Advertisement
Quick Links
1 Disassembly Procedures:
Remove 4pcs carton locks, then use a proper tool to
S1
open the carton, then uplift and remove the top
paper box carefully.
Remove the top cushion foam with all accessories
including QSG, Delta-e paper, user's manual, DP
S2
cable, HDMI cable, Type-C cable, USB cable, power
cable and other packing materials.(Note: It depends
on whether users returning the accessories)
Take out the base and stand from bottom cushion
S3
foam, then take out the packed monitor from the
bottom cushion foam.
base
Take out the monitor from EPE-bag and put the LCD
S4
monitor on a protective cushion.
QSG
Delta-E
power cable
Type-C cable
HDMI cable
DP cable
USB cable
monitor
stand
Use a Philips-head screwdriver to remove 4pcs
S5
screws for unlocking mechanisms.
(No.1~4 screw size=M6x12; Torque=9
2
4
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S6
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the USB
LVDS cable and function key cable from the
S7
connectors of the interface board, and then remove
the rear cover.
DELL U4320Q
Go to contents page
0.5kgfxcm)
±
3
1
3
4
1
1
Advertisement
Related Manuals for Dell U4320Q
Summary of Contents for Dell U4320Q
- Page 1 DELL U4320Q Go to contents page 1 Disassembly Procedures: Use a Philips-head screwdriver to remove 4pcs Remove 4pcs carton locks, then use a proper tool to screws for unlocking mechanisms. open the carton, then uplift and remove the top (No.1~4 screw size=M6x12; Torque=9 0.5kgfxcm)
- Page 2 DELL U4320Q Go to contents page Use a Philips-head screwdriver to remove 1pcs screw for unlocking the USB board unit, then release the USB board unit and put it aside. (No.1 screw size=M3x6, Torque=4 0.5kgfxcm) ± Put the rear cover with function key board into a Jip.
- Page 3 DELL U4320Q Go to contents page se a Philips-head screwdriver to remove 4pcs screws for locking the bracket chassis module with the panel (No.1~4 Screw size= M6x12, Torque=9 0.5kgfxcm) ± Turn over the bracket chassis module. Remove the Mylar from the hooks of the bracket, and then use a...
- Page 4 DELL U4320Q Go to contents page S20-4 Take out bulk cap. pin solder with soldering iron and Remove electrolyte capacitors (red mark) from absorber. printed circuit boards. S20-1 Cut the glue between bulk cap. and PCB with a knife. S20-5 Lift the bulk cap. up and away from the PCB.
- Page 5 DELL U4320Q Go to contents page Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used...