Samsung GALAXY S 5 SCL23 Basic Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

SCL23

Basic Manual

Table of Contents

Summary of Contents for Samsung GALAXY S 5 SCL23

Page 1 SCL23 Basic Manual...
Page 2: Preface
Preface Safety Precautions Thank you for purchasing the GALAXY S5 (referred to as the Before you start using the product, be sure to read the "product" in this manual). Before using the product, be sure to "Safety Precautions" to ensure correct use. read the Setting Guide and Basic Manual (this PDF manual) to Before you assume that the product is malfunctioning, check ensure correct usage. for possible remedies in the following au Customer Support site of au homepage: Instruction Manuals http://www.au.kddi.com/support/mobile/trouble/repair ■ "Setting Guide"/"Basic Manual" (This PDF Before Using the Product Manual) • Communication is not possible even inside the service Handles only basic operations of major functions of the area in places where the signal does not reach (e.g. product. tunnels and basements). Also, communication is For detailed descriptions on various functions, refer to the Full sometimes not possible in poor reception areas. Instruction Manual (Japanese) available on the au homepage Communication is sometimes interrupted if you move into or "Instruction Manual" application on your product. a poor reception areas during communications. http://www.au.kddi.com/support/mobile/guide/manual/ • Since this product uses radio waves, the possibility of • Company names and product names referred to in this communication intercepts by third parties cannot be manual are trademarks or registered trademarks of eliminated. (Though LTE/CDMA/GSM/UMTS system has respective companies. The TM and ® marks may be omitted highly secure confidential communication features.) in this manual. • This product is compatible with the international roaming service. Each network service described in this manual ■ Instruction Manual application varies depending on the area and service content. ...
Page 3 • To use it overseas, check the condition such as • Be careful not to be loud while talking. regulations of the country/region. • Ask permission if you take photos with your cell phone • When the product is used by a child, parents or guardians camera. should thoroughly read the "Basic Manual" (this manual) ■ Consider people around you! and teach the child how to use it. • There may be a person with a cardiac pacemaker nearby ■ Use of the product is not allowed in the at a place filled with people such as in a crowded train. following places! Set "Airplane mode" or turn off beforehand. • When a medical institution has laid down designated areas • Do not use a cell phone while driving a car or riding a where use of the product is prohibited or is not allowed motorbike or bicycle. It may cause a traffic accident. Use to be brought in, abide by the instructions of that medical of a cell phone while driving a car or motorbike is prohibited institution. by law. Use of a cell phone while riding a bicycle may be punishable by some regulations. • Do not use this product while you are aboard an airplane. Use of electric devices transmitting radio waves in airplane is prohibited by law. Some airline companies, however, allow their passengers to use cell phones. For details, contact the airline company you use. ■ Pay attention to the place of use and volume of your voice! • To prevent ringtone from bothering other people, not only refrain from making a call but also power off or use Silent mode at a movie theater, theater, museum, library, etc. • In a city area, use in a place where you do not bother people walking. • It is extremely dangerous to walk while looking at the screen of the cell phone Do not make calls or operate a cell phone while walking or by stopping suddenly. • Move to a place where you do not disturb others while you are in shinkansen, a hotel lobby, etc.
Page 4: List Of Packaged Items
List of Packaged Items Before you start using the product, make sure that you have all the following packaged with the product. Phone (including back cover) Battery pack (SCL23UAA) Desktop Holder (SCL23PUA) Samsung 1Seg antenna 01 (with S View cover adjusting (01SCHSA) attachment) ・ Stereo Headset with Microphone (sample) ・ microUSB connection cable (sample) ・ Warranty (Main unit, desktop holder) (Japanese) ・取扱説明書 (Instruction Manual) (Japanese) ・設定ガイド (Setting Guide) (Japanese) The following items are not included in the package. ・ microSD memory card ・ AC adapter ・ Please purchase a specified charger (sold separately). ・ Illustrations used in this manual are just images for explanations. They may be different from actual ones.
Page 5: Table Of Contents
® Notes on using Bluetooth /wireless LAN (Wi-Fi ) functions ... 28 Character input ....................50 Notes on packet communication charge ..........30 Switching the keyboard .................. 50 Notes on applications ..................30 Entering text with Samsung Japanese keypad ........50 Getting ready ..............31 Phone ..................51 Names of parts and their functions ............31 Making calls ......................51 Attaching/removing the battery pack ............. 33 Using history to make a call ................. 51 Attaching the battery pack ................33 Calling overseas from au phones (au International Call Service) ..52 Removing the battery pack ................
Page 6 Receiving E-mail ....................54 Attaching a microSD memory card ............64 Changing address ..................... 55 Removing a microSD memory card ............65 Using SMS......................55 Formatting a microSD memory card ............65 Creating and sending an SMS ..............55 Using Samsung Kies ..................65 Receiving SMS ....................56 Using PC-mail ..................... 56 Data communication ............66 Using Gmail ......................56 ® Using the wireless LAN (Wi-Fi ) function ..........66 Creating and sending Gmail ...
Page 7 Appendix/Index ..............71 Introduction of related accessories ............71 Using Stereo Headset with Microphone (sample)....... 72 Troubleshooting ....................72 Updating Software ................... 73 Downloading and updating software ............73 Connecting to a PC for updating software ..........73 After-sales service ..................74 Main specifications ..................76 Specific Absorption Rate (SAR) of cell phones ........77 FCC Notice ......................78 FCC RF exposure information ..............79 Body‒worn operation ..................79 European RF Exposure Information ............79 Declaration of Conformity ...
Page 8: Safety Precautions
■ Note on Screenshots Illustrations and descriptions in this The illustrations and screenshots used in this manual are Manual simplified and may look different from the actual screens. ■ Note on key illustrations Sample screen Actual screen Icons at the top of In this manual, the key illustrations are simplified as shown the screen are below. omitted. ◎ In this manual, "microSD memory card", "microSDHC memory card" and "microSDXC memory card" are abbreviated as "microSD memory card" or "microSD". ◎ All of the indicated amounts exclude tax unless otherwise specified. ■ Description of operations for selecting Exemptions item/icon/key, etc. • The Company is not liable for any damages arising from In this manual, operation steps are described as follows. earthquakes, lightning, storms, floods or other natural Tapping is lightly touching a key or icon displayed on the disasters, as well as fires, actions by third parties, other screen with your finger. accidents, intentional or mistaken misoperation by the Description Explanation customer, or use under other unusual conditions outside On the home screen, Tap [Apps] on the home screen, the responsibility of the Company. [Apps]→ [Settings] → ...
Page 9: Safety Precautions (Observe Strictly)
This symbol indicates the potential and imminent • It is recommended you keep a copy of important data Danger danger of death or serious injury to a person. on your PC's hard disk, etc. Whatever the cause of the defect or malfunction may be, the Company assumes no This symbol indicates the possibility of death or Warning responsibility for alteration or loss of saved data. serious injury to a person. * "The Company" as appears in this manual refers to the following companies: Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY This symbol indicates the possibility of personal Imported by: SAMSUNG ELECTRONICS JAPAN Co., Ltd. Caution minor injury to a person or physical damage Manufactured by: Samsung Electronics Co., Ltd. *1 Serious injury: This refers to loss of sight, injury, burns (high- and low- temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or ◎ Reproduction of the content of this manual in part or in whole is longterm hospital attendance as an outpatient. prohibited. *2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term ◎ The content of this manual is subject to change without notice. hospital attendance as an outpatient. ◎ Every effort has been made in the preparation of this manual. *3 Physical damage: This refers to extended damage to buildings, furniture, ...
Page 10 ■ Explanation of graphic symbols used in this manual Do not put the product in a cooking apparatus such as microwave oven or a pressure vessel. Doing so might cause Indicates that use in a ignition, rupture, fault, fire or injury. place where the product Indicates an action that is likely to get wet or Do not throw the product into a fire or heat it. Doing so might is not allowed. allowing the product to cause ignition, rupture or fire. get wet is not allowed. Do not short-circuit the connection terminals. Do not allow Indicates that handling Indicates an action that conductive foreign objects (metal fragments, pencil leads, with wet hands is not must be done. etc.) to come into contact with or get inside the connection allowed. terminals. Doing so might cause fire, burns, a fault due to heat Indicates that the generation. Indicates that power plug must be disassembly is not When using a metal accessories, etc., take sure not to allow disconnected from the allowed. the metal part come in contact with the connection terminals power outlet. or power outlet. Doing so might cause electric shock, ignition, injury or a fault. ■ Precautions common to the product main unit, Do not expose the camera lens to direct sunlight for an battery pack, charging equipment, au Micro IC extended period. Doing so might cause ignition, rupture or fire by the light-collecting mechanism of the lens. Card (LTE), peripheral devices The customer is not allowed to disassemble, modify or repair ...
Page 11 If the product is damaged because it is dropped or something, Do not leave on unstable places such as rocky stands or and its display is cracked or internal parts are exposed, do not tilting surfaces especially while the vibration mode set. touch the cracked display or exposed parts with your hands. Dropping the product may cause injury or damage. Also, pay Doing so might cause electric shock or injury from damaged sufficient attention to impact, etc. parts. Contact an au shop or Keitai Guarantee Service Center. Do not cover or wrap the product with bedding, etc. while using or charging the product. Doing so might cause fire, fault If the wet product is charged, electric shock, short circuit, or injury. or corrosion may occur and overheating may cause fire, Do not touch the main unit or the specified AC adapter (sold malfunction or burns. separately) for a long time while power is being supplied from an external source. Doing so might cause low-temperature Although this product model has the waterproof property, stop burns. use if liquid such as water gets inside the main unit from the The product may become hot by prolonged use especially microUSB connection terminal cover, the headset connection in high-temperature environment. Be careful when using the terminal, the speaker, etc. Continued use of the product in this product touching your skin for a long time, as it might cause state might cause overheating, fire or a fault. low-temperature burns. When removing the back cover, do not exert more than Do not use power outlets or wiring apparatus beyond its rating. necessary force. The battery pack might jump out, for Also, exceeding rating, for example, by connecting multiple example, and cause injury or a fault. devices to a single power strip might cause overheating and Do not operate the product while driving an automobile or fire. motorized bicycle, riding a bicycle or walking. Doing so may compromise traffic safety and cause an accident. Do not use the product with the back cover removed. If charging is not completed after the specified charging Do not place near corrosive chemicals or in places where ...
Page 12 When inserting Stereo Headset with Microphone (sample), The product sometimes affects high-precision electronic etc. into the product, adjust the volume to the proper level. devices. So, turn it off near such devices. (Examples of Setting too loud a volume or using the earphone continuously electronic devices that might be affected by the product for a long period of time might adversely affect your ears. Also, include cardiac pacemakers, hearing aids, other electronic raising the volume too high might prevent you from hearing medical devices, fire alarms, and automatic doors. If you sounds around you, which might in turn lead to a traffic are using an electronic medical device, contact the device accident at a railroad crossing or pedestrian crossing. manufacturer or retailer for information about the possible affect of radio waves.) When adjusting the volume with Stereo Headset with Microphone (sample), etc. inserted into the product, raise the When using the product near an implanted pacemaker, volume a little at a time. If you raise the volume too much from implanted cardioverter-defibrillator or other electronic medical the outset, sudden loud noise from the earphone, etc. might device, radio waves might affect these units and devices. So, adversely affect your ears. please observe the following. 1. Those with an implanted pacemaker or implanted When using a charging equipment or external device, insert/ cardioverter-defibrillator should carry or use the product remove the connector straight to/from the terminal. Make at least 15 cm away from the pacemaker or cardioverter- sure the orientation of the connector is correct. Unless it is defibrillator. correct, it may cause damage or a fault. 2. Turn the product off or turn "Airplane mode" on when it may be difficult to keep at least 15 cm away from others such ■ Main unit as in a situation you cannot move freely, since there may be people with a cardiac pacemaker or implanted cardioverter- Be sure to read the following warnings defibrillator nearby. Warning ...
Page 13 Part Material Surface treatment Stay alert to your surroundings when calling, messaging, browsing the Internet, shooting photos, playing games, Camera lens, light/ Glass AF coating watching TV (1Seg) or listening to music. Failure to do so sensor panel might cause a fall or traffic accident. transparent cover area Do not light the light in front of a person's eyes. Do not gaze microSD memory SUS304 Fingerprint/scratch at the light emitting part when the light is lighted. Doing so card/au Micro IC Card preventive rolling might cause impairment of eyesight, etc. Be especially careful (LTE) slot treatment not to shoot small children from a very close distance. microUSB connection Nonconductive vapor Do not light the light toward a driver of a car, motorbike or terminal cover deposition bicycle. If dazzled by the light, the driver might become unable Side key (power/ Aluminum Anodic oxidation to drive and cause an accident. screen lock key/ treatment Sometimes, very rarely some people demonstrate symptoms volume key) such as temporary muscle spasms, loss of consciousness, Home key/Fingerprint Aluminum Anodic oxidation ...
Page 14 Do not allow liquids, metal objects, burnable items, and other Do not short-circuit the positive (+) and negative (-) terminals foreign matter to get inside au Micro IC Card (LTE) slot and of the battery pack. the microSD memory card slot. Failure to do so might cause Connect the battery pack to the product in the correct fire, electric shock, injury or a fault. orientation. Connecting in an incorrect orientation might cause Do not swing the product around by holding Samsung 1Seg rupture, fire or overheating. Do not try to forcibly connect antenna 01, the Stereo Headset with Microphone (sample), the battery pack, instead thoroughly check the connection etc. Doing so might cause an accident or damage. terminals carefully before connection. If you have a weak heart, be careful when setting the incoming Do not puncture the battery pack with a nail, hit it with vibration and ringtone volume to prevent adverse effects on a hammer or step on it. Doing so might cause ignition or your heart. damage. Pay attention to items becoming stuck to the main unit. The Do not allow metal objects (such as necklaces and hairpins) speaker uses magnets, and so thumbtacks and pins, craft to come in contact with the connection terminals when knife blades, staples, and other metal objects sometimes carrying or storing the battery pack. Doing so might cause become stuck to the main unit, and cause unexpected injury. a fire, overheating, liquid leakage, or a fault due to a short Before using the product, be sure to check that there are no circuit. foreign objects on the speaker or other parts. Do not disassemble, modify or directly solder the battery pack. Do not put the product directly on sand at a beach, etc. Sand or Doing so might cause spilling of the battery liquid resulting in other small particles might get inside the earpiece, microphone an accident such as loss of eyesight if it gets into the eyes, (upper/lower) or speaker, causing the volume to drop. If sand or cause overheating, fire, rupture or injury. gets inside the product's main unit, it might cause overheating Do not use a battery pack that has been dropped, stepped ...
Page 15 The battery pack is a consumable item. If the performance of Do not damage, modify, twist, pull or place a heavy object a battery pack does not recover (e.g. the usable time after on the power cord of the specified charging equipment (sold each charge has become extremely short), the battery pack separately). Do not use a damaged cord. Doing so might is at the end of service life, so stop use and buy a new one of cause an electric shock, short circuit, fire or injury. the specified type. Failure to do so might cause overheating, Do not let your hands, fingers and other parts of the body ignition, rupture or leakage. Note that the length of service life touch the connection terminals. Doing so might cause electric varies depending on the usage condition, etc. shock, injury or a fault. Be careful not to have the battery pack bitten by your pet. It If you hear thunder, do not touch the power plug. Doing so might cause liquid leakage, overheating, rupture, ignition of might cause an electric shock as a result of a lightning strike. the battery pack, fire or injury. Before cleaning the specified charging equipment (sold separately), unplug its power plug from the power outlet or ■ Charging equipment cigarette lighter socket. If the plug remains plugged in when you clean the equipment, it might cause an electric shock or Be sure to read the following warnings short circuit. Warning before use. Wipe off dust on the power plug. Failure to do so might cause fire, burn, or electric shock. Do not use at other voltages than the specified power supply Install and position in-car devices where they do not hinder voltage. Doing so might cause ignition, fire, overheating, driving or safety equipment such as airbags. Failure to do so electric shock or injury. might cause a traffic accident. Install in-car devices following • Desktop Holder (SCL23PUA): 5.0 VDC the instructions of their manuals. • ...
Page 16 If you feel any abnormality with your skin, immediately consult Be sure to read the following cautions Caution a dermatologist. Itching, rashes, eczema, etc. sometimes before use. occurs depending on your physical constitution and condition. The materials of parts used on the Desktop Holder Do not leave the Desktop Holder (SCL23PUA) on the floor. (SCL23PUA) are as follows. Doing so might cause injury or accident if they accidentally Part Material Surface treatment step on the holder or fall. Exterior case − Do not use in humid places such as bath areas, or connect/ Contact terminal Copper Nickel and gold disconnect the specified charging equipment (sold separately) plating with wet hands. Doing so might cause electric shock, injury or Label PET/polyester film − a fault. Bottom rubber Urethane rubber − Attachment (main UV coating Charge the battery in a stable place especially while the unit) vibration mode set. If placed on an inclined surface or wobbly Attachment Neodymium N35H − stand, the product might fall causing injury or damage. In (magnet) addition, do not cover or wrap the product with a cloth or ...
Page 17 ■ Samsung 1Seg antenna 01 Watch your hand or finger when attaching/removing the au Micro IC Card (LTE). May injure your hands or fingers. Be sure to read the following warnings Use only the devices specified by the Company to insert the Warning before use. au Micro IC Card (LTE) in. Using a device not specified by the Company might cause loss of data or a fault. For the specified Samsung 1Seg antenna 01 is not waterproof. Do not use devices, contact an au shop or Customer Service Center. in places subject to direct splashing with water, pet urine or Do not disassemble or modify the au Micro IC Card (LTE). other liquids. Doing so might result in faults resulting from Doing so might cause loss of data or a fault. overheating, fire, electric shock, injury or short-circuiting of Do not use or leave the au Micro IC Card (LTE) in hot places electronic circuits. such as by the fire or a heater. Doing so might cause melting, overheating, fuming, loss of data or a fault. Be sure to read the following cautions Caution Do not throw the au Micro IC Card (LTE) into a fire or heat it. before use. Doing so might cause melting, overheating, fuming, loss of data or a fault. When the product is used by a child, parents or guardians Do not touch the IC (metal) part of the au Micro IC Card (LTE) should teach the child how to use it. Do not allow them to or short-circuit it. Doing so might cause loss of data or a fault. use the equipment without adult supervision. Failure to do so might cause injury. Do not drop the au Micro IC Card (LTE) or subject it to strong impact. Doing so may cause a fault. If you feel any abnormality with your skin, immediately consult a dermatologist. Itching, rashes, eczema, etc. sometimes Do not fold, bend or place a heavy object on the au Micro IC occurs depending on your physical constitution and condition.
Page 18 ■ Stereo Headset with Microphone (sample) If you feel any abnormality with your skin, immediately consult a dermatologist. Itching, rashes, eczema, etc. sometimes Be sure to read the following warnings occurs depending on your physical constitution and condition. Warning The materials of parts used on the Stereo Headset with before use. Microphone (sample) are as follows. Do not use the product for playing game or music while driving Part Material Surface treatment a car or motorbike, riding a bicycle or walking. Doing so may Earphone outer cover UV coating compromise traffic safety and cause an accident. Cable NON PVC − Switch/microphone UV coating Be sure to read the following warnings outer cover Caution before use. Switch Corrosion treatment Earpiece Silicone − When playing game or music, adjust the volume to the Plug (metal) Brass Nickel and gold plating proper level. Setting too loud volume or using the earphone Plug (resin) − continuously for a long period of time might cause hearing ...
Page 19: Handling Precautions
Do not exert a strong force to clean the connection terminals to H andling precautions prevent deformation. These precautions are provided to ensure that performance ● Clean the product with a soft dry cloth (such as the type used can be fully demonstrated. Thoroughly read these for eyeglasses). Forceful rubbing with a dry cloth may scratch precautions to ensure correct use. the display. The display may be stained if splash or smear is left attached to the surface. Wiping the product using alcohol, thinner, ■ Precautions common to the main unit, battery pack, benzine, detergent, etc. might erase the printing on the outer charging equipment, au Micro IC Card (LTE), peripheral casing or cause discoloration. devices ● Use as far away as possible from land-line phones, TVs, radios, etc. ● Do not apply excessive force to the product during use. Be sure Use nearby might affect them. not to put the product into a tightly packed bag or place a heavy ● The product may become warm while charging or during other object on the product in a bag. Sitting on the product in your operations, depending on the situation, but this is not abnormal. pocket might damage the display or internal circuit board resulting ● When the product is used by a child, parents or guardians should in a malfunction. Keeping an external device connected to the thoroughly read this manual or the full "Instruction Manual" (Japanese) microUSB connection terminal or headset connection terminal and teach the child how to use it. might damage the connector resulting in a malfunction. Such ...
