hit counter code
Samsung DBJ Series User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Signage
  5. DBJ Series
  6. User manual

Samsung DBJ Series User Manual

Hide thumbs Also See for DBJ Series:
Table of Contents

Advertisement

Quick Links

User Manual
DBJ (DB43J DB49J)
QBH (QB65H QB75H) QBH-N (QB65H-N QB75H-N)
QHH (QH55H QH65H)
QMH (QM49H QM55H QM65H)
The color and the appearance may differ depending on the product, and the specifications are subject to
change without prior notice to improve the performance.
Recommended hours of use per day for the DBJ, QBH, QBH-N, QHH models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
The QBH-N model has the same specifications as the QBH model except for those specified separately.

Advertisement

Table of Contents
loading

Related Manuals for Samsung DBJ Series

Summary of Contents for Samsung DBJ Series

  • Page 1 User Manual DBJ (DB43J DB49J) QBH (QB65H QB75H) QBH-N (QB65H-N QB75H-N) QHH (QH55H QH65H) QMH (QM49H QM55H QM65H) The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Recommended hours of use per day for the DBJ, QBH, QBH-N, QHH models is less than 16 hours.

  • Page 2: Table Of Contents

    Table of contents Before Using the Product Cable Connection Source Connection Web Browser Copyright Control Codes Remote Workspace Safety Precautions Cleaning Storage Connecting and Using Using MDC Electricity and Safety a Source Device Installation MDC Program Installation/Uninstallation Operation Installation Before Connecting Uninstallation Pre-connection Checkpoints Connecting to MDC...
  • Page 3 Table of contents Screen Adjustment Video Wall Picture Size Settings Video Wall Picture Size Horizontal x Vertical Picture Mode Fit to Screen Screen Position Zoom and Position Backlight / Contrast / Brightness / Sharpness / Format Color / Tint (G/R) Reset Picture Network Status Color Temperature...
  • Page 4 Table of contents Sound Adjustment Network Clock Set Clock Sound Mode Network Status Power On Delay Balance Open Network Settings Network Type Auto Source Switching Equalizer Network Settings (Wired) Auto Source Switching Network Settings (Wireless) Primary Source Recovery HDMI Sound Use WPS Primary Source Sound on Video Call...
  • Page 5 Table of contents Troubleshooting Guide Appendix Security Safety Lock On Button Lock Requirements Before Contacting Samsung Responsibility for the Pay Service (Cost to Customer Service Center Customers) USB Auto Play Lock Testing the Product Not a product defect Mobile Connection Lock...

  • Page 6: Before Using The Product

    © 2017 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

  • Page 7: Safety Precautions

    Safety Precautions Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. Warning ― The following images are for reference only. Real-life situations may differ from what is shown in the images.

  • Page 8: Storage

    Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). Due to the characteristics of high-glossy products, using a UV humidifier nearby may create • An electric shock or injury may result. white-colored stains on the product. ―...

  • Page 9: Installation

    DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. Only use the power cord provided with your product by Samsung. Do • A fire may result. not use the power cord with other products.
  • Page 10 • As the front is heavy, install the product on a flat and stable • Be sure to consult Samsung Customer Service Center if you want surface. to install the product at such a place. Edible oil, such as soybean oil, can damage or deform the product. Do...

  • Page 11: Operation

    If the product is dropped or the outer case is damaged, turn off the Do not lift or move the product by pulling the power cord or any power switch and disconnect the power cord. Then contact Samsung cable. Customer Service Center.
  • Page 12 • Your eyesight may deteriorate. cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. • Product failure, an electric shock or fire may result. Do not hold the product upside-down or move it by holding the stand.
  • Page 13 Rest your eyes for more than 5 minutes for every 1 hour of product Be careful that children do not place the battery in their mouths use. when removed from the remote control. Place the battery in a location that children or infants cannot reach. •...

  • Page 14: Preparations

    Chapter 02 Preparations Checking the Components Components – Contact the vendor where you purchased the product if any components are missing. – The appearance of the components may differ from the images shown. Warranty card Quick Setup Guide Regulatory guide Power cord –...

