Advertisement
Quick Links
DIS-100G-6S/DIS-100G-10S
Unmanaged Industrial Gigabit
Ethernet Switch
Quick Installation Guide
Overview
The DIS-100G-6S and DIS-100G-10S unmanaged
Industrial Gigabit Ethernet Switch solutions are designed
for supporting standard industrial applications without
complex setup to make the network truly plug-and-play.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
Package Checklist
Please verify that the box contains the following items:
Item
Unmanaged switch
DIN-Rail kit
DC power terminal block
Quick Installation Guide
Ver. 1.00(WW)
2020/05/25
Safety Instructions
When a connector is removed during installation, testing, or
servicing, or when an energized fiber is broken, a risk of
ocular exposure to optical energy that may be potentially
hazardous occurs, depending on the laser output power.
The primary hazards of exposure to laser radiation from an
optical-fiber communication system are:
Damage to the eye by accidental exposure to a beam
emitted by a laser source.
Damage to the eye from viewing a connector attached
to a broken fiber or an energized fiber.
Documentation Conventions
The following conventions are used in this quick installation
guide to emphasize information that will be of interest to the
reader.
Danger — The described activity or situation might or
will cause personal injury.
Warning — The described activity or situation might or
will cause equipment damage.
Caution — The described activity or situation might or
Quantity
will cause service interruption.
Note — The information supplements the text or
1
highlights important points.
1
1
1
5402647
DIN-Rail Mounting
Mounting step:
1.
Screw the DIN-Rail bracket on with the bracket and
screws in the accessory kit.
2.
Hook the unit over the DIN rail.
3.
Push the bottom of the unit towards the DIN Rail until it
snaps into place.
2
3
Unit: mm
DIS-100G-6S
DIS-100G-10S
1
Advertisement
Related Manuals for D-Link DIS-100G-6S
Summary of Contents for D-Link DIS-100G-6S
- Page 1 Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber. Overview The DIS-100G-6S and DIS-100G-10S unmanaged Documentation Conventions Industrial Gigabit Ethernet Switch solutions are designed for supporting standard industrial applications without The following conventions are used in this quick installation complex setup to make the network truly plug-and-play.
- Page 2 Pin Assignment gauge 0.75 mm NOTE: 1,2 T/Rx+, T/Rx- The DC power should be connected to a DIS-100G-6S DIS-100G-10S 3,6 T/Rx+, T/Rx- well-fused power supply. 4,5 T/Rx+, T/Rx- 7,8 T/Rx+, T/Rx- Alarm Relay Connecting...
- Page 3 • Keep the product away from radiators and other heat sources. information. 庭環境で使用すると電波妨害を引き起こすことがありま • Always unplug the product from mains power before cleaning す。 この場合には使用者が適切な対策を講ずるよう要求さ and use a dry lint free cloth only. れることがあります。 VCCI-A Please contact the authorized distributor of D-Link for related accessories for purchase and installation.