Page 20 ● Do not remove the stickers printed with IMEI (International ● Leaving the OLED exposed to the direct sunlight might cause a fault. Mobile Equipment Identity) that can be seen when the battery Take care when you place the product by the window or outside. pack is removed. These stickers prove that the product and the ● Brightness of the display may become dropped because of increasing communication module you are using comply with the Wireless the temperature of the product or decreasing the battery level. Telegraphy Act and Telecommunications Operations Act. ● Take care not to inconvenience people around you when you use the ● Never use modified au cell phones. Use of a modified device product in a public place. violates the Radio Law. The product has acquired the certification of ● You are recommended to store copies of individual data such as conformity with technical regulations for the specified radio station photos you took, videos and music on your PC by sending each based on the Radio Law, and the "Technical Conformity Mark " can file as mail attachment, etc. Note, however, that you may not be be confirmed with the following operations. able to make copies of any copyrighted data even by the above- On the home screen, [Apps] → [Settings] → [About device] → mentioned means. [Regulatory information]. If the screws of the product are removed and modifications are ● Take care not to place magnetized items such as magnetic made to the internal components, the certification of conformity ...
Page 21 ■ Touch Panel to protect the environment and effectively use resources. Old au phones are collected at au shops and other places. ● Use your finger to operate the touch panel. Do not use ballpoint pens, pencils or other sharp-pointed objects. Using such objects ● Insert only a microSD memory card into the memory card slot on does not only hinder correct operation of the touch panel, but also the product. might cause scratching or damage to the display. ● Do not exert excessive force when attaching/removing a microSD ● Do not put stickers or sheets (e.g. commercially available memory card. Doing so might injure your hands or fingers. protective films, peep prevention sheets) on the display. Doing so ● While writing/reading data to/from a microSD memory card, do not might hinder correct operation of the touch panel. subject the product to vibration or impact, remove the battery pack ● Do not operate the touch panel with fingernails. Doing so might or turn off the power. Doing so might cause loss of data or a fault. result in split nails or jammed fingers. ● When hearing the other party's voice, make sure that the earpiece ● If the display surface is dirty or wet with sweat or water, it may not is placed at the center of your ear. If the earpiece (audio output function correctly. In such case, wipe the display surface with a dry, port) is closed by the ear lobe, it may be hard to hear the voice. soft cloth.
Page 22 ■ au Micro IC Card (LTE) ● Do not discard battery packs together with regular trash. Please cooperate in the collection of used battery packs to protect the ● The au Micro IC Card (LTE) is lent to you by au. In case of loss environment and effectively use resources. au shops and other or damage, the card will be replaced at your expense. When a retailers collect used battery packs. malfunction is suspected, or in case of theft or loss, contact an au shop or PiPit. ● Battery packs sometimes swell up as they approach the end of their service life. This is due to the properties of lithium-ion ● Do not forcibly remove or insert the au Micro IC Card (LTE). Be batteries, and is not a problem in terms of safety. careful not to exert excessive force when inserting the card into your au cell phone. ● FeliCa antenna and NFC antenna are embedded in the battery pack. Handle it properly. ● You are responsible for any damage caused by inserting your au Micro IC Card (LTE) into some other IC card reader/writer, etc. ■ Charging equipment ● Keep the IC (metal) part of your au Micro IC Card (LTE) clean. ● When not using the specified charging equipment (sold separately), Wipe the card with a soft dry cloth (such as the type used for remove the plug from the power outlet or cigarette lighter socket. eyeglasses) for cleaning.
Page 23: Available Security Codes
A vailable security codes riding a bicycle may also be punishable by law.) In addition, stay alert to the traffic around you even when walking. Surrounding sounds The product has various security codes that you can use. may not be heard clearly, and gazing at the screen might distract your attention causing a traffic accident. Be especially careful at The available security codes are as follows. Do not forget the railroad crossings, station platform and pedestrian crossings. various security codes that are set as they are necessary for ● Take care not to listen at ear-splitting volume for a long time, as it various operations and contracts. might affect hearing. ● Security code ● Be careful of sound leakage from Stereo Headset with Microphone Example of ① To do remote operation of Voice mail and Call (sample) in trains or other places with many people around you. usage forwarding services from a landline phone ■ Copyrights and rights of portrait ② To use Customer Service Center and to do various inquiries, applications, and modifications on the au ● You are not allowed to copy, distribute, publish, modify or edit the homepage data you shot, recorded or downloaded using this product without Initial value A four-digit number chosen by the customer and noted the consent of the copyright holder, except for personal use, on the application form under the copyright law. In addition, do not use or modify portraits ● Pattern/PIN/password to unlock screen or names of other individuals without their consent, as it might infringe on rights of portrait.
Page 24: Pin Code
PIN Code ■ PIN Code To prevent unauthorized use of the au Micro IC Card (LTE) by a third party, you can set the product to require PIN code entry every time the power is turned on. You also need to enter PIN code when setting whether the PIN code entry is required. If the PIN code is incorrectly entered three times consecutively, the PIN code will be locked. Use the PUK code to unlock the PIN code. • PIN code is "1234" and PIN code entry was set to not be required at the time of purchase. You can change PIN code to any four- to eight-digit number, and set the PIN code entry to be required as necessary. ■ P UK Code In case the PIN code is locked, you can unlock it by entering the PUK code. • PUK code is an eight-digit number given at the time of purchase, which is printed on the back side of the plastic card where your au Micro IC Card (LTE) is attached. • After entering the PUK code, you need to set a new PIN code. • If the PUK code is incorrectly entered ten times consecutively, contact an au shop, PiPit or the Customer Service Center. • "PIN code" is not reset by initializing the product.
Page 25: Notes On Waterproof And Dustproof Properties
● Be sure to tightly close the microUSB connection terminal cover properties and securely attach the back cover. • Waterproofness/dustproofness is only effective when the covers This product has a waterproof property equivalent to IPX5 are securely closed. and IPX7 , as well as a dustproof property equivalent to • Just a small particle (a hair, one grain of sand, etc.) between IP6X on the condition that the microUSB connection contact surfaces can cause water leak. terminal cover and back cover are securely attached (based • Do not open/close the microUSB connection terminal cover or back cover if the main unit or your hands are wet. When the water on in-house testing). is in the headset connection terminal, do not insert Samsung Specifically, you can make calls holding the product with wet 1Seg antenna 01, Stereo Headset with Microphone (sample), hands in the rain (less than 20 mm per hour) without umbrella, etc. as well as use the product in a place with water such as a Closing microUSB connection terminal cover kitchen. After stowing the cover hinge, press the whole cover evenly with Before using the product, thoroughly read "Important items to the ﬂat part of your ﬁnger. Ensure that the cover is not partially open. remember before use" and "Tips for comfortable use" to ensure correct use. Failure to follow the contents described in these sections may cause the intrusion of water, sand or other foreign material, resulting in overheating, ignition, electric shock, injury or a fault. *1 IPX5 equivalent means that the product will maintain its operability as a phone ...
Page 26 ● Drain water if it becomes temporarily hard to hear the sound due to Attaching the back cover water remaining in microphone. Check the orientation of the back cover and attach it ﬁtting to the ■ Notes on various usage scenes out-camera, then press ﬁrmly and install making sure there are no gaps. < In the rain> You can make calls holding the product with wet hands in the rain without an umbrella. • The rain in this case means a moderately-heavy rain (less than 20 mm per hour). • Water drops on the display might cause errors in the touch panel operation. Press ﬁrmly and make sure there no gaps between the cover and • Never open/close the microUSB connection terminal cover or back the main unit. cover if the product is exposed to rain, or your hands are wet. <In the shower> ● Do not immerse the product in water with soap, detergent or bath salts in it. You can make calls holding the product with wet hands while taking a ● Do not immerse the product in seawater, a swimming pool or hot spring. shower. ● Do not immerse the product in any liquid (alcohol, etc.) other than water. • Avoid spraying the product with high-pressure water, as the ● Do not place the product directly on the sand at a beach, etc. Sand or product is not designed to withstand high water pressure. other small particles might get inside the earpiece, speaker, etc. causing <Washing> the volume to drop. If sand gets inside the product's main unit, it might ...
Page 27 <On the poolside> cover and the microUSB connection terminal cover so that they do • Do not immerse the product in or splash it with pool water. Also, do not open. Do not use a brush or sponge. not use the product underwater. After the product gets wet • When the product gets pool water, which contains chlorine for After the product gets wet, drain water, and wipe the main unit and disinfection, wash the product under the tap water* at room the back cover with a clean dry cloth without removing the back cover. temperature. Do not use brush etc. when washing it. In cold climates, water on the main unit may turn to frost. Using the *1 A mild flow (6 liters per minute or less) product with frost may cause a fault. Do not leave the product without <In the kitchen> wiping off the water. (No special measures against condensation have You can use the product in the kitchen and other places where water been implemented in this product.) is used. Rubber seals • Do not splash the product with or immerse it in soap water, The rubber seals on the inner edges of the microUSB connection detergent water, seasonings, juices, etc. other than tap water. terminal cover and the back cover are important to maintain • Do not immerse the product in or splash it with boiling water. The waterproof/dustproof property. Do not damage or remove the rubber product is not resistant to high temperatures. seals. • Do not place the product where it gets extremely hot or cold such When closing the microUSB connection terminal cover and back as near a stove or in a refrigerator. cover, take care not to get the rubber seals caught. Forcibly closing • To watch TV (1Seg), place the product on the stable place. the cover with the rubber seals caught may damage them resulting in ...
Page 28 from a faucet or showerhead, at which you might even feel pain in the * When shaking the product, check the safety around you. skin). Doing so might cause a fault, even though the product has a * Be careful not to have the product pop out, and hold it firmly to waterproof property equivalent to IPX5. Do not wash the product in a drain water. washing machine or ultrasound bath. The product does not float on * Water left on microphone, speaker, microUSB connection water. terminal, charging terminals or headset connection terminal is not easily wiped off. Shake the product with these parts facing Heat resistance downward. Do not use the product in places where boiling water may splash on it, Press the product in saunas or near hot air (e.g. hairdryer). The product is not resistant to high temperatures. gently against a Shock clean dry lint-free This product is not resistant to shock. Do not drop the product or cloth, and wipe off subject it to shock. Also, do not jab the microphone, or speaker etc. water coming out with a cotton swab or any sharp object. Failure to do so might cause of parts such as damage or a fault. the microphone, ■ Draining water after wetting the product speaker, microUSB As some parts of this product are not watertight, if you use the connection product after it gets wet, water remaining in those parts might wet terminal or headset your clothes or bag, or the sound might become hard to hear. Follow ...