  • Page 15: Parts

    ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice Parts to improve quality. Parts Description Control Panel Do not pull on the spacer logo using force. The logo may tear or break off. Spacer logo ―...
  • Page 16 ― The panel key is located on the bottom right front of the product. Buttons Description ― If you press the P button on the panel key when the product is turned Power off the product. on, the control menu will be displayed. With the control menu screen displayed, briefly press the panel key to move Power Off Control menu...
  • Page 17 ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice Control Panel to improve quality. QB75H Parts Description Power on the product. If you press the button when the product is turned on, the control menu will be displayed.
  • Page 18 ― If you press the Buttons Description button on the panel key when the product is turned on, the control menu will be displayed. Display the Player menu. Home Control menu Move the panel key up to select Home in the control menu. Display the OSD menu.

  • Page 19: Reverse Side

    Port Description Reverse Side ― The color and shape of parts may differ from what is shown. RS232C OUT Connects to MDC using an RS232C adapter. Specifications are subject to change without notice to improve quality. RS232C IN RJ45 Connects to MDC using a LAN cable. (10/100 Mbps) ―...
  • Page 20 Port Description Reverse Side ― The color and shape of parts may differ from what is shown. USB 1 ¨(1.0A) Connect to a USB memory device. ― The USB ports on the product accept a maximum constant current of Specifications are subject to change without notice to improve quality. 1.0A.
  • Page 21 Port Description Reverse Side ― The color and shape of parts may differ from what is shown. USB 1 ¨(1.0A) Connect to a USB memory device. ― The USB ports on the product accept a maximum constant current of Specifications are subject to change without notice to improve quality. 1.0A.

  • Page 22: Anti-Theft Lock

    Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. ―...

  • Page 23: Remote Control

    Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product. ―...
  • Page 24 Display information about the current input TOOLS INFO Quickly select frequently used functions. source. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu. RETURN EXIT Return to the previous menu. DBJ: Manually select a connected input HDMI source from DVI,...

  • Page 25: Before Installing The Product (Installation Guide)

    Make sure to install the specified wall mount. 15° Tilting Angle and Rotation ― Contact Samsung Customer Service Center for further details. • The product can be tilted at a maximum angle of 15° from a perpendicular wall surface. •...
  • Page 26 Installation on an Indented Wall Minimum 40 mm Minimum 70 mm Minimum 50 mm Minimum 50 mm Ambient temperature: Under 35°C ― When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35°C.

  • Page 27: Installing The Wall Mount

    Installing the Wall Mount ― The cover is easily removable by hand. Remove the cover when you install the wall mount. Do not remove the cover when you do not install the wall mount. ― Removing the cover is necessary only when installing the WMN-M11E (No gap wall mount). ―...

  • Page 28: Preparing Before Installing Wall-Mount

    We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own.

  • Page 29: Wall Mount Kit Specifications (Vesa)

    Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

  • Page 30: Remote Control (Rs232C)

    Remote Control (RS232C) • Pin assignment 1 2 3 4 5 5 4 3 2 1 Cable Connection RS232C Cable Interface RS232C (9 pins) 6 7 8 9 9 8 7 6 TxD (No.2), RxD (No.3), GND (No.5) <Male type> <Female type>...
  • Page 31 LAN Cable • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable • Pin assignment 1 2 3 4 5 6 7 8 -P2- -P1- -P1- -P1- -P2- -P2- Male type ---------- STEREO ---------- PLUG Pin No Standard Color Signal ---------- (3.5ø) White and orange Orange...
  • Page 32 • Connector : RJ45 Cross LAN cable (PC to PC) Direct LAN cable (PC to HUB) RJ45 RJ45 RJ45 Signal Signal ↔ ↔ Signal Signal ↔ ↔ ↔ ↔ ↔ ↔...

  • Page 33: Connection

    Connection • Connection 2 ― Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. • Connection 1 RJ45 RJ45 RS232C RS232C RS232C RS232C • Connection 3 RJ45 RS232C RS232C RS232C RS232C...

