [MA] 1.MS-1-D.27(a) Confidential Mother Board -4 2nd Model Modem Card Harness Disconnect the Harness in the direction of the arrow. *Then remove the Mother Board. BX Series...
  • Page 32 Guide Bay Screw:Red-B4 Blue: 1st Model - B4 [MA] 2nd Model - B3 Guide Bay Remove the four screws. Remove the Guide Bay. [MA] Guide Bay 2nd Model Bracket (Push Button) ASSY Remove the Bracket (Push Button) ASSY. BX Series...
  • Page 33 [MA] 1.MS-1-D.28(a) 1.MS-1-D.28(a) Confidential Heat Spreader (ICH) ASSY 2nd Model Screw:B11 Heat Spreader (ICH) ASSY Mylar (Spreader) Peel off the Mylar (two places). Remove the two screws, and remove the Heat Spreader (ICH) ASSY. BX Series...
  • Page 34 Peel off the Tape. *1st Model --- Two places Remove the Sheet. 2nd Model --- One place Bracket Screw:B4 Lug Terminal Harness (RJ45 + RJ11) Remove the two screws and the Bracket. Remove the Harness (RJ45 + RJ11). BX Series...
  • Page 35 Adhesive Tape Remove the screw and peel off the FFC. * Adhesive Tape is attached to the rear of the FFC. Remove the IFX Board. Harness (DC Cable) Bracket (DC) Remove the Harness (DC Cable). Remove the Bracket (DC). BX Series...
  • Page 36 Confidential Parts of the IFX-430 Board Side A 1st Model [MA] Kapton Tape Side A Peel off the Kapton Tape. Slide the lock lever in the direction of the arrow to release the lock, and remove the FFC. BX Series...
  • Page 37 Disengage the detent (one place) while raising the Escutcheon (Left) lightly. in the direction of the arrow with tweezers or the like. * Then remove the Escutcheon (Left). Escutcheon (Right) Remove the Escutcheon (Right) while disengaging the detent (six places). BX Series...
  • Page 38 Sutter (PCMCIA) A Portion Sutter (PCMCIA) Shift the Sutter (PCMCIA) in the direction of the arrow Remove the Sutter (PCMCIA). and remove it from A portion. Sutter (PCMCIA) Rubber (Hinge-R) Spring Remove the Rubber (Hinge-R). Remove the Spring. BX Series...
  • Page 39 Remove the two screws and Cover (Hook-L). arrow 2. [MA] 2nd Model Screw:Red-B5 Cover (Hinge-L) Screw:B4 Blue: 1st Model - B5 Cover (Hook-R) [MA] 2nd Model - B11 Remove the one screw. Remove the two screws and Cover (Hook-R). BX Series...
  • Page 40 Parts of the Housing (Bottom) -2 Cover (Hinge-L) Cover (Hinge-R) Remove the Cover (Hinge-L). Remove the Cover (Hinge-R). Hook (Battery-R) Detent Detent Button (Battery-R) Remove the Hook (Battery-R). Disengage the detent (four places), and remove the Button (Battery-R). BX Series...
  • Page 41 1.MS-1-D.36 Confidential Parts of the Housing (Bottom) -3 Detent Hook (Battery-L) Detent Button (Battery-R) Remove the Hook (Battery-L). Disengage the detent (four places), and remove the Button (Battery-R). Spring (Hook Battery-L) Hook (Battery-L) Remove the Spring (Hook Battery-L). BX Series...

  • Page 42: Update History

    Confidential Update History [ADD]---Addition [DEL]---Deletion [CHG]---Change [COR]---Correction [MA]---Model Addition Date Contents Version No. 2006.08.28 [CHG] Screw (Page 17) 1.30 [MA] (Page 8,9,12,13,13(a),14,15,16,16(a),17,18,19,20,20(a),21,22,25,26,27, 2006.10.20 2.00 27(a),28,28(a),29,31,34) BX Series...