Page 29 ■ Charging The supplied and optional accessories are not waterproof/dustproof. Be sure to check the following points before and after charging. • Never charge the battery if the product is wet. Doing so might cause electric shock or short circuit resulting in a fire, burns or a fault. • Check that the main unit is not wet. If you are charging the battery just after the product gets wet, drain water well and wipe the remaining water off with a clean dry cloth before placing it in the Desktop Holder (SCL23PUA) or opening the microUSB connection terminal cover. • If you charge the battery with the microUSB connection terminal cover open, be sure to tightly close the cover when charging is finished. We recommend using the Desktop Holder (SCL23PUA) to charge the battery to prevent water from entering from the microUSB connection terminal cover. • Do not touch the specified charging equipment (sold separately) with wet hands. Doing so might cause electric shock. • Do not splash water over the specified charging equipment (sold separately) or Desktop Holder (SCL23PUA). Do not use it near water such as in a bathroom, shower room, kitchen or washroom. Doing so might cause fire, electric shock, injury or a fault. Do not bring it into a bathroom, etc. even when you are not charging with them. Doing so might cause fire, electric shock, injury or a fault.
Page 30: Notes On Using Bluetooth /Wireless Lan (Wi-Fi ) Functions
® • The wireless LAN (Wi-Fi ) function cannot be used in ® Notes on using Bluetooth /wireless airplane. Be sure to turn off the power even in a wireless ® LAN (Wi-Fi ) functions ® LAN (Wi-Fi ) compliant airplane. Some airline companies, however, allow their passengers to use cell phones. For • The Bluetooth ® function and wireless LAN (Wi-Fi ® ) function details, contact the airline company you use. of this product conform to the domestic standards of • The communication speed and connectable range vary Japan, FCC standards and EC Declaration, and have been depending on the distance between communication certified. ® devices, obstacles and the Bluetooth devices used. • Use the wireless LAN (Wi-Fi ® ) function in the 5 GHz band ® in Japan. The wireless LAN (Wi-Fi ) function of this product ■ 2.4 GHz frequency band precautions conforms to domestic wireless standards in Japan, and ® The frequencies used by the Bluetooth and/or wireless LAN has been certified. Use overseas may be subject to (Wi-Fi ®...
Page 31 ® ® 2. In the event that instances of radio wave interference Bluetooth and wireless LAN (Wi-Fi ) functions of this product have occurred between this product and "other wireless use frequencies in the 2.4 GHz band. ® • Bluetooth function: 2.4FH1/XX8 stations", immediately either relocate this product or This product uses the 2.4 GHz band. For stop operation of the device (stop the emission of radio FH1, FH-SS is used as the modulation waves). scheme. The interference distance is about 3. If you are unclear on any points or are troubled by 10 m or less. XX8 uses other schemes and anything, contact an au shop or Customer Service interference distance is about 80 m or less. Center. ® • Wireless LAN (Wi-Fi ) function: 2.4DS/OF4 This product uses the 2.4 GHz band. DS- SS and OFDM are used as the modulation schemes. The interference distance is ◎ The connections between this product and all other Bluetooth ® about 40 m or less. and wireless LAN (Wi-Fi ® ) devices have not been confirmed. ： T his means that all bandwidths can be used, and that ®...
Page 32: Notes On Packet Communication Charge
• Some applications prohibit the product from entering sleep Notes on packet communication mode while they are active, or rapidly drain the battery charge while running in the background. • Operational procedures and screen appearances of • Since a constant Internet connection is possible with the applications preinstalled in this product and those this product, packet communication may be performed installed by you are subject to change without notice as a automatically by some applications, resulting in high result of version upgrade. In addition, operating procedures packet communication charges. Therefore, subscription to described in this manual may differ from the actual a packet communication charge discount service or flat procedures. late plan is recommended. • To browse homepages, download applications, communicate using applications, send/receive E-mails and configure various settings, connection to the Internet is required, to which packet communication charge applies. * Packet communication charge does not apply to Wi-Fi connection. Notes on applications • Be sure to check the security of the application, then install it at your own risk. Some applications might cause virus infection, damage various data, and send out your location information, usage history or personal information stored in your cell phone via the Internet. • The Company assumes no responsibility for any problems that might be caused by the applications you have installed. In such case, you may be charged a repair fee even during the warranty period. • The Company assumes no responsibility for any disadvantage brought to you or any third party by applications you have installed. • Insertion of a microSD memory card is necessary to use some applications.
Page 33: Getting Ready
Getting ready Names of parts and their functions...
Page 34 a Light-emitting part for remote control k C harging terminal (for Desktop Holder) l x Back key When using remote control function in "Smart Remote" application etc., aim this part at a receiver. End applications or return to the previous screen. b Notification LED m microUSB connection terminal n microUSB connection terminal cover Notify missed calls, indicate charging status, etc. only o Headset connection terminal while the display backlight is turned off. c E arpiece Connection terminal with 3.5 mm diameter for connecting Other party's voice is heard. Stereo Headset with Microphone (sample), etc. d D isplay (Touch panel) p G PS/Built-in antenna part* ...
Page 35: Attaching/Removing The Battery Pack
mark A ttaching the b attery pack Hold the mark over the reader/writer when using Osaifu- Put your finger (fingernail) into the part -① ® Keitai Send or receive data via IC transmission. and lift the back cover in the direction of B B uilt-in antenna part* -② then remove in the direction of -③ C microSD memory card slot D au Micro IC Card (LTE) slot *1 Be careful not to cover microphones (upper/lower) with your finger. *2 Do not cover proximity/light/gesture sensor with a protective sheet, etc. Functions may not work correctly. *3 The antenna is built into the phone. Covering around the antenna by hand may affect call/communication quality. Attaching/removing the battery pack Fit the projections of the product with Use only the battery specified for this product and attach grooves of battery pack ( -①), then insert correctly. the battery pack in the direction of ...
Page 36: Removing The Battery Pack
Removing the battery pack Check the orientation of the back cover, align the back cover with the out-camera Remove the back cover position, and then press it firmly to ensure Put your finger on the battery pack using that there are no gaps the groove of the product and lift the battery pack in the direction of the arrow to remove Groove Press parts marked by ﬁrmly and make sure that there are no gaps between the cover and the main unit. a u Micro IC Card (LTE) ◎ Attaching in the wrong way may damage the battery pack and cover. Your phone number etc. is recorded ◎ When attaching the back cover, align properly and push along in the au Micro IC Card (LTE). au Micro IC Card (LTE) the edges not to leave spaces between the cover and the • The product is compliant with phone. (Front au Micro IC Card (LTE) only. side) You cannot use the product IC (metal) part by inserting the au IC-Card and (Back micro au IC-Card for au phones side) and smartphones instead.
Page 37: Attaching The Au Micro Ic Card (Lte)
au Micro IC Card (LTE) ◎ Power off the product and remove the battery pack before slot attaching/removing the au Micro IC Card (LTE). ◎ Note the following points, otherwise handling the au Micro IC Card (LTE) may cause malfunction or damage. • Do not touch the IC (metal) part of the au Micro IC Card (LTE) Notch or the IC card terminal inside the product. • Insert in the correct direction. • Do not use force to attach or remove. ◎ Do not lose the au Micro IC Card (LTE) after it has been Removing the au Micro IC Card (LTE) removed. ◎ If an au Micro IC Card (LTE) is not inserted, appears. And the following operations cannot be performed. Remove the battery pack and cover - Making/receiving calls Pull the au Micro IC Card (LTE) straight out - Sending/receiving E-mail (@ezweb.ne.jp) and SMS - Setting PIN code - Checking own number - Making emergency calls to 110 (Police), 119 (Fire institution), 118 (Regional Coast Guard Headquarters) and 157 (Customer Service Center) ◎ Do not insert an au Nano IC Card (LTE) to which a conversion adapter is attached. Doing so might cause a fault. Attaching the au Micro IC Card (LTE) ...
Page 38: Charging
Charging using the AC adapter (sold separately) C harging The following describes how to charge the battery pack When you purchase your product, the battery pack is not fully using the common AC Adapter 05 (sold separately). charged. Be sure to charge the battery pack before use. • "Charging, XX%" appears under the date and time on the It takes about 100 minutes to charge the battery pack lock screen when charging. with the common AC Adapter 05 (sold separately). With the engraved side up, insert the microUSB plug of the common AC Adapter 05 USB 3.0 cable (sold separately) straight into the microUSB (commercially available) connection terminal (wider terminal on the right side) of the product Common AC adapter 05(sold separately) Insert the power plug of the common AC microUSB plug To AC 100 V Adapter 05 (sold separately) into the AC outlet 100 V outlet Start charging tone sounds and appears on the status bar. When charging is finished, appears on the status bar. * You cannot charge using both the • When you start charging powered off, animation is specified AC adapter (sold separately) and a PC at the same time displayed to show the status of charging in a certain ...
Page 39: Charging With A Pc
Charging with a PC Charging with Desktop Holder (SCL23PUA) and specified AC Adapter (sold separately) To charge with a PC, the microUSB connection cable (sample) is needed. Make sure the direction to connect them properly. Desktop Holder (SCL23PUA) and specified AC Adapter (sold Attempting to forcibly connect may cause a damage. separately) are required for charging. Charging with Common AC Adapter 05 (sold separately) is explained. With the engraved side up, insert the AC 100 V microUSB plug of the microUSB connection outlet cable (sample) straight into the microUSB connection terminal of the product Contact terminal Insert USB plug of the microUSB connection Common AC Adapter 05 cable (sample) into the USB port of a PC (sold separately) microUSB appears on the status bar. plug When charging is finished, appears on the status bar. microUSB • If the found new hardware screen etc. appears on the PC, connection terminal select "キャンセル (Cancel)". When charging is finished, remove the Connect the microUSB plug of Common AC Adapter microUSB connection cable (sample) from the 05 (sold separately) with the microUSB connection ...
Page 40 When charging is finished, remove the product from Desktop ■ Attachment Holder (SCL23PUA) by lifting straight. Removing the By default, an attachment (Samsung S View cover adjusting product tilting forward may cause damage. attachment) is attached to Desktop Holder (SCL23PUA). Usually, charge with Desktop Holder (SCL23PUA) with the attachment installed. ◎ Desktop Holder (SCL23PUA) does not support quick charge. If you remove the attachment, you can charge the product ◎ When you connect USB cable from the external connection with Samsung S View cover attached. To remove, slide the terminal of the product while attaching the product to Desktop attachment upward. Holder (SCL23PUA) to charge, charging from the external connection terminal is given a priority. To attach the attachment, fit and install the projections ◎ When you attach the product to the desktop holder and the of the attachment into the grooves of mounting portion of product is turned on, the desktop home screen with a calendar, Desktop Holder (SCL23PUA), and press firmly so that there a clock, etc. is displayed. are no gaps between Desktop Holder (SCL23PUA) and the ◎ When you connect Desktop Holder (SCL23PUA) with a PC using microUSB cable 01 (sold separately), data cannot be attachment. transferred between the product attached to Desktop Holder • Note that charging is not available when a commercially (SCL23PUA) and the PC. available cover other than Samsung S View cover is attached. S View cover adjusting attachment Projection Groove...