  • Page 34: Control Codes

    Control Codes • All communications take place in hexadecimals. The checksum is calculated by adding up all values except the header. If a checksum adds up to be more than 2 digits as shown below (11+FF+01+01=112), the first digit is removed. Viewing control state (Get control command) E.g.
  • Page 35 Power control Volume control • Function • Function A product can be powered on and off using a PC. The volume of a product can be adjusted using a PC. • Viewing power state (Get Power ON / OFF Status) •...
  • Page 36 ― DTV is only available with models that include a TV. Input source control ― This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports. • Function ― MagicInfo is only available with models that contain the MagicInfo function. The input source of a product can be changed using a PC.
  • Page 37 Screen size control PIP On/Off control • Function • Function The screen size of a product can be changed using a PC. The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. •...
  • Page 38 Video Wall Mode Control Safety Lock • Function • Function Video Wall mode can be activated on a product using a PC. PC can be used to turn the Safety Lock On function on or off on a product. This control is only available on a product whose Video Wall is enabled.
  • Page 39 Video Wall On Video Wall User Control • Function • Function Turn Video Wall on or off on the product from your computer. Turn the Video Wall function on or off on the product from your computer. • Get Video Wall On/Off Status •...
  • Page 40 10x10 Video Wall Model 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x2F 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28...
  • Page 41 Wall_SNo: Product Number code assigned to the product 10x10 Video Wall Model : ( 1 ~ 100) Set Number Data 0x01 0x02 0x63 0x64 • Header Command Data length Ack/Nak r-CMD Val1 Val2 Checksum 0xAA 0xFF 0x89 Wall_Div Wall_ • Header Command Data length...

  • Page 42: Connecting And Using A Source Device

    Chapter 03 Connecting and Using a Source Device Before Connecting Connecting to a PC • Do not connect the power cable before connecting all other cables. Pre-connection Checkpoints Ensure you connect a source device first before connecting the power cable. •...

  • Page 43: Connection Using An Dp Cable

    VESA standards. Using a DP cable that is not VESA compliant may cause the product to ― Audio is not available if the DVI port on the product is connected to the HDMI port on the PC function improperly. Samsung Electronics shall not be held responsible for any issues using a DVI-HDMI adapter.

  • Page 44: Connection Using An Hdmi-Dvi Cable

    Connection Using an HDMI-DVI Cable After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings as shown below to enable the video and audio from the computer. • Sound → set HDMI Sound PC(DVI) •...

  • Page 45: Connecting An External Monitor

    Connecting an External Monitor • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. ― Connecting parts may differ in different products. ― The HDMI OUT (DAISY CHAIN OUT) port is only available when the input source is HDMI 2(PC connection) or DisplayPort.

  • Page 46: Connecting To A Video Device

    Connecting to a Video Device • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ―...

  • Page 47: Connection Using An Hdmi Cable

    Connecting to an Audio System Connection Using an HDMI Cable Using an HDMI cable or HDMI to DVI Cable (UHD 30Hz) ― Connecting parts may differ in different products. ― Supported models: DBJ, QBH, QMH • For better picture and audio quality, connect to a digital device using an HDMI cable. •...

  • Page 48: Power Cord Connection Guide

    Power cord connection guide ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. ― Supported models: QHH Connect the power cable to the power Insert the connected power cable through Align the Cover Terminal with the groove port on the back of the product.

  • Page 49: Attaching The Network Box (Sold Separately)

    Attaching the Network box (Sold separately) ― Supported models: QBH, QMH Place the network box as shown. First insert the tabs of the network Attach the network box to the fixed attachment frames. box into the slots marked ( ) on the attachment frame.

  • Page 50: Connecting The Network Box (Sold Separately)

    Connecting the Network box (Sold separately) ― For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. ― Supported models: DBJ, QBH, QMH MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. ―...
  • Page 51 Select a display mode. Enter the IP information. MagicInfo Setup Wizard - v.1.12 MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2 Select Screen Type - step 4 Obtain an IP address automatically Use the following IP address: Landscape IP address: 192 .

  • Page 52: Changing The Input Source

    Changing the Input source Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source. ―...

  • Page 53: Web Browser

    Results page. Choose the search engine you want to use. Set the website to display when the web browser is refreshed. • Google / Bing • Samsung Display Custom Custom Enter the URL to set as the home page. •...

  • Page 54: Remote Workspace

    Privacy & Security Remote Workspace Do Not Track Ask websites not to track you. SOURCE → Source → Remote Workspace → ENTER E • Use / Do not use This function allows you to connect your product to a remote PC or a cloud server. Enter the address of the PC or cloud server you want to connect to.

  • Page 55: Using Mdc

    Chapter 04 Using MDC Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website. After you press the button following the button, the product checks its status for about...

  • Page 56: Connecting To Mdc

    Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. ― The appearance may differ depending on the product. RS232C IN Monitor 1 RS232C OUT RS232C IN RS232C OUT...

  • Page 57: Using Mdc Via Ethernet

    Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable. Connection using a direct LAN cable ― The appearance may differ depending on the product. ―...
  • Page 58 Connection using a cross LAN cable ― The appearance may differ depending on the product. ― Multiple products can be connected using the RS232C IN / OUT port on the product. RS232C IN Monitor 1 RS232C OUT RJ45 RS232C OUT RS232C IN Monitor 2 Computer...

  • Page 59: Player Feature

    Chapter 05 Player feature Accessible using the HOME button on the remote control. Player Description Select between internal or external memory. HOME → Player → ENTER E Play content, templates and schedules configured on the server. Play a range of content such as channels with schedules assigned, templates or files. •...

  • Page 60: When Content Is Running

    When content is running Available menu Press the TOOLS button on the remote control during content playback to configure settings. Control buttons on the remote Menu Description You can use buttons on your remote control to play, pause, or skip between content on the playlist.

  • Page 61: File Formats Compatible With Player

    File Formats Compatible with Player Sound output restrictions • More than one sound output cannot be used. • Supported file systems include FAT32 and NTFS. • Playback priority: network BGM > local BGM > video file in the main frame selected by the •...
  • Page 62 Contents File Extension Container Video Codec Resolution Frame rate Bit rate Audio Codec (fps) (Mbps) *.avi H.264 BP/MP/HP 4096x2160 4096X2160: 30 *.mkv 3840X2160: 60 LPCM *.asf ADPCM(IMA, MS) HEVC (H.265 - Main, Main10) *.wmv Motion JPEG 3840x2160 *.mp4 HE-AAC 1920x1080 *.mov *.3gp MPEG4 SP/ASP...
  • Page 63 Video Audio Image • 3D video is not supported. • Audio content with a Bit rate or Frame rate larger than • Compatible image file format : JPEG, PNG, BMP, MPO the rate specified in the table above can cause choppy ―...
  • Page 64 Power Point WORD • Compatible document file formats • Compatible document file formats • Compatible document file formats – Extension : ppt, pptx – Extension : pdf – Extension : .doc, .docx – Version : Office 97 ~ Office 2007 –...
  • Page 65 Template files • Creation/editing/playback are only available in • Supported in Network Channel Templates. • Compatible document file formats – Extension : .lfd...

  • Page 66: Schedule

    Schedule You can check the content’s playback schedule on the server, imported from an external storage, or on a mobile device. Description HOME → Schedule → ENTER E Select between server and external memory. Schedule Connected View weekly schedule of content playback. [Ch.1] ******* Network Select to view detailed information of each event.

  • Page 67: Clone Product

    Clone Product Export settings on the product to an external storage device. You can also import settings from an external storage device. This option is useful when assigning the same settings to several products. HOME → Clone Product → ENTER E When a duplicate file is not found on the external storage device MENU Connect the external storage device, then run the...

  • Page 68: Id Settings

    ID Settings Assign an ID to a set. Device ID HOME → ID Settings → ENTER E Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224) ― Press u/d to select a number, and press E. ―...

  • Page 69: Video Wall

    Video Wall Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the HOME →...

  • Page 70: Screen Position

    Screen Position To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature. Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form the videowall. To rearrange products, use the direction buttons on the remote control to move a product to another desired number.

  • Page 71: Network Status

    Network Status Check the current network and Internet connection. HOME → Network Status → ENTER E Network Status – The displayed image may differ depending on the model.

  • Page 72: Picture Mode

    Color Expert are applied. – To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness, color, gamma and uniformity, using the color calibration program Color Expert. – To download the Color Expert program, visit www.samsung.com/displaysolutions.

  • Page 73: On/Off Timer

    ― You must set On/Off Timer Clock Set before you can use this feature. On Timer HOME → On/Off Timer → ENTER E On Timer so that your product turns on automatically at a time and on a day of your choosing. The power is turned on with the specified volume or input source.

  • Page 74: Off Timer

    Off Timer Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 Off Timer • Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product.

  • Page 75: Ticker

    Ticker Input text while a video or image is displayed and display the text on the screen. • • Message: Enter a message to display on the screen. HOME → Ticker → ENTER E • Time: Set the Start Time End Time to display a Message.

  • Page 76: Url Launcher

    URL Launcher For details on how to use the URL Launcher feature, contact the dealer the product was purchased from. ― To use the URL Launcher feature, set Play via URL Launcher in System. HOME → URL Launcher → ENTER E URL Launcher URL Launcher –...

  • Page 77: Url Launcher Settings

    URL Launcher Settings • Install Web App: Enter URL to install the web application. • Install from USB Device: Install the web application from the USB storage device. • Uninstall: Remove the installed web application. HOME → URL Launcher Settings →...

  • Page 78: Approving A Connected Device From The Server

    Approving a connected device from the server ― First configure the server Server Network Settings before device approval. Select Unapproved from the sub-menus. Select the device from the list and click the Approve button. Access the server you have assigned to your device. Enter your ID and password to log in.

  • Page 79: Setting The Current Time

    Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Select the menu to check that the device has been registered. When the device is approved by the server, the schedule registered in the selected group Select Device from the side menu bar.

  • Page 80: Screen Adjustment

    Color Expert. – To download the Color Expert program, visit www.samsung.com/displaysolutions. – The displayed image may differ depending on the model.

  • Page 81: Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

    Backlight / Contrast / Brightness Your product has several options for adjusting picture quality. ― When you make changes to Backlight, Contrast, Brightness, Sharpness, Color Tint (G/R), the OSD will be / Sharpness / Color / Tint (G/R) adjusted accordingly. ―...

  • Page 82: Color Temperature

    Color Temperature Adjust the color temperature (Red / Green / Blue). (Range: 2800K–16000K) ― Enabled when Color Tone is set to Off. ― If Picture Mode is set to Calibration, Color Temperature is disabled. MENU m → Picture → Color Temperature →...

  • Page 83: White Balance

    White Balance 2 Point Adjust the color temperature for a more natural picture. MENU m → Picture → White Balance → ENTER E • R-Offset G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness. • R-Gain G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness. •...

  • Page 84: Gamma

    Select whether to apply the brightness, color, gamma and uniformity settings customized using the color calibration program Color Expert to the Information and Advertisement modes. • Don't Apply Apply ― To download the Color Expert program, visit www.samsung.com/displaysolutions. MENU m → Picture → Calibrated Value →...

  • Page 85: Advanced Settings

    ― If Advanced Settings Picture Mode is set to Calibration, Advanced Settings is disabled. Contrast Enhancer MENU m → Picture → Advanced Settings → ENTER E Automatically balance the contrast to prevent excessive differences between bright and dark areas. • Medium High Advanced Settings...

  • Page 86: Color Space Settings

    Color Space Settings Advanced Settings Configure color space settings to refine the spectrum of colors on your screen. Color Space Settings Native ― Enabled when Picture Mode is set to Video/Image. HDMI UHD Color Color Space Motion Lighting Choose a color space. HDR+ Mode •...

