hit counter code
Olympus PPO-EP02 Instruction Manual
  1. Manuals
  2. Brands
  3. Olympus Manuals
  4. Camera Accessories
  5. PPO-EP02
  6. Instruction manual

Olympus PPO-EP02 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
date of issue 2015.03.
©2015
Printed in China
WC914701

Advertisement

Table of Contents
loading

Related Manuals for Olympus PPO-EP02

Summary of Contents for Olympus PPO-EP02

  • Page 1 date of issue 2015.03. ©2015 Printed in China WC914701...

  • Page 2: Please Read The Following Items Before Use

     Thank you for purchasing the Underwater Lens Port (PPO-EP02) (hereinafter, the Lens Port).  Please read this instruction manual carefully and use the product safely and correctly. Please keep this instruction manual for reference after reading it.  Wrong use may cause damage to the camera and lens inside the Lens Port due to water leakage, and repair may not be possible.

  • Page 3: For Safe Use

    For safe use This instruction manual uses various pictographs for correct use of the product and to prevent danger to the user and other persons as well as property damage. These pictographs and their meanings are shown below. This shows the content regarding assumption of WARNING possibility of human death or severe injury in case of handling with disregard of this indication.
  • Page 4 In case of the loss of image data caused by disassembly, repair or modification etc. by any party other than those appointed by OLYMPUS CORPORATION, we shall bear no responsibility for damage. 2 Use or storage of the product at the following locations may cause defective operation, trouble, damage, fire, internal clouding, or water leakage.
  • Page 5 Do not use adhesive for repairs or other purposes. When repair is required, please contact a dealer or a service station of OLYMPUS CORPORATION. 6 In the event that you discover that water has leaked into the product, stop using the camera underwater immediately, remove any moisture adhered to the product, remove the camera and lens from the Case, and consult a service center.

  • Page 6: Check The Contents Of The Package

    1. Preparations Check the contents of the package Check that all accessories are in the box. Contact your dealer if accessories are missing or damaged. 1PPO-EP02 main body 2O-ring (POL-E301) 3Front cover 4Rear cap 5Silicone grease 6O-ring remover 7Instruction manual (this manual) EN 22...
  • Page 7 Before using, always perform the following advance checks. CAUTION: If the advance test should show water leakage with normal handling, stop using the Lens Port and contact your dealer or an Olympus service station. Attaching/Removing the Rear Cap Remove the O-ring Remove the rear cap and remove the O-ring fitted to the Lens Port.

  • Page 8: Remove Any Sand, Dirt, Etc

    Remove any sand, dirt, etc. After visually checking that dirt has been removed from the O-ring, checks for sand and other foreign matter adhered, damage and cracks can be done by squeezing the entire circumference of the O-ring lightly with your fingertips.

  • Page 9: How To Apply Grease To The O-Ring

    How to Apply Grease to the O-ring Make sure that your fingers and the O-ring are free of dirt, then Apply the exclusive squeeze the appropriate amount of lubricant to the exclusive lubricant onto a finger to O-ring. spread onto the entire circumference of the O-ring (approx.

  • Page 10: Install The O-Ring

    Install the O-ring Confirm that no foreign matter is in the groove and then fit the O-ring. At this time, confirm that the O-ring does not stick out from the groove. Before attaching this product to the Case, make sure that there is no hair, fiber, grains of sand or other foreign matter adhered to the O-ring or to the contact surface (front lid).

  • Page 11: Installation

    3. Mounting the PPO-EP02 on the Case This product should be used only with the appropriate Case (PT-EP08/ PT-EP11). For further details, please see the instruction manual of the Case. To prevent contamination and scratching of the lens, keep the front cover in place when attaching or detaching the Lens Port.
  • Page 12 CAUTION: • When removing this product from the Case, water droplets left in the region of the O-ring of the product can be flicked onto the lens or camera body. In the event that water droplets adhere to the lens or camera, do not panic - wipe them off immediately with a dry cloth etc.

  • Page 13: Using Accessories

    4. Using Accessories Attaching the Anti-Reflection Ring (POSR-EP10: optional) The anti-reflection ring (POSR-EP10) designed for the M.ZUIKO DIGITAL ED 8mm f1.8 Fisheye PRO is recommended as it works to reduce irregular reflection. With the front cap (1) attached to the lens, fit the anti-reflection ring (2) from the rear side of the lens.

  • Page 14: Handling After Shooting

    5. Handling After Shooting CAUTION: After coming out of the water, do not detach the Lens Port from the Case or open the Case. Instead, rinse the entire Case assembly in fresh water. Wash the Case with pure water 1 After use, clean the Case and Lens Port thoroughly with pure water as soon as possible.

  • Page 15: Maintaining The Waterproof Function

    Replace the O-ring even before a year has passed if it shows signs of damage, crack or loss of elasticity. CAUTION: • Please use genuine Olympus silicone grease, silica gel and O-ring. • We recommend to perform the check periodically. EN 31...

  • Page 16: Specifications

    7. Specifications Applicable PT-EP08, PT-EP11 underwater case Applicable lens M.ZUIKO DIGITAL ED 8mm f1.8 Fisheye PRO Pressure resistance Depth of up to 60 m Main materials Body: Aluminum alloy Lens window: AR coated glass Operating 0°C - 40°C (32°F - 104°F) (operation) / environment –20°C - 60°C (–4°F - 140°F) (storage) Dimensions...

Table of Contents