Page 41: Turning The Power On/Off
T urning the p ower on/off ◎ We recommend attaching the removed attachment to the Turning the power on bottom of Desktop Holder (SCL23PUA) to prevent loss. Fit and install the projections of the attachment into the grooves of the Press and hold (over one second) bottom of Desktop Holder (SCL23PUA). The lock screen is displayed. Groove ■ Initial settings and switching to English mode The first time the product turns ON, the initial setting screen appears automatically. Follow the onscreen instructions to switch to English mode. For details, refer to the supplied "Setting Guide". ◎ To change language to use, on the home screen, tap [Apps] → [Settings] → [Language and input] → [Language] → Select language you want to use. Turning the power off Press and hold (over one second) Device options screen is displayed. [Power off] → [OK] Force restarting Press and hold y and lower side of volume key simultaneously for over 11 seconds The product vibrates twice and restarts.
Page 42: Setting The Screen Lock
S etting the screen lock Setting a u ID If the screen lock is set, the screen backlight turns off to When you have created an au ID, you can use various au prevent the keys or touch panel from erroneous operation. services including "au Simple Payment Service" which offers If no operation is made during certain period of time, the you a simple way to purchase applications from au Smart screen of the product automatically turns off and is locked Pass and Google Play. in approximately five seconds. On the home screen, [Apps] → [au ID Setting] While the screen is displayed, Enter the security code → [OK] → [au IDの設 Backlight turns off and screen lock activates. 定・保存 (Set/Register au ID)] Press /y to turn the backlight on and display lock screen. Follow the onscreen instructions to set your au ID Canceling the screen lock If you already have an au ID, set your au ID. The lock screen appears when the power is turned on or backlight is turned on by pressing While the screen is locked, Flick (swipe) the screen up/down/left/right S etting up a Google account on your product To use Google services such as Gmail and Google Play, set ...
Page 43: Basic Operation
■ S lide ■ F lick ( S wipe) Basic operation While your finger is gently Operate the screen by touching the screen, trace quickly moving (flicking) your it to the desired direction to finger up, down, right, or left. Using the t ouch panel move over. The display on the product is a touch panel operated by touching it with your finger. • The touch panel is designed to be touched lightly by your finger. Do not exert too much pressure with your finger, or press sharp-pointed objects (fingernails, ballpoint pens, pins, etc.) against it. • In the following cases, the touch panel may not work even if you touch it. It may also malfunction. ■ P inch ■ D rag ･ Operation with your fingernails ･ Operation with foreign objects placed on the operation pad Touch the screen with two Keep touching an item or ･ Operation with protective sheets or stickers on the fingers and widen (pinch icon, trace it to the desired ...
Page 44: Motion/Gesture
■ D irect call Motion/Gesture When detailed screen of history or detailed screen of Moving your hand over the proximity/light/gesture sensor contact is displayed, pick up the product and bring it close of the product (gesture), moving the product (motion), or to your face then the product vibrates and you can call to swiping or tapping operation on the display performs the the contact. following operations. • Activate motion/gesture before using. From the Home screen, [Apps] → [Settings] → [Motions and gestures] → Tap motion/gesture you want to use → Tap to • Tap item list of motion/gesture to use, to show tutorial of each motion, to check the instruction, and/or to set application and function to use. * This function maybe unavailable on some applications. ■ B rowse On the email message screen, move your hand up and down over the sensor to scroll the screen. By moving your hand left or right over the sensor, go to ■ S mart alert next or previous data when still images or music are being If you pick up the product when there are missed calls and played on specified application and move to next or previous the screen turns off, the product vibrates to notify. window while browsing.
Page 45 ■ M ute/Pause ■ Smart pause Detect face with inside camera and pause playback of video ■ Covering screen with hand when you do not watch the screen. While ringtone or alarm is sounding, tap with your palm to mute. While playing music or video, tap with your palm to pause playback sound (except when display is OFF). ■ C apture screen Swipe the screen from right to left or vice versa with the side of your hand to capture the displayed screen. ■ Turning down the product While ringtone or alarm is sounding, turn down the product to mute. While playing music or video, turn down the product to pause playback sound (except when display is OFF). ◎ If you wear dark colored glove or perform gesture operation out of the sensor recognition range, Gesture may not function correctly because of characteristics of sensor. ◎ If excessive movement (shakiness, impact, etc) is given to the product, Motion may not function correctly because of sensor characteristic.
Page 46: S Preview
S Preview Display preview to show information (information preview) out of ◎ Keep certain distance between your finger and the display while operating S Preview. Putting your finger away form the display the display by putting your finger close to text or image. You can during S Preview operation disables the operation. also display time information of the scene and frame by putting ◎ When your finger is too close to the display during S Preview your finger close to progress bar during playing videos, etc. Put operation, it might be recognized as touch operation. your finger close to number on keypad screen to show name of set speed dial. • This function maybe unavailable on some applications. • Activate S Preview before using. On the home screen, [Apps] → [Settings] → [S Preview] → Tap of "S Preview" to turn to • Tap preview to use to show tutorial of each preview. 《Example of information preview》...
Page 47: Using The Home Screen
Starting an application Using the h ome screen Tap an icon displayed on the applications screen to activate The home screen consists of multiple screens that can be an application. switched by flicking left or right. You can return to the home • Some applications and functions require communication screen at any time by pressing y. charge. ■ Displaying the applications screen On the home screen, [Apps] Applications screen appears. • Flicking from side to side toggles applications screen. ① Widgets Tap to activate or operate. ② Shortcuts Tap to activate applications or functions. ③ Home screen guide Indicates which screen you are in. ④ Quick access panel Tap to activate applications or functions. Tap "Apps" to show the applications screen.
Page 48: Monitoring The Product's Status
Icon Overview Monitoring the product's status Uploading data/Data uploaded Icons indicating the status of the product appear in the Alarm is sounding status bar at the top of the screen. At the left of the status S Planner notification bar, notification icons indicating missed calls, new mail, / Playing/Pausing music in the background running actions, etc. and at the right of the status bar, microSD memory card in preparation status icons indicating the status of the product appear microSD memory card is unmounted. respectively. USB connecting Status bar Error messages Google Play update notification for installed applications Application installed Understanding i cons Software update setting/Set Software update ■ Main notification icons ® ® Wi-Fi is turned on and Wi-Fi open network is available Icon Overview GPS positioning in process (animating)/ Call is received/Dialing/Calling in the background Positioning complete (stop animating) Missed call Nearby devices turned on New Gmail message Navigation activated New PC-mail message...
Page 49 Icon Overview Icon Overview Blocking mode set NFC function enabled Drive mode set NFC/Osaifu-Keitai lock set Screen shot setting enabled Smart stay activated ■ M ain status icons Icon Overview / Signal strength level 4/ out of range Signal strength (international roaming) / LTE data communication status LTE data communication available/ LTE data communication in process / 3G data communication status 3G data communication available/ 3G data communication in process / 1X data communication status CDMA 1X data communication available/ CDMA 1X in process / Wireless LAN (Wi-Fi ® ) communication status ® Wireless LAN (Wi-Fi ) available/ ...
Page 50: Notification Panel
a T ap to show setting screen for date and time. N otification panel b S witch on/off of each function (Quick Settings Button). When a notification icon appears, you can open the Drag from side to side or tap , to show hidden icons. Notification panel to check overview of the notification. Tap Long touch to show setting menu screen for each icon on the Notification panel to set functions or check the function. information notified. c D isplay S finder. d Set display brightness. Slide down the status bar e Display notification information such as missed calls, new arrival mails, information in progress or process, etc. Flick left or right to delete. f Network operator currently connected is shown. • Slide up to close the Notification panel. g Show Settings menu. h Quick connection display appears. i Clear notification information.
Page 51: Using Fingerprint Authentication Function
■ To use in operation for authentication to Samsung Using f ingerprint authentication account function [Verify Samsung account] Fingerprint authentication function is an authentication by sliding your finger over the fingerprint sensor. Using Tap on [Verify Samsung account] → fingerprint authentication function, you can easily unlock [OK] → Follow the onscreen instructions to Lock screen and authenticate Samsung account. operate Setting fingerprint authentication ■ To use as an authentication method for paying with PayPal function [Pay with PayPal] → Follow the onscreen You can register fingerprint and set up functions to use or instructions an alternative password. • F or settings of unlocking lock screen, refer to "Screen lock ■ To change alternative password authentication" (▶P.68). [Change alternative password] → Enter • If "Disclaimer" screen appears, confirm the contents and current alternative password → [Continue] follow the onscreen instructions. From the Home screen, [Apps] → [Settings] → → Enter a new alternative password → [Finger Scanner] [Continue] →Enter the new alternative ...
Page 52: Character Input
C haracter input Use the software keyboard to enter characters. To display the software keyboard, tap a character input box in the character entry screen for adding contacts, creating a message, etc. Samsung Japanese keypad is set by default. "Google voice typing" function is also available to input character. S witching the keyboard While the keyboard is displayed, slide down the status bar Notification panel is displayed. [Choose input method] → Choose input method you want to use Entering text with Samsung Japanese keypad For Samsung Japanese keypad, you can use two types of keypads: "QWERTY" and "3x4 key". ■ Switching the keypads While the keypad is displayed, [ ] [3x4 Keyboard⇔QWERTY Keyboard] [3x4 Keyboard]/[QWERTY Keyboard] → [OK]...
Page 53: Phone
U sing history to make a call P hone On the logs, history of outgoing calls, incoming calls, missed calls, rejected calls can be checked. On the home screen, [Phone] M aking calls → "Logs" tab On the home screen, [Phone] → "Keypad" tab The Logs screen is displayed. : Incoming calls Enter the phone number of the other party : Outgoing calls To call a landline phone, first input the city code, even if you : Missed calls are in that city. : Reject calls • If you input wrong number, tap to delete the number : Calls on the auto reject list you input. Select a party you want to call Long touch to delete the all the numbers you input. Detailed log screen appears. [ ] ...
Page 54: Calling Overseas From Au Phones (Au International Call Service)
Calling overseas from au phones ( a u I nternational Call Service) ◎ In this section, the police (110), fire station (119) and Regional Coast Guard Headquarters (118) are collectively referred to as You can make international calls without any special procedure the emergency call receiving agency. from your product. ◎ This feature may not yet be available at some emergency call Example: To call "212-123-XXXX" in America from your receiving agencies. product ◎ If you add "184" before the emergency call number 110/119/118, the emergency call receiving agency will not be On the home screen, [Phone] → "Keypad" notified of your location and phone number. ◎ In places where signal reception from GPS satellites or a base tab → Enter the access code, country code, station is relatively poor, such as in an underground mall, inside city code, and the phone number of the other a building or behind a tall building, the emergency call receiving party → [ ] agency may be notified of some other place different from your actual location. Access code varies depending on the country you call to. ◎ When GPS cannot be used to notify of your location, base station signal is used instead. Access Country code Phone number of City code ◎ When making an emergency call to the police, fire station or code (America) ➡ the other party ➡...
Page 55: Receiving Calls
R eceiving calls You have an incoming call Drag or slide out of the circle • To decline a call, drag or slide out of the circle. Checking your phone number On the home screen, [Apps] → [Settings] → [About device] → [Status] Your phone number is shown in the "My phone number" field.
Page 56: Mail
Creating and sending E-mail M ail On the home screen, [E-mail] → [Compose] Address entry screen appears. You can use the following types of mail on the product. ･ E-mail (@ezweb.ne.jp) [ ] ･ SMS Alternatively, tap "Enter address" to directly enter an address. ･ PC-mail Select quoting option ･ Gmail [Compose] Using E -mail Message thread screen appears. This service allows you to exchange E-mail (@ezweb.ne.jp) Tap subject entry field → Enter subject with cell phones and PCs corresponding E-mail. You can send text, still images, and video data. Tap the message field → Enter message text • To use E-mail, set up E-mail address in advance. Follow the [ ] → [Send] onscreen instructions to set up when you activate E-mail application for the first time. For details, refer to the supplied "Setting Guide". • To use E-mail functions, subscription to LTE NET is ◎ Decoration anime is not supported.
Page 57: Changing Address
C hanging address Using S MS On the home screen, [E-mail] → Long touch SMS is a service that uses phone numbers as addresses to t → [E-mail settings] exchange messages between cell phones. [Other settings] → [接続する (Connect)] Creating and sending an SMS [Eメールアドレスの変更へ (To Change E-mail You can send a message (text of mail) using kanji, hiragana, address)] → Tap password entry field → katakana, alphanumerics, symbols, smileys, and emoticons. Enter a password → [送信 (Send)] On the home screen, [Apps] → [SMS] Thread list by other party appears. [承諾する (Agree)] [ ] Tap E-mail address entry field → Enter the SMS creating screen appears. part of the address preceding "@" [Input Phone No.] → Enter other party's phone → [送信 (Send)] → [OK] number Alternatively, [ ] → Select other party from Contacts. [Input text] → Input text You can send up to 160 single-byte or 70 double-byte ...
Page 58: Receiving Sms
Receiving SMS Using G mail Receive SMS Gmail is a mail service provided by Google. You can check, appears in the status bar and the incoming tone sounds. send and receive Gmail from the product. • You need to set up a Google account beforehand to use On the home screen, [Apps] → [SMS] Gmail. appears on the thread which includes unread SMS. Tap the thread to check Creating and sending Gmail Message thread screen including received SMS appears. On the home screen, [Apps] → [Gmail] [ ] ◎ There is no charge for receiving SMS. ◎ Depending on their content, some SMS may not be displayed [To] → Input the other party's mail address correctly. [Subject] → Input the subject Using PC-mail [Compose email] → Input a message Using "Mail" application, you can exchange mails on this [ ] product by setting the same mail account as used on your Receiving Gmail ･ You need to set up a PC-mail account beforehand to use ...
Page 59: Internet
Using bookmarks/history Internet You can check history or save bookmarks. You can connect to the I nternet using packet Browser screen → [ ] ® communication or wireless LAN (Wi-Fi ) function. Tap bookmark/history to open Using a b rowser ■ Storing Bookmarks You can use a browser to view web pages just as you can Browser screen → [ ] on a computer. ［ +］ Displaying a web page Check/Edit title • To change folder to save the bookmark, tap "My device" On the home screen, [Internet] field → Select a folder to save. Browser screen appears. [Save] Tap address bar at the top of the screen → [×] Search or enter Web address field appears.
Page 60: Applications
Registering your p rofile A pplications Contact screen → [Set my profile] Profile screen appears. Using C ontacts Enter required items → [Save] You can see the contacts information on the contacts list Editing contacts screen of Contacts. You can also add pictures to contacts. Contact screen → Tap a contact you want to edit ◎ Phone numbers and names saved in the contact may be lost due to an accident or malfunction. It is recommended that you [ ] take a copy of important phone numbers etc. We shall not be liable for the damage and lost profit in the case that the contact S hooting with the c amera is changed or lost because of an accident or malfunction. You can shoot still pictures or record videos using the R egistering a contact "Camera" application. Shooting/Recording is available in horizontal or vertical screen by tilting the product. ...
Page 61: Understanding The Shooting Screen
f Storage location (microSD memory card) • Placing the product on an unstable surface when Indicate that the microSD memory card is set as storage performing Self Timer shooting can cause it to fall when location. a vibrator operation or other operation is triggered by an g S hutter (for videos) incoming call, etc. h Shutter (for still pictures) • The focus-lock sound and shutter sound when taking still i Shooting mode menu pictures, and the record start sound and record end sound j P review image when recording videos are always produced even in silent Thumbnail of still images/videos shot right before mode. appears. Tap to open preview screen. Understanding the shooting screen S hooting s till pictures The horizontal screen view is used for explanation purpose. On the home screen, [Camera] On the home screen → [Camera] Point the camera at the subject Icons in the default state are shown. • ...
Page 62: Shooting Video
S hooting v ideo G allery On the home screen, [Apps] → [Camera] You can view still pictures and videos saved on the product or microSD memory card and sort them. Supported file Point the camera at the subject → [ ] formats are as follows (some files cannot be played); Start sound is emitted and recording starts. Still picture JPEG, PNG, GIF, AGIF, BMP, WBMP • Pinch the screen to adjust zoom (x1.0 up to approximately Video MP4, M4V, 3GP, 3G2, WMV, ASF, AVI, FLV, x4.0). However, depending on shooting mode, zoom may MKV, WEBM, TS be unavailable. • Tap to pause recording. To stop shooting, [ ] ◎ This product is not compatible with DivX. Download compatible Stop sound is emitted and recorded video is automatically application to play files in DivX format. saved. On the home screen, [Apps] → [Gallery] Data list screen appears.
Page 63: Au災害対策 (Au Disaster Countermeasure)
au災害対策 (au Disaster Countermeasure) au災害対策 (au Disaster Countermeasure) is an application ◎ To register information of well-being, E-mail address (ezweb. ne.jp) is required. Set up E-mail address beforehand. For details in which you can use Disaster Message Board, Emergency on E-mail address setup, refer to "Setting Guide" available on au Rapid Mail (Earthquake Early Warning and Disaster and homepage. evacuation Information and Tsunami Warning) and Disaster ◎ Clearing and changing setting of 安否お知らせメール (safety ® Voice Messaging Service. notification mail) is unavailable while Wireless LAN (Wi-Fi ) is connected. On the home screen, [Apps] → [au災害対策 (au ◎ The Company makes no guarantees about the service quality. Disaster Countermeasure)] The Company assumes no responsibility whatsoever for any damages suffered by customers resulting from failure au災害対策 (au Disaster Countermeasure) screen appears. in registering information of well-being due to the number of accesses or equipment failure, damage or loss of information of Using Disaster Message Board well-being, or registered information of well-being. Disaster Message Board service enables you to register Using Emergency Rapid Mail information of well-being from an area of distress via LTE NET in case of large-scale disaster such as earthquake with Emergency Rapid Mail is a service that distributes a seismic intensity of over 6 lower. Registered information Earthquake Early Warning or Tsunami Warning delivered can be viewed on any cell phones and PCs besides by au from the meteorological bureau or Disaster and evacuation cell phone users. Information delivered from the government or local public For details, refer to "Disaster Message Board" of au organization to all au cell phones in specified areas homepage. simultaneously.
Page 64 削除(Delete) Delete received mail. 設定受信設定緊急地震速報 (Earthquake ◎ Reception of Emergency Rapid Mail is notified by a special warning (Settings) (Reception Early Warning): Set whether tone and vibration. It is not possible to change the warning tone. setting) to receive Earthquake Early * Reception of Earthquake Early Warning is notified by a special warning tone, Warning. voice ("Jishindesu (It is an earthquake)") and vibration. 災害・避難情報 (Disaster and ◎ Earthquake Early Warning are sent to areas where strong quakes evacuation Information): (over 4 degrees) are expected when the expected maximum Set whether to receive seismic intensity is higher than lower 5. Disaster and evacuation ◎ The Earthquake Early Warning system provides advance Information and Tsunami announcement of the estimated seismic intensities and expected Warning. arrival time of principal motion. These estimations are based on prompt analysis of the focus and magnitude of the earthquake 通知設定音量 (Volume): Set volume using wave form data observed by seismographs near the (Notification of ringtone. epicenter. setting) バイブ (Vibration): Set ◎ Earthquake Early Warning may not arrive before strong tremors in ...
Page 65: Using Disaster Voice Messaging Service
■ Receiving voice ◎ Emergency Rapid Mail may not be received when your cell phone is Reception of voice message is notified pop-up screen or communicating such as while sending/receiving SMS/mail or using the browser, or if you are in a place where signal does not reach SMS. Receive (download) the voice message to play. even in the service area (e.g. in a tunnel, basement) or in a place * If the recipient's device is a smartphone that has not launched "au災害対策 (au with a poor reception. Disaster Countermeasure)" application supporting Disaster Voice Messaging ◎ You cannot receive Emergency Rapid Mail that the reception is Service or au cell phone, notifications are sent by SMS. * Notifications made by SMS are not saved to au Disaster Countermeasure failed. application. ◎ This delivery system is different from Earthquake Early Warning provided through TV, radio, or other communication procedures, which means that the time the Earthquake Early Warning arrive may vary. ® ◎ To use via Wi-Fi , initial setting via 4G (LTE)/3G network is required. ◎ Information from someplace other than your current location may ◎ Voice message can be recorded for up to 30 seconds. be received. ◎ Messages can be sent and received to or from au cell phones, other telephone company s phones or PHS phones. ◎ Voice message may be difficult to hear if the media volume is low Using Disaster Voice Messaging Service or silent mode is set. ◎ Voice messages cannot be saved or played if the device memory Disaster Voice Messaging Service is a service which allows does not have available space. you to record your voice and send someone you want to ◎ Some cell phones do not support receiving voice messages. For inform your well-being in case of a large-scale disaster. details, refer to au homepage. ...
Page 66: File Management
Attaching a microSD memory card File management Remove the back cover and battery pack With the contact (metal) side of the microSD U sing a microSD memory card memory card down, insert the microSD You can save/move/copy data onto a microSD memory card memory card in the direction shown all the (including microSDHC memory card, microSDXC memory way straight into the microSD memory card card) inserted to the product. slot • Do not turn off the product or subject it to impact while • microSD memory card slot is placed above au Micro IC microSD memory card data is being accessed. Doing so Card (LTE) slot. may cause data corruption. ◎ Some applications require a microSD memory card, use the product with the microSD memory card attached. A ttaching/removing a microSD memory card Before attaching/removing microSD memory card, make sure to turn the product off and remove the battery pack. • Attaching/removing microSD memory card is possible with the product turned on. In such case, be careful not to remove the battery. When removing microSD card, be sure to unmount microSD card first. ◎ Make sure that the top and bottom of the microSD memory card • Do not force to attach or remove. are facing correctly. Trying to force a wrongly oriented card into the slot could make it impossible to remove the card and result in damage.
Page 67: Removing A Microsd Memory Card
Removing a microSD memory card F ormatting a microSD memory card Formatting a microSD memory card erases all of the data Remove back cover and battery pack currently stored on it. • To remove microSD memory card with the product turned on, on the home screen, [Apps] →[Settings] → [Storage] On the home screen, [Apps] → [Settings] → → [Unmount SD card] → [OK] and confirm on the status [Storage] bar. [Format SD card] Pull the microSD memory card straight out [Format SD card] → [Delete all] When lock screen appears, authenticate and tap "Delete all". Using Samsung Kies You can synchronize data such as contacts, music, still pictures, videos with the product or update software of the product using Samsung Kies. • Download Samsung Kies from the Samsung web site and install to your PC. For details, visit the web site. Activate Samsung Kies on a PC Connect the product and the PC with microUSB connection cable (sample) ◎ If you try to remove the microSD memory card before unmouting, it may cause malfunction or data loss. ◎ The microSD memory card may be warm after a long time use. It is normal.
Page 68: Data Communication
® Tap a Wi-Fi network → [Connect] Data communication ® • If you select a Wi-Fi network protected by security, enter a password (security key)* and tap "Connect". * The password (security key) is set for an access point. Contact the network administrator for details. ® U sing the wireless LAN (Wi-Fi ) function ® ® • To disconnect from a Wi-Fi network, tap the Wi-Fi network you are connected to → Tap [Forget]. You can connect to the Internet via home wireless LAN ® (Wi-Fi ) environment or public wireless LAN environment outside. ® ◎ Packet communications can be done while the Wi-Fi function is Enjoy large-volume content ® on. However, the Wi-Fi function has priority while connected to Outside At home ® a Wi-Fi network.
Page 69: Function Settings
Setting the Airplane mode F unction settings When airplane mode is set, wireless functions are disabled ® ® (telephone, packet transmission, Wi-Fi and Bluetooth From Settings, set up and manage functions. You can functions). personalize the wallpaper or ringtone, set up security, On the home screen, [Apps] → [Settings] → initialize data, etc. [Airplane mode] Displaying the Setting menu Tap to turn to • Tap to disable airplane mode. On the home screen, [Apps] → [Settings] ® ® You can enable wireless LAN (Wi-Fi ) and Bluetooth Settings menu appears. function even when Airplane mode is ON. Do not use • Alternatively, on the home screen, slide down the status ® wireless LAN (Wi-Fi ) function in a place where the use of bar and tap on the notification panel to display the radio waves is prohibited such as in airplane or hospital. settings menu.
Page 70: Setting The Silent Mode
Setting t he Silent mode (Press and hold for over one second) [Mute]/[Vibrate] S creen lock authentication You can set screen lock authentication to secure your product and prevent unauthorized access. On the home screen, [Apps] → [Settings] [Lock screen] → [Screen lock] [Swipe]/[Pattern]/[Fingerprint]/[PIN]/ [Password] To cancel screen lock setting, tap [None]. Set required items...
Page 71: Overseas Usage
• Depending on the country/region, calling charges may be Overseas usage incurred from the time that you tap Configuring the overseas settings For overseas use without anxiety O btaining the PRL (Roaming Area The overseas network condition is available on the au Information) homepage. Make sure to check the condition before leaving Japan. The PRL (roaming area information) contains information on http://www.au.kddi.com/information/notice̲mobile/global/ roaming areas of overseas partner providers who have signed an international roaming contract with KDDI (au). ■ When the product is stolen or lost Please obtain the latest PRL before traveling. • If the product or au Micro IC Card (LTE) is lost or stolen • To check PRL version, on the home screen, [Apps] → while in overseas, please contact the Customer Service [Settings] → [About device] → [Status], then check "PRL Center immediately to suspend phone service. Please be aware that any calling charges and packet communication version". charges incurred after theft or loss of a phone are the On the home screen, [Apps] → [Settings] responsibility of the customer. → [More networks] • If the au Micro IC Card (LTE) inserted into the product is stolen or lost, the card may be inserted into another [Mobile networks] → [Roaming settings] mobile phone (including GSM mobile phone for overseas use) by a third party. So, it is recommended to set the SIM → [PRL Settings] → [Update PRL version] card lock to protect from improper use by a third party. Listen voice prompt played after connected, then hang up the phone. After the phone is hung up, updating PRL starts. ■ Using the product properly by knowing ...
Page 72: Network Mode Settings
Network mode settings Set network mode where the product is used. On the home screen, [Apps] → [Settings] → [More networks] [Mobile networks] → [Roaming settings] → [ S ystem setting] Japan Use in Japan. Set when using LTE/UMTS/GSM LTE Roaming network overseas. Set when using UMTS/GSM network 3G Roaming overseas. Making a call at your travel destination Making a call to another country (including Japan) from your travel destination You can make a call to Japan or another country from your travel destination. On the home screen, [Phone] Input + (long touch "0"), country code, area code (city code), other party's phone number [ ]...
Page 73: Appendix/Index
separately) Appendix Common AC Adapter 03 Blue (0301PLA) (sold separately) Common AC Adapter 05 (0501PWA) (sold separately) I ntroduction of related accessories ■ 1 8 core-microUSB conversion adapter 01 (0301QYA) (sold separately) ■ Battery Pack (SCL23UAA) ■ a u Carrying Case G Black (0106FCA) (sold separately) ■ Desktop Holder (SCL23PUA) ■ C ommon DC adapter 03 (0301PEA) (sold separately) ■ S amsung 1Seg antenna 01 (01SCHSA) ◎ For the latest information on accessories, visit the au homepage ■ P ortable charger 02 (0301PFA) (sold separately) (http://www.au.kddi.com/) or contact the Customer Service ■ m icroUSB cable 01 (0301HVA) (sold separately) Center. microUSB cable 01 Navy (0301HBA) (sold separately) ◎ Accessories described on this page can be purchased from the ...
Page 74: Using Stereo Headset With Microphone (Sample)
Is Call forwarding set? Before you assume that the product is malfunctioning, Is "Auto reject mode" set? The display is dark. Is "Power saving mode" /"Ultra power saving check the following: mode" set? Symptom What you should check Cannot hear the Is the earpiece volume too low? Cannot turn on Is the battery pack charged? other party. Are you covering the earpiece with your ear? power. Is the battery pack attached properly? Place your ear hole to the earpiece. Is pressed and held for over one second? TV pictures are not Is signal of Digital Terrestrial Television Cannot charge the Is the battery pack attached properly? displayed, pictures Broadcasting strong enough? battery. Is the specified AC adapter (sold separately) stop moving, sound Is broadcasting area correct? surely plugged into an outlet? stops working or Is the Samsung 1Seg antenna 01 connected noise emits. Battery usage time Do you often use the product in places where correctly? is short. (out of service area) is displayed? Is the battery pack end of its life?
Page 75: Updating Software
® Keitai Is "NFC/Osaifu-Keitai lock" set? • If software update has failed or stopped, perform the same Do you hold the product so that the mark again. area is placed over the reader/writer? • If you fail to update software, it may become impossible to Cannot recognize Is a microSD memory card inserted properly? operate the product. If this happens, bring it to an au shop a microSD memory Is the microSD memory card unmounted? card. or PiPit (not accepted by some shops). Cannot operate Install Samsung Kies or later or Windows when connected as Media Player 10 or later to your PC. Downloading and updating software a media device. If you checked items on Troubleshooting but symptom is Update files can be downloaded from the Internet web site not improved, contact the following au Customer Support via wireless communication into the product directly. site of au homepage: On the home screen, [Apps] → [Settings] http://www.au.kddi.com/support/mobile/trouble/repair [About device] → [Software update] U pdating Software [Update now] ■ Notes on software update From here on, follow the onscreen instructions. • When software update is necessary, you will be informed ...
Page 76: After-Sales Service
■ Warranty card A fter-sales service At the store of purchase, thoroughly check and read the ■ When asking for repair name of the retailer, date of purchase and other necessary details filled in on the warranty card, and be sure to keep it For repair, contact Keitai Guarantee Service Center. in a safe place. During the Repairs will be done based on the terms of warranty period services of the free-of-charge repair warranty ■ K eitai Guarantee Service Plus LTE described on the warranty card. Outside the We shall repair the product for a charge as An after-sales service membership program on a monthly warranty period requested by the customer if repair renders it basis called "Keitai Guarantee Service Plus LTE" (monthly usable. fee: 380 yen excluding tax) is available for using your au cell phone for a long time without worries. This service expands coverage for many troubles including malfunction, theft and ◎ Before handing in the product for repair, make a backup of the loss. For details of this service, refer to au homepage or contents of memory since they may disappear during repair. contact Keitai Guarantee Service Center. Note that the Company shall not be liable for any damages and loss of income should the contents of memory be altered or lost. ◎ Recycled parts that meet the Company's quality standards are ◎ You can apply for membership only at the time of purchasing sometimes used for repair. your au cell phone. ◎ Collected au cell phones by Replacement cell phone delivery ◎ Once you cancel the membership, you cannot reapply for it until ...
Page 77 ■ au Micro IC Card (LTE) ■ au after-sales service information The au Micro IC Card (LTE) is lent to you by au. In case of Services Keitai Guarantee Service Plus LTE Members Others loss or damage, the card will be replaced at your expense. Replacement cell phone delivery service When malfunction is suspected, or in case of theft or loss, Spontaneous failure Free of charge No recompense contact an au shop or PiPit. (1st year) Spontaneous failure Customer charge ■ After-sales service (2nd year or later) 1st: 5,000 yen 2nd: 8,000 yen If you are unsure about anything regarding after-sales Partially damage, water soak, irreparable service, contact the following service contact. damage, theft or loss Customer Service Center Holding over and repair (for service canceling procedure in case of loss or theft) Spontaneous failure Free of charge Free of charge From a land-line phone, 0077-7-113 (toll-free) (1st year) Spontaneous failure Free of charge (for 3 Actual cost From an au mobile phone, 113 without area code (toll free) (2nd year or later) years) Business hours 24 hours (7 days a week) Partially damage...
Page 78: Main Specifications
Main s pecifications Replacement cell phone delivery service Display Approx. 5.1 inches ◎ When you have trouble with your au cell phone, replacement Approx. 16,000,000 colors (Organic cell phone (same model, same color, including new battery) is delivered to the specified place by calling to. 1920×1080 dots Return your damaged cell phone within 14 days after Weight Approx. 147 g (with battery pack replacement cell phone is delivered. attached) ◎ Available up to twice in a year from the day you use this service Dimension (W × H × T) Approx. 73 mm×142 mm×8.3 mm as a start day. If you do not use this service in the past year at (Thickest part: 9.8 mm) the subscription to this service, it will be 1st and if you use, it MSM8974AC will be 2nd. System memory Approx. 32 GB * For details, refer to au homepage. Continuous In Japan Approx. 480 hours: 3G Holding over and repair stand-by Approx. 450 hours: 4G (LTE) ◎ Damages and malfunctions intentionally caused by the time* Overseas Approx. 500 hours customer as well as those due to modification (e.g. disassembly, (GSM/UMTS) change of parts, painting, etc.) by the customer are not covered Continuous ...
Page 79: Specific Absorption Rate (Sar) Of Cell Phones
® ® Bluetooth Version Bluetooth standard Ver. 4.0＋LE S pecific Absorption Rate (SAR) of function compliant cell phones ® Output Bluetooth standard Power Class 1 Communication Within 10 m with no obstacles in This model GALAXY S5 mobile phone complies with distance* the range Japanese technical regulations and international guidelines Compatible OPP （Object Push Proﬁle） profiles* HSP （Headset Proﬁle） regarding exposure to radio waves. HFP （Hands-Free Proﬁle） This mobile phone has been designed in observance of A2DP （Advanced Audio Distribution the Japanese technical regulations regarding exposure Proﬁle） AVRCP （Audio/Video Remote to radio waves (*) and limits to exposure to radio waves Control Proﬁle）...
Page 80: Fcc Notice
This equipment has been tested and found to comply with would like to know more detailed information, please refer to the limits of a Class B digital device, pursuant to Part 15 the WHO website. of the FCC Rules. These limits are designed to provide http://www.who.int/docstore/peh-emf/publications/facts̲ reasonable protection against harmful interference in a press/fact̲english.htm residential installation. This equipment generates, uses Please refer to the websites listed below if you would like to and can radiate radio frequency energy and, if not installed know more detailed information regarding SAR. and used in accordance with the instructions, may cause harmful interference to radio communications. ○ Ministry of Internal Affairs and Communications website: http://www.tele.soumu.go.jp/e/sys/ele/index.htm However, there is no guarantee that interference will not ○ Association of Radio Industries and Businesses website: occur in a particular installation; if this equipment does http://www.arib-emf.org/index02.html (in Japanese only) cause harmful interference to radio or television reception, ○ SAMSUNG homepage: which can be determined by turning the equipment off and http://www.samsung.com/jp/support/sar/sarMain.do on, the user is encouraged to try to correct the interference ○ au homepage: by one or more of the following measures: http://www.au.kddi.com/ 1. Reorient/relocate the receiving antenna. * Technical regulations are defined by the Ministerial Ordinance Related to Radio 2. Increase the separation between the equipment and Law (Article 14-2 of Radio Equipment Regulations). receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help.
Page 81: Fcc Rf Exposure Information
The use of accessories that do not satisfy these FCC RF exposure information requirements may not comply with FCC RF exposure Your handset is a radio transmitter and receiver. requirements, and should be avoided. It is designed and manufactured not to exceed the emission The FCC has granted an Equipment Authorization for this limits for exposure to radio frequency (RF) energy set model handset with all reported SAR levels evaluated as by the Federal Communications Commission of the U.S. in compliance with the FCC RF emission guidelines. SAR Government. information on this model handset is on file with the FCC and can be found under the Display Grant section of The guidelines are based on standards that were developed by independent scientific organisations through periodic http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID and thorough evaluation of scientific studies. The standards A3LSCL23. include a substantial safety margin designed to assure the Additional information on Specific Absorption Rates (SAR) safety of all persons, regardless of age and health. can be found on the Cellular Telecommunications & Internet The exposure standard for wireless handsets employs a unit Association (CTIA) Website at http://www.ctia.org/. of measurement known as the Specific Absorption Rate, or European RF Exposure Information SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at Your mobile device is a radio transmitter and receiver. It the ear and worn on the body) as required by the FCC for is designed not to exceed the limits for exposure to radio each model. The highest SAR value for this model handset waves recommended by international guidelines. These when tested for use at the ear is 0.82 W/kg and when worn guidelines were developed by the independent scientific on the body, as described in this user guide, is 0.43 W/kg. organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and Body‒worn operation health.
Page 82: Declaration Of Conformity
As SAR is measured utilizing the devices highest EN 301 489-7 V1.3.1 (11-2005) transmitting power the actual SAR of this device while RADIO EN 300 328 V1.8.1 (06-2012) operating is typically below that indicated above. This is due EN 300 440-1 V1.6.1 (08-2010) to automatic changes to the power level of the device to EN 300 440-2 V1.4.1 (08-2010) ensure it only uses the minimum level required to reach the EN 301 511 V9.0.2 (03-2003) network. EN 301 893 V1.7.1 (06-2012) EN 301 908-1 V5.2.1 (05-2011) D eclaration of Conformity EN 301 908-1 V6.2.1 (04-2013) EN 301 908-13 V5.2.1 (05-2011) ■ Product details EN 301 908-2 V5.4.1 (12-2012) EN 301 908-2 V6.2.1 (10-2013) For the following EN 302 291-1 V1.1.1 (07-2005) Product: GSM WCDMA LTE BT/WiFi Mobile Phone EN 302 291-2 V1.1.1 (07-2005) Model(s): SCL23 and the Directive (2011/65/EU) on the restriction of the use of certain hazardous substances in electrical and ...
Page 83: Export Administration Regulations
GU46 6GG, UK • microSD logo, microSDHC logo, microSDXC logo are trademarks of SD-3C, LLC. 2014.03.24 (Place and date of issue) • The Bluetooth ® smart ready and logo are registered trademarks owned by the Bluetooth SIG, Inc., and Samsung Electronics Co.,Ltd. is licensed to use these trademarks. • Wi-Fi ® , Wi-Fi Protected Setup™, Wi-Fi Direct™, Wi-Fi Stephen Colclough / EU Representative CERTIFIED™, and the Wi-Fi logo are registered trademarks (Name and signature of authorized person) of the Wi-Fi Alliance. * This is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the retailer • Excel ® and PowerPoint ® are trademarks or registered where you purchased your product. trademarks of Microsoft Corporation in the U.S.A. and other countries. Export Administration Regulations ® • Microsoft Word is a product name of Microsoft This product and its accessories may be subject to the Corporation in the U.S.A. Japan Export Administration Regulations ("Foreign Exchange • FeliCa is a contactless IC card technology developed by and Foreign Trade Law" and its related laws). In addition, U.S. Sony Corporation.
Page 84 "Google Voice Search" and "YouTube" are trademarks or ■ Regarding Windows notations registered trademarks of Google Inc. The names of operating systems (Japanese versions) used • iWnn of OMRON SOFTWARE Co., Ltd. is used for in this manual are as follows. conversion methods. iWnn©OMRON SOFTWARE Co., Ltd. • Windows 8 is the abbreviation for Mirosoft ® Windows ® 8 2008-2014 All Rights Reserved. (Windows 8, Pro, Enterprise). ® ® ® • Microsoft , Windows Media , ActiveSync are trademarks ® ® • Windows 7 is the abbreviation for Microsoft Windows or registered trademarks of Microsoft Corporation in the 7 (Starter, Home Basic, Home Premium, Professional, U.S.A. and other countries. Enterprise, Ultimate). • Oracle and Java are registered trademarks of Oracle • Windows Vista is the abbreviation for Microsoft ® Windows Corporation and the subsidiaries and affiliate companies in ® Vista (Home Basic, Home Premium, Business, Enterprise, the U.S. and other countries. Company and product names Ultimate). in this manual, etc., may be trademarks and registered ...
Page 85 standard (henceforth referred to as AVC video) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal and noncommercial activity and/ or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. Visit http://www.mpegla.com • This product is licensed under the VC-1 Patent Portfolio License for the personal and noncommercial use of a consumer to (i) encode video in compliance with the VC-1 standard (henceforth referred to as VC-1 video) and/or (ii) decode VC-1 video that was encoded by a consumer engaged in a personal and noncommercial activity and/ or was obtained from a video provider licensed to provide VC-1 video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. Visit http://www.mpegla.com...
Page 86: Index
Shooting........58 Index Still pictures ......59 Long touch ........41 Video ........60 Silent mode ........68 Slide ..........41 After-sales service ....74 E-mail ..........54 SMS ..........55 Mail ..........54 Airplane mode ......67 Changing E-mail address ..55 Specific Absorption Rate (SAR) E-mail ........
Page 87 For inquiries, call: Customer Service Center For general information, charges and operation information (toll free) Business hours 9:00−20:00 (7 days a week) From ﬁxed-line phones: From au cell phones: without area code PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR AFTER CALLING 157 ON YOUR au CELL PHONE. For loss or theft (toll free) Business hours 24 hours (7 days a week) From ﬁxed-line phones: From au cell phones: Cell phone and PHS operators collect and recycle without area code unused telephones, batteries and battery chargers at In case above numbers are not available, stores bearing the logo regardless of brand and call toll-free: manufacturer to protect the environment and reuse valuable resources. Keitai Guarantee Service Center For loss, theft, damage (toll free) April 2014 1st Edition Business hours 9:00−21:00 (7 days a week) Sold by: KDDI CORPORATION ・ OKINAWA CELLULAR TELEPHONE COMPANY From ﬁxed-line phones/au cell phones, Imported by: SAMSUNG ELECTRONICS JAPAN Co., Ltd. Manufactured by: Samsung Electronics Co., Ltd.

Samsung GALAXY S 5 SCL23 Basic Manual

Quick Links

Related Manuals for Samsung GALAXY S 5 SCL23

Summary of Contents for Samsung GALAXY S 5 SCL23

Table of Contents