  • Page 87: Picture Options

    Picture Options Color Tone Picture Mode is set to Text MENU m → Picture → Picture Options → ENTER E • Cool Standard Warm Picture Mode is set to Video/Image • Cool Standard Warm1 Warm2 Picture Options ― If Picture Mode is set to Calibration, Color Tone is disabled.

  • Page 88: Hdmi Black Level

    HDMI Black Level Picture Options Selects the black level on the screen to adjust the screen depth. Color Tone • Normal Auto ― HDMI Black Level is not available when the input source is set to TV. Digital Clean View HDMI Black Level Auto Film Mode...

  • Page 89: Auto Motion Plus Settings

    Auto Motion Plus Settings Picture Options Enhance picture sharpness to optimize for fast-moving images. Color Tone ― Auto Motion Plus Settings is only available on the QHH models. ― Enabled when Digital Clean View Picture Mode is set to Video/Image. Auto Motion Plus HDMI Black Level Auto...

  • Page 90: Dynamic Backlight

    Dynamic Backlight Picture Options Automatically adjust the backlight to provide the best possible screen contrast under the current conditions. Color Tone • ― Dynamic Backlight is only available on the DBJ, QBH, QMH models. Digital Clean View ― The default values of the Dynamic Backlight function in each Picture Mode...

  • Page 91: Picture Size Settings

    Picture Size Settings Choose size and aspect ratio picture displayed on screen. Picture Size MENU m → Picture → Picture Size Settings → ENTER E Different screen adjustment options are displayed depending on the current input source. ― Available ports may differ depending on the model. Picture Size Settings •...

  • Page 92: Reset Picture

    Reset Picture Resets your current picture mode to its default settings. MENU m → Picture → Reset Picture → ENTER E Picture Reset Picture – The displayed image may differ depending on the model.

  • Page 93: Onscreen Display

    Chapter 07 OnScreen Display PIP Settings The picture from the external video source will be in the main screen and the picture from the product will be in the PIP sub-picture screen. MENU m → OnScreen Display → → ENTER E Main picture Sub picture OnScreen Display...

  • Page 94: Display Orientation

    Display Orientation Onscreen Menu Orientation Configure the menu screen. MENU m → OnScreen Display → Display Orientation → ENTER E • Landscape: Display the menu in landscape mode (default). • Portrait: Display the menu in portrait mode on the right side of the product screen. Display Orientation Source Content Orientation Onscreen Menu Orientation...

  • Page 95: Screen Protection

    Screen Protection Auto Protection Time If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. MENU m → OnScreen Display →...
  • Page 96 Timer Screen Burn Protection You can set the timer for Screen Burn Protection. Pixel Shift Screen Burn Protection feature stops automatically after a specified period of time. Timer Timer Immediate Display Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
  • Page 97 Immediate Display Screen Burn Protection Select the screen saver you want to display immediately. Pixel Shift • Pixel Rolling Bar Fading Screen Timer Immediate Display – The displayed image may differ depending on the model.

  • Page 98: Message Display

    Message Display Source Info Select whether to display the source OSD when the input source changes. MENU m → OnScreen Display → Message Display → ENTER E • No Signal Message Message Display Select whether to display the no-signal OSD when no signal is detected. Source Info •...

  • Page 99: Language

    Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. MENU m → OnScreen Display → Language → ENTER E OnScreen Display Language English...

  • Page 100: Sound Adjustment

    Chapter 08 Sound Adjustment Sound Configure the sound ( ) settings for the product. Sound Mode You can select a sound mode to suit your personal preferences. • Standard: Selects the normal sound mode. • Music: Emphasizes music over voices. MENU m →...

  • Page 101: Balance

    Balance HDMI Sound MENU m → Sound → Balance → ENTER E MENU m → Sound → HDMI Sound → ENTER E Adjust speaker volume levels for sound balance optimization. Select whether to hear from AV(HDMI) or PC(DVI). • Balance L/R: Adjusts the balance between the right and left speaker.

  • Page 102: Sound Output

    Sound Output Auto Volume MENU m → Sound → Sound Output → ENTER E MENU m → Sound → Auto Volume → ENTER E Select speakers for sound output. The volume can vary depending on the channel. • Internal External Receiver (HDMI) Automatically equalize the volume level when switching to another channel.

  • Page 103: Broadcasting

    Chapter 09 Broadcasting Configure the Broadcasting settings for the product. is only available on the DBJ models. Auto Program This feature automatically searches and saves all received channels. Follow the onscreen instruction to auto program. Cancelling Auto Program MENU m → Broadcasting →...

  • Page 104: Program Rating Lock Settings

    Program Rating Lock Settings Configure Program Rating Lock setting. ― Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN number, use the Change PIN function. MENU m → Broadcasting → Program Rating Lock Settings →...
  • Page 105 • Canadian English Rating: Block programs based on their Canadian English rating. • Downloadable U.S. Rating: Block programs based on their downloadable U.S. rating. ― If information is not downloaded from the Broadcasting station, C: Programming intended for children under age 8. / C8+: Programming generally Downloadable U.S.

  • Page 106: Audio Options

    Audio Options Configure your preferred audio options for viewing broadcast content. Preferred Language MENU m → Broadcasting → Audio Options → ENTER E (for digital broadcasts) Select your preferred audio language. The default language is English. Broadcasting ― You can only select a language from among the ones being broadcasted. Audio Options Multi-Track Sound Configure the multi-track sound and language options.

  • Page 107: Channel List

    Channel List Re-registering deleted channels Register deleted channels again, if required. Deleted channels are grayed out and can only be found in the list of all channels. The register function is enabled for deleted channels only. CH LIST → Channel List From the list of all channels, select deleted channels you want to register again.

  • Page 108: Favorites

    Favorites Viewing channels saved under a favorite channel list ― Favorite channel lists are only displayed if they have been created previously. When changing the channel using the channel buttons, channels saved in favorite channel lists Edit Favorites can only be accessed. Select Channel List from the...

  • Page 109: Antenna

    Antenna Changing the order of channels in a favorite channel list Change the order of channels saved in a favorite channel list, if required. Before your product can begin memorizing the available channels, you must specify the type of Select Change Favorites from the screen to switch to the desired favorite channel list.

  • Page 110: Network

    Chapter 10 Network Network Status Open Network Settings MENU m → Network → Network Status → ENTER E MENU m → Network → Open Network Settings → ENTER E You can check the current network and Internet status. Configure network settings to use various smart hub features such as Internet search, content sharing through a home network and feature updates.

  • Page 111: Network Settings (Wired)

    Network Settings (Wired) • Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable. Connecting to a Wired Network See the diagram below.
  • Page 112 Set the network connection to use Internet services such as perform software upgrades. In the pop-up menu that appears, click Status. Automatic Open Network Settings (Wired) On the dialog that appears, click the Support tab. Connect to the network using a LAN cable. On the Support Tab, click the Details button.

  • Page 113: Network Settings (Wireless)

    Enter the password for (AP Name). screen appears, go to step 5. If you select a set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products wireless router that does not have security, go to step 7.
  • Page 114 When done, use the right arrow button to move the cursor to Done, and then press E. How to set up manually The network connection screen appears and the verification process starts. Network Type Wireless from the Open Network Settings page.

  • Page 115: Use Wps

    When done, select at the bottom of the page, and then press E. The network test screen appears and the verification process starts. When the connection has been verified, the “Success! Your device is connected to the Internet. If you have any problems using online services, please contact your Internet service provider.”...

  • Page 116: Server Network Settings

    Server Network Settings Proxy Server Set up your proxy server connection and related functions. MENU m → Network → Server Network Settings → ENTER E • Address Port Password Connect to Server ― Address Port Password are enabled only when Proxy Server is set to On.

  • Page 117: System

    Chapter 11 System Accessibility Voice Guide Settings Voice Guide MENU m → System → Accessibility → ENTER E Switch Voice Guide on or off. The language used for Voice Guide will be the same as the current menu language. • System ―...

