Advertisement
Get To Know Your Switch
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
Introduction
Thank you for purchasing the Cisco CBS Series Switch. The Cisco CBS Series Switches combine powerful
network performance and reliability with a complete suite of network features that you need for a solid business
network. These expandable Gigabit Ethernet switches, with Gigabit or 10-Gigabit uplinks, provide multiple
management options, rich security capabilities, and Layer-3 static routing features far beyond those of an
unmanaged or consumer-grade switch, at a lower cost than fully managed switches.
Before You Begin
Before you begin installing your device, ensure that the following items are available:
• RJ-45 Ethernet cables for connecting network devices. A category 6a and higher cable is required for
• Tools for installing the hardware.
Introduction, on page 1
Rack Mounting Switch, on page 2
Wall Mounting a Switch, on page 3
Stacking the Switches, on page 5
Power over Ethernet Considerations, on page 7
Front Panel, on page 9
Configuring Switches, on page 11
Restoring Factory Default Settings, on page 13
Navigation, on page 14
10G ports; a category 5e and higher cable is required for all other ports.
• The rack-mount kit packed with the switch contains four rubber feet for desktop placement, and
two brackets and twelve screws for rackmounting.
• If the supplied screws are lost, use replacement screws in the following size:
• Diameter of the screw head: 6.9 mm
• Length of face of screw head to base of screw: 5.9 mm
• Shaft diameter: 3.94 mm
Get To Know Your Switch
1
Advertisement
Table of Contents
Related Manuals for Cisco CBS Series
Summary of Contents for Cisco CBS Series
-
Page 1: Table Of Contents
Navigation, on page 14 Introduction Thank you for purchasing the Cisco CBS Series Switch. The Cisco CBS Series Switches combine powerful network performance and reliability with a complete suite of network features that you need for a solid business network. These expandable Gigabit Ethernet switches, with Gigabit or 10-Gigabit uplinks, provide multiple management options, rich security capabilities, and Layer-3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than fully managed switches. -
Page 2: Rack Mounting Switch
Get To Know Your Switch Rack Mounting Switch • A computer to manage the device either via the console port or via the web-based interface. for web based interface the computer needs to support one of the following browsers: • Microsoft Edge •... -
Page 3: Wall Mounting A Switch
Get To Know Your Switch Wall Mounting a Switch Supplied rack mounting for switch models with front mounting position. The mounting ears sit flush to the front panel. Wall Mounting a Switch You can mount the switches on a wall, using wall studs or to a firmly attached plywood mounting backboard. Caution Read these instructions carefully before beginning installation. - Page 4 Get To Know Your Switch Wall Mount an 8 Port Switch Step 3 After the brackets are securely attached, mount the switch with the front panel facing down. Make sure that the switch is attached securely to wall studs or to a firmly attached plywood-mounting backboard. Wall-mounting a 24-port switch. Wall-mounting a 24-port Wall Mount an 8 Port Switch To wall-mount a 8-port switch using mounting screws, follow these steps:...
-
Page 5: Stacking The Switches
Get To Know Your Switch Stacking the Switches Step 7 Remove the screw template from the wall. Step 8 Place the switch onto the mounting screws, and slide it down until it locks in place.Wall-mounting an 8-port switch Figure 4 Wall-mounting an 8-port switch Stacking the Switches A stack can have multiple devices in it. - Page 6 Ethernet cables or Cisco approved modules or cables for the switches. Stack Management The Cisco Business switches have a couple of different stacking modes and you can stack different models. Also you need to note what feature may of may not be available in different stacking modes (native or hybrid).
-
Page 7: Power Over Ethernet Considerations
Get To Know Your Switch Power over Ethernet Considerations Feature CBS350 10G uplink port CBS350 10G network port Hybrid stack SKUs” SKUs” PoE support Supported on specific Not supported Per SKU type SKUs Default number of VLAN Mapping entries Default IP address On VLAN 1 On OOB On VLAN 1... - Page 8 Get To Know Your Switch Power over Ethernet Considerations SKU Name Description PoE PD Chipset Type PoE PSE Support CBS350-8FP-2G 8-Port Gigabit PoE TPS2388 AF/AT Managed Switch CBS350-8FP-E-2G 8-Port Gigabit PoE TPS2388 AF/AT Managed Switch CBS350-16P-2G 16-Port Gigabit PoE 2*TPS2388 AF/AT Managed Switch CBS350-16P-E-2G...
-
Page 9: Front Panel
The ports, LEDs, and Reset button are located on the front panel of the switch, as well as the following components: Cisco Business 350 Series Model Note Models may differ within the CBS 350 series and this is just a representation of a model within the series. - Page 10 These ports are also commonly referred to as mini 10GigaBit Interface Converter ports. The term SFP+ is used in this guide. • The SFP+ ports (if present) are compatible with the following Cisco SFP 1G optical modules MGBSX1, MGBLX1, MGBLH1, MGBT1, as well as other brands.
-
Page 11: Configuring Switches
The following table shows the default settings used when configuring your switch for the first time. Parameter Default Value Username cisco Password cisco LAN IP 192.168.1.254 Configuring Your Switch Using the Web-based Interface To access the switch with a web-based interface, you must know the IP address that the switch is using. - Page 12 When the login page appears, choose the language that you prefer to use in the web-based interface and enter the username and password. The default username is cisco. The default password is cisco. Usernames and passwords are both case sensitive. Step 7 Click Log In.
-
Page 13: Restoring Factory Default Settings
Console access also provides additional interfaces for debug access which are not available via the web interface. These debug access interfaces are intended to be used by a Cisco Support Team personnel, in cases where it is required to debug device’s behavior. -
Page 14: Navigation
Get To Know Your Switch Navigation • To reboot the switch, press and hold the Reset button for less than ten seconds. • To restore the switch to its factory default settings: • Disconnect the switch from the network or disable all DHCP servers on your network. •...