Advertisement
Table of Contents
for pressurized fresh water rinse
INSTALLATION AND MAINTENANCE INSTRUCTIONS
THE FOLLOWING ARE CAUTIONARY STATEMENTS THAT MUST BE READ AND
FOLLOWED DURING BOTH INSTALLATION AND OPERATION
WARNING: Raritan Engineering Company, Inc. Recommends that a qualified person or electrician
install this product. Equipment damage, injury to personnel or death could result from
improper installation. Raritan Engineering Company, Inc. accepts no responsibility or
liability for damage to equipment, or injury or death to personnel, that may result from
improper installation or operation of this product.
WARNING: Hazard of Flooding - Any installation made below the waterline must have vented
loop positioned properly and all hose connections should be double-clamped. Dis-
charge seacocks if used, should always be in the closed position when the toilet is not
in use. Failure to do so may result in flooding, property damage and loss of life.
Model and Serial #
L524 1016jlc
FRESH HEAD
MANUAL TOILET
1
1
FRESH HEAD is a manual marine toilet designed to
be flushed with pressurized fresh water. Freshwa-
ter flushing provides an odor free flush since no
sealife can decay in the rim of the bowl. Discharge
pump is a diaphragm pump with telescopic handle
for ease in flushing. The pump can be locked to
prevent waste water back flow.
FRESH HEAD is available in two models:
25M00 Marine bowl
25H00 Household bowl
Both models can have pump installed on right
hand or left hand.
1-856-825-4900
www.raritaneng.com
Advertisement
Table of Contents
Related Manuals for Raritan FRESH HEAD
Summary of Contents for Raritan FRESH HEAD
- Page 1 THE FOLLOWING ARE CAUTIONARY STATEMENTS THAT MUST BE READ AND FOLLOWED DURING BOTH INSTALLATION AND OPERATION WARNING: Raritan Engineering Company, Inc. Recommends that a qualified person or electrician install this product. Equipment damage, injury to personnel or death could result from improper installation.
-
Page 2: Maintenance
These UNLOCK may cause damage to the toilet. Using C.P. a bio-enzymatic toilet bowl cleaner (available from Raritan Engineering Part# 1PCP22) will keep the bowl clean and fresh LOCK smelling. Do not use abrasive cleaners or cleaning pads. - Page 3 INSTALLATION OF REPLACEMENT PARTS Toilet WRONG! Base Overhaul kits and individual parts for your toilet may be ordered through your dealer or direct from Raritan. Correct Orientation of #1228F Flapper Valves WINTERIZING Improper winter lay up is a major cause of marine Toilet toilet failures.
- Page 4 Tools Required Additional Parts Required • 5/16" nut driver to hose clamp • 1/2" NPT male adapter for inlet • Wrench or screw driver • Four stainless steel mounting bolts or lag screws • Bit for drilling mounting surface (minimum 5/16" [8mm]) and washers •...
- Page 5 Below water line installation: Route discharge hose above discharge FRESH HEAD with holding tank and treat- outlet with a vented loop. ment system below water line. Secure all hose with stainless steel hose clamps.
-
Page 6: Parts List
Rinse water for Inlet: 1/2" FPT Average Water consumtion per use: Maximum pressure 150 PSI (10 bar) 1 pint (.47L) for liquid, 3/4 G (2.8L) for solid use Shipping weights: Minimum pressure 5 PSI (0.33 bar) Model 25M000 - 22 Lbs (10 Kg) 3GPM (11.3 L/min) Discharge: 1 1/2"... - Page 7 BOWL & SEAT NOT SHOWN: 1236AW Spud Assembly 1237W Marine-Size Bowl Assembly 25306 Inlet Diaphragm* 1244W White Household-Style Bowl Assembly 25307 Plunger O-ring* 1238SC Marine-Size Seat & Cover 1245SC White Household-Style Seat & Cover * = Included in 2500RK Repair Kit L524 1016jlc...
-
Page 8: Troubleshooting
1. TO OBTAIN WARRANTY SERVICE, Consumer must deliver the product prepaid, together with a detailed description of the problem, to Raritan at 530 Orange St., Millville, N.J. 08332, or 3101 SW 2nd Ave. Ft. Lauderdale, FL 33315. When requesting warranty service, purchaser must present a sales slip or other document which establishes proof of purchase.