Page 1
FV-DB1E TINSEA025SJZZ Thank you for purchasing this SHARP product. DAB RECEIVER To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MODEL FV-DB1E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/customersupport.
Page 2
Where plug destroyed immediately and disposed of in a safe manner. this is not possible, please visit our web-site www. sharp.co.uk/ Under no circumstances should the cut-off plug be inserted else- customersupport.
Keep the volume plied with this unit as it may be damaged. moderate when listening to music. ! SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorised service centre. 04/4/12 FV-DB1E_1.fm...
Power source FV-DB1E " Inserting memory batteries " Using with the main batteries Memory batteries maintain the clock setting and preset stations for When the unit is powered by the main batteries, make sure to install the tuner. memory batteries. Otherwise preset stations, the clock setting and DAB setting will be all lost when the main batteries run out.
General control FV-DB1E " Adjusting the volume Press the VOLUME (+ or -) button to increase or decrease the vol- ume..39 40 " Adjusting the bass Press the SOUND button to select "Bass". Within 30 seconds, press the VOLUME control to adjust the bass.
Listening to the DAB (Digital Audio Broadcasting) FV-DB1E " About DAB (Digital Audio Broadcasting) " Auto tune Digital Audio Broadcasting is a digital transmission system where When turned on for the first time, the unit scans radio stations audio signals are converted to digital signals for broadcasting.
Page 9
FV-DB1E " Retuning the unit (Auto tune) " Selecting a station in the station list Once a DAB station is received, you can select stations in the sta- You can retune the radio when you move the unit to other areas or tion list.
Page 10
Listening to the DAB (Digital Audio Broadcasting) (continued) FV-DB1E ! Manual tune You can manually store stations which Auto tune cannot find. If reception is poor, you can adjust the sensitivity. Manual tune is only available after Auto tune. Perform Auto tune first.
Various settings FV-DB1E ! Changing the station order ! Adjusting the DRC value You can change the order of stations in the station list. When the volume is low, adjust the DRC (Dynamic Range Control) value to make the sound more audible (may not available for some Press the BAND button until "DAB"...
Changing the information display FV-DB1E You can switch information in the lower part of display. Press the INFO button. Each time the button is pressed, the information display changes in the following order. When "Not available" appears, the INFO button does not allow you to change the display.
Listening to the FM FV-DB1E Press the ON/STAND-BY button to turn the power on. Press the BAND button until "FM" ap- pears on the display. Press the TUNING ( ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station.
Storing stations FV-DB1E Hold down the PRESET button (1 - 5) for 2 seconds or more to store the station in memory. Repeat steps 1 - 3 to set other stations, or to change a pre- set station. When a new station is stored in memory, the station previously memorised will be erased.
Alarm operation FV-DB1E At the set time, the alarm sounds or the radio turns on. Press the ON/STAND-BY button to turn the power on. Once set, the alarm performs the operation every day. To use "Radio" as an alarm, tune in to a station and adjust Use when...
Sleep operation Alarm operation (continued) FV-DB1E When the set time elapses, sound is muted with the power on. Stopping the alarm: Before setting sleep: Press the ON/STAND-BY button. For the sleep operation, connect the AC adaptor to the unit. If batteries are the only power source, setting is not possible About snooze function: (see page 6).
Enhancing your system FV-DB1E Turn off all other equipment before making this connection. ! Digital connection to an MD recorder, etc. You can record DAB sound using an MD recorder, etc. Notes: " Plug in each cable fully to prevent noise interference.
If something is wrong with this product, check the following before (mechanical shock, excessive static electricity, abnormal supply calling your authorised SHARP dealer or service centre. voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
Specifications FV-DB1E ! Cleaning the cabinet As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product Periodically wipe the cabinet with a soft cloth and a diluted soap improvement without prior notice. The performance specification fig- solution, then with a dry cloth.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed Service Facility within one year from the date this product was purchased. Proof of purchase must be provided.
Page 21
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...