Advertisement
Quick Links
thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. Safety
Warning! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
‰
Do not use this tool if any parts are missing or damaged.
8
Do not use this tool for any purpose other than that for which it is designed.
8
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
9
Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
9
Maintain correct balance and footing, Do not over-reach. ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and other unauthorised persons away from the working area.
9
Keep yourself and tools away from hot engine parts.
9
Maintain the tool components in a good and clean condition for best and safest performance.
9
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
ensure that the motorcycle is standing on a level surface and that it is adequately supported on its own centre stand, or by other
9
means, before commencing any work.
ensure that the motorcycle's engine is turned off.
9
Do not use this tool when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
When work is completed, clean tools and replace in the carrying case and store in a safe, dry, childproof location.
9
Do not use power tools or extensions with these tools. Hand tighten only.
8
2. introDuction
Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links. Set is also ideal for use on
horticultural and agricultural machinery. Includes tools designed for riveting and plate holder for connecting links accurately.
3. contentS
© Jack Sealey limited
Heavy-Duty Motorcycle cHain
Splitter & riveting tool Set
Model no:
Wear protective
Wear safety
gloves
footwear
Original Language Version
SMc4
Wear protective
clothing
item no.
Description
SMC4.01
Pin Holder
SMC4.02-04
Main Body
SMC4.05
Plate Holder
SMC4.06
Pin 3mm
SMC4.07
Anvil 3mm
SMC4.08
Pin 4mm
SMC4.09
Anvil 4mm
SMC4.10
Pin 5mm
SMC4.11
Anvil 5mm
SMC4.12
Blow Mould Case
SMC4 Issue 1 15/11/19
Advertisement
Related Manuals for Sealey SMC4
Summary of Contents for Sealey SMC4
- Page 1 SMc4 Model no: thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Use a 27mm spanner to hold the pin holder body and a 19mm spanner to turn the pin holder. Turn the pin holder clockwise and proceed to start push fitting the link plate onto the pins (fig.3.6). Back off the pin holder and remove the plate holder, then follow the instructions for riveting in 4.3.3. fig.3 fig.4 Original Language Version © Jack Sealey limited SMC4 Issue 1 15/11/19...
- Page 3 Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey group, kempson Way, Suffolk business park, bury St edmunds, Suffolk. ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk...