Page 1
REFRIGERATOR- FREEZER OWNER'S MANUAL PLEASE READ THIS OWNER'S MANUAL THOROUGHLY BEFORE OPERATING AND KEEP IT HANDY FOR REFERENCE AT ALL TIMES. FRIGORIFERO- CONGELATORE LIBRETTO ISTRUZIONI LEGGERE QUESTO LIBRETTO D'ISTRUZIONI PRIMA DELL'USO E TENERLO A PORTATA DI MANO PER SUCCESSIVE CONSULTAZIONI. ¾Ë¡¶¹Ãº°Æ°¾ËºÆ¸ª...
INSTALLATION ............. 3 IMPORTANT SAFETY INSTRUCTION ....4 CONTENTS INNER PARTS ............5 OPERATIONS............6 Starting Controls For Refrigerator Compartment Super Cool Child Lock Controls For Freezer Compartment Green lon Door Cooling Ice Making (Optional) Vitamin Vegetable Drawer(Optional) Fresh Zone (Optional) Defrosting Deodorizer (Optional) SUGGESTIONS ON FOOD STORAGE ....
INSTALLATION THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE LATEST IN TECHNOLOGY. WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE AND RELIABILITY. BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY. IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
IMPORTANT SAFETY INSTRUCTION w w Warning w Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. w Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. w Do not damage the refrigerant circuit.
INNER PARTS Snack Corner( Optional ) (Cake, Biscuits, Bread) Cover Multi This guide covers several different models. The refrigerator you have purchased may have some or all of the features shown above.
OPERATIONS STARTING When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before restarting. CONTROLS FOR REFRIGERATOR COMPARTMENT To control the Refrigerator temperature, press the REF TEMP button.
OPERATIONS CONTROLS FOR FREEZER COMPARTMENT • The higher number the control setting is, the lower the temperature of the Freezer compartment becomes. FREEZER CONTROL FREEZER MIN • Since the temperature of the refrigerator and freezer NORMAL FREEZER MAX compartments is controlled with a fixed amount of cooled air, the refrigerator compartment will be warmer if the freezer compartment becomes colder.
OPERATIONS ICE MAKING (OPTIONAL) Choose the type of ice-making system you have. General Type To make ice cubes, fill the ice tray with water and place it in the freezer. To remove ice cubes, hold the tray at its ends and twist gently.
OPERATIONS FRESH ZONE (OPTIONAL) When the door is opened, the warmer air can't influence in the fresh zone. So you can store food more fresh in it. The shelf and inserted fresh zone must be placed at its position. If it is moved, the fresh zone can’t fill the role of it. DEFROSTING Defrosting takes place automatically.
SUGGESTIONS ON FOOD STORAGE STORING FOOD Store fresh food in the refrigerator compartment. How food is frozen and thawed is an important factor in maintaining its freshness and flavor. Do not store food which goes bad easily at low temperatures, such as bananas, pineapples, and melons. Allow hot food to cool prior to storing.
CLEANING It is important that you refrigerator be kept clean to INTERIOR PARTS - Wash compartment shelves, prevent undesirable odors. Spilled food should be door racks, storage trays and magnetic door seals wipe up immediately, since it may acidify and stain etc.
LAMP REPLACEMENT NOTE • Dismantling is done in the reverse sequence of assembly. Be sure to unplug the power plug before dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged. FREEZER LAMP REFRIGERATOR LAMP To remove the lamp shield inside the To remove the lamp shield inside freezer compartment, reach behind the refrigerator compartment, pull it...
IMPORTANT WARNINGS Disposal of the old appliance This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable. All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling).