Related Manuals for Samsung SM-408
Summary of Contents for Samsung SM-408
- Page 1 SM-408 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS BG68-00350A http://www.samsungelectronics.com Direct CD for Windows ® 95/98/2000 and N...
- Page 2 COMBO DRIVE SM-408 User's Guide FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 3: Table Of Contents
Do not attempt to repair the COMBO drive yourself. Contact Technical Specifications your dealer or local SAMSUNG representative for all repairs. If you make any adjustments or perform any operations other than those specified in this guide, you run the risk of exposure to hazardous radiation. -
Page 4: Your Combo Drive
Your Combo Drive Upgrading the Firmware Flash Memory The product firmware can be upgraded by downloading the updated file from the following Web site: http://www.samsungelectronics.com System Requirements Before you install the COMBO drive, we strongly recommend that you check that your setup meets the system requirements listed below. Item Description Computer... -
Page 5: Connecting The Cables
Connecting the Cables 1. Power cable You already have an additional IDE device installed in your computer. 2. Master/slave select terminal Second IDE cable First IDE cable 3. IDE cable 4. Audio cable Mother board Connecting the power cable COMBO CD-ROM Hard disc Hard disc... -
Page 6: Installing The Cd Record Utility
Edit the AUTOEXEC.BAT file. Add the C:\SAMSUNG\MSCDEX /D:SSCD000 entry. The SAMSUNG device driver enables discs in the COMBO drive to be read but not recorded in an MS-DOS environment; the driver is located in the D driver - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - folder on the CD record utility disc. -
Page 7: Using The Combo Drive
Using the COMBO Drive To play audio or video CDs and/or DVDs in your COMBO drive, proceed as follows. Do not touch the surface of a disc; hold it by the Push the power button and boot the computer. edges. After booting the computer, open the disc compartment by pressing the Eject button. -
Page 8: Recommended Disc Types
RPC-2 is selected by default If the transfer speed of the CD-ROM drive is slower than the record speed, for the SM-408 COMBO drive. You can change the region code up to reduce the record speed. -
Page 9: Solving Technical Problems
Solving Technical Problems Technical Specifications SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without Problem Meaning / Solution notice. The COMBO drive is not Check that the power, audio and IDE cables are detected by the computer. - Page 10 Printed in Korea...