Page 1
DELL SE2422HXB 1. Disassembly Procedures Unlock 4 RC screws Turn off the monitor. To remove the stand: Place a flat cushion or a sitting mat near the edge of a table and place the monitor on it with the display facing down.
Page 2
DELL SE2422HXB Disassemble Rear Cover from Bezel Remove 1 tape from Backlight Wire Notice the disassembly order: 1) Disassemble the Top part 2) Disassemble the Left / Right part 3) Disassemble the Bottom part 4) Remove Rear Cover from Bezel...
Page 3
DELL SE2422HXB Disassemble Bezel from panel Unlock 2 hex screws (Screw Torque: 5.0±0.6kgf) Unlock 5 PCBA screws Disassemble CTRL BD from Bezel (Screw Torque: 8.5±1.0kgf) Disassemble SPS BD and I/F BD from Main SHD Remove SPS wire from I/F BD...
Page 4
DELL SE2422HXB Remove electrolyte capacitors (red mark) from printed circuit boards S17-1 Cut the glue between bulk cap. and PCB with a knife S17-2 Ensure cutting path within the glue, don’t touch bulk cap. or PCB...
Page 5
DELL SE2422HXB S17-3 Take out bulk cap. pin solder with soldering iron and absorber S18-4 Lift the bulk cap. up and away from the PCB...
Page 6
DELL SE2422HXB 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...