Page 1
Operating Instructions Air Conditioner Model No. Indoor Unit Outdoor Unit CS-MXS9UKZ CU-2XS20UKZ CS-MXS12UKZ CU-3XS27UKZ CS-MXS15UKZ CU-4XS30UBZ CS-MXS18UKZ CU-4XS34UBZ CS-MXS24UKZ Operating Instructions 2-13 Air Conditioner Before operating the unit, please read these operating instructions thoroughly and keep them for future reference.
Page 2
Provide fast cooling, maximum comfort, clean air and optimise energy saving Flexibility to connect Single Split System or Multi Split System Air Sunlight sensor and Conditioner to suit your remote control receiver needs. For complete Human activity product features, please sensor refer to catalogue.
Thank you for purchasing Panasonic Air Conditioner. Table of contents Safety precautions ………… 4-5 How to use ……………………… 6-7 To learn more ………………… 8-9 Cleaning instructions ……… 10 Troubleshooting ………… 11-13 Information………………… 26 Accessories • Remote control • AAA or R03 batteries × 2 •...
Safety precautions To prevent personal injury, injury to others or property damage, please comply with the following: WARNING Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below: Indoor unit and outdoor unit This appliances is not intended for accessibility by the general public.
Page 5
Use complete power supply cord without joining. In unavoidable circumstances that CAUTION complete power supply cord without joining is impossible, use an approved connection means (for example: socket and plug). Indoor unit and outdoor unit Power Air Conditioner Do not wash the indoor unit with water, Supply benzine, thinner or scouring powder to avoid damage or corrosion at the unit.
How to use To adjust airflow direction To adjust airflow direction Upper direction AIR SWING Indicator Lateral direction POWER • Do not adjust the flap by hand. TIMER AUTO COMFORT nanoe-G To adjust fan speed POWERFUL QUIET AUTO FAN SPEED •...
Page 7
See "To learn more..." for details. To purify the air • nanoe-G starts automatically when the unit is turned on with • nanoe-G will not start automatically during ON timer if the unit has been turned off by • Can be activated even when the unit is turned off. In this condition, the unit will operate as a fan with AUTO fan speed and flap swing.
To learn more... Operation mode AUTO : During operation mode selection the POWER indicator blinks. COOL : Provides efficient comfort cooling to suit your needs. : Unit operates at low fan speed to give a gentle cooling operation. Energy saving temperature setting Operating the unit within the recommended temperature range may save energy.
Page 9
ECONAVI and AUTO COMFORT ■ Econavi with intelligent eco sensors Intelligent eco sensors detect potential waste of energy using the human activity sensor and sunlight sensor. ■ Auto Comfort with intelligent eco sensors Intelligent eco sensors detect potential waste of energy using the human activity sensor and auto adjust the temperature and fan speed during high activity level to provide comfort environment.
Cleaning instructions To ensure optimal performance of the unit, Indoor unit cleaning has to be carried out at regular Aluminium fin intervals. Dirty unit may cause malfunction and you may see nanoe-G indicator blinks or error code “H99”. Please consult authorised Front panel dealer.
Troubleshooting The following symptoms do not indicate malfunction. Symptom Cause POWER indicator blinks before the unit • This is a preliminary step in preparation for the is switched on. operation when the ON timer has been set. • When ON Timer is set, the unit may start earlier (up to 15 minutes) before the actual set time in order to achieve the desired temperature on time.
Page 12
Troubleshooting When... ■ The remote control is missing or a malfunction has occurred 1. Raise the front panel. 2. Press the button once to use in AUTO mode. 3. Press and hold the button until you hear 1 beep, then release to use in AUTO forced COOL mode.
Page 13
How to retrieve error codes If the unit stops and the TIMER indicator blinks, use the remote control to retrieve the error code. Press for 5 Press until you hear beep seconds sound, then write down the error code TIMER TIMER CANCEL CANCEL...
Information/信息 English Information for Users on Collection and Disposal of Old Equipment and used Batteries [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.