  • Page 118: Caption Settings

    Caption Settings Digital Caption Options (digital channels only) Display the audio as text on the screen. Configure the Digital Caption Options settings. ― Caption Settings are only available with models that include a TV. Adjusts the each option. When done, select Close. Caption ―...

  • Page 119: Start Setup

    Start Setup Go through the initial setup steps like you did the first time you used this product. ― Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN number, use the Change PIN function.

  • Page 120: Time

    Time You can configure Clock Set or DST. Configure various time-related settings. ― Press the INFO button if you want to view the current time. MENU m → System → Time → ENTER E Clock Set Select Clock Set. Select Date or Time, and then press E.

  • Page 121: Dst

    Time Switches the DST (Daylight Saving Time) function on or off. Clock Set QBH / QHH / QMH: DBJ: Auto Manual • Start Date: Set the start date of Daylight Saving Time. Power On Delay • Date: Set the end date of Daylight Saving Time. •...

  • Page 122: Auto Source Switching

    Auto Source Switching Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Auto Source Switching MENU m → System →...

  • Page 123: Power Control

    Power Control Auto Power On This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed. MENU m → System → Power Control → ENTER E • PC Module Power Power Control The PC module can be turned on/off separately from the LFD.

  • Page 124: Standby Control

    Standby Control Power Control You can set the screen standby mode to be applied when an input signal is received. Auto Power On ― Standby Control is not available when the input source is set to TV. • Auto PC Module Power Power-saving mode will activate if no input signals are detected even though a source device is connected to Max.

  • Page 125: Eco Solution

    Eco Solution Power Saving Mode Reduce the power consumption by adjusting the screen brightness. MENU m → System → Eco Solution → ENTER E • Medium High Eco Sensor Eco Solution To enhance your power savings, the picture settings will automatically adapt to the light in the room. Power Saving Mode Eco Sensor Eco Sensor...

  • Page 126: Screen Lamp Schedule

    Screen Lamp Schedule Eco Solution Screen Lamp Schedule Power Saving Mode Enable or disable the lamp schedule. Eco Sensor • Screen Lamp Schedule Schedule1, Schedule2 No Signal Power Off 15 minutes Auto Power Off Off (Recommended) Time The panel brightness will change to the brightness set in Lamp at a specified time.

  • Page 127: Temperature Control

    Temperature Control This function detects the internal temperature of the product. You can specify the temperature range that is acceptable. The default temperature is set to 77 °C. MENU m → System → Temperature Control → ENTER E The recommended operating temperature for this product is 75 to 80 °C (based on an ambient temperature of 40 °C).

  • Page 128: External Device Manager

    External Device Manager Manage external devices connected to your signage. ― External Device Manager is only available on the QBH, QHH, QMH models. MENU m → System → External Device Manager → ENTER E Keyboard Manager Set up keyboards to use with your signage. You can add keyboards and configure their setting. External Device Manager Add Bluetooth Keyboard Keyboard Manager...

  • Page 129: Play Via

    Play via Select the appropriate Play via mode depending on the environment where you are using the product. The home screen may be different depending on the setting. • MagicInfo URL Launcher MENU m → System → Play via → ENTER E System Play via MagicInfo...

  • Page 130: Security

    Security Safety Lock On ― Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN number, use the Change PIN function. MENU m → System → Security → ENTER E ― Change the PIN to keep your device secure. Turn Safety Lock On on or off.

  • Page 131: Mobile Connection Lock

    Mobile Connection Lock Security Restrict other devices on your network, such as smart phones and tablets, to share content with your signage. Mobile Connection Lock • Remote Management Allow Remote Management Network Port You can Allow Deny external commands to access your device via a network. USB Port •...

  • Page 132: General

    Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ Game Mode feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. • Empty Storage ―...
  • Page 133 Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connections. •...

  • Page 134: Hdmi Hot Plug

    ― You can download a custom logo into the product from an external USB device. ― The file name of the custom logo you want to download must be saved as “samsung” in all small letters. – The displayed image may differ depending on the model.

  • Page 135: Game Mode

    Game Mode General When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming Smart Security experience by selecting game mode. • Anynet+ (HDMI-CEC