hit counter code
Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Raven Manuals
  4. Control Systems
  5. AccuBoom
  6. Installation manual

Raven AccuBoom Installation Manual

For terragator with liquid bed
Hide thumbs Also See for AccuBoom:

Advertisement

Quick Links

Download this manual
TerraGator with Liquid Bed
AccuBoom™ Installation Manual
P/N 016-0171-062 Rev A
09/15
Copyright 2010, 2015

Advertisement

loading

Related Manuals for Raven AccuBoom

Summary of Contents for Raven AccuBoom

  • Page 1 TerraGator with Liquid Bed AccuBoom™ Installation Manual P/N 016-0171-062 Rev A 09/15 Copyright 2010, 2015...
  • Page 2 Raven Industries shall not be held responsible or liable for the effects of atmospheric conditions and sunspot activity on the performance of our products. Raven Industries cannot guarantee the accuracy, integrity, continuity, or availability of the GPS signal from the U.S.

  • Page 3: Components Needed

    AccuBoom system. See the Viper Installation and Operation Manual for instructions on setting up the software and using the AccuBoom system. You will also need a valid AccuBoom Control activation key for your Viper in order to activate the AccuBoom system.

  • Page 4: Installation

    SECTION 2 INSTALLATION Use the following procedure to properly install the CAN AccuBoom system on a Terragator With Liquid Bed: 1. Connect AccuBoom cable to AccuBoom node. a. Connect the rectangular connectors from the AccuBoom Cable P/N 115- 0171-701 to the CAN Accuboom Node P/N 063-0172-316.
  • Page 5 Mount the Raven CAN AccuBoom Node P/N 063-0172-316 within 5 feet of the air box connectors. 3. Connect AccuBoom cable to the sprayer boom harness. a. Unplug the Terragator boom cable from the Air Box. P/N 016-0171-062 Page3 of 7...
  • Page 6 Tee in the AccuBoom Cable P/N 115-0171-701 between the Terragator boom cable and the boom harness cable. 4. Route the CAN and power cables from AccuBoom harness to the main harness. a. Connect a 12 foot CAN tee cable P/N 115-0171-362 to the CAN connector located on the AccuBoom Cable P/N 115-0171-701.
  • Page 7 CAN Terminator P/N 063-0172-369 was previously removed from. c. Connect the CAN Terminator P/N 063-1072-369 to the other Tee end of the CAN Tee Cable P/N 115-0171-362 located near the AccuBoom node and secure in place. P/N 016-0171-062...
  • Page 8 Locate the CAN power connector located in the area behind the operator ladder. b. Connect the power connector from the AccuBoom Cable P/N 115-0171- 701 to the Terragator CAN power connection. 7. The Terragator With Liquid Bed CAN AccuBoom installation is complete.

  • Page 9: System Troubleshooting

    The CAN AccuBoom Node P/N 063-0172-316 has additional features to allow the user to diagnose the AccuBoom system. The CAN AccuBoom node has a plastic window in the case that allows the user to view green diagnostic lights. The picture below shows the positioning and function of each of the LED lights.
  • Page 11 How Can I Get Service? Bring the defective part and proof of purchase to your Raven Dealer. If your Dealer agrees with the warranty claim, the Dealer will send the part and proof of purchase to their distributor or to Raven Industries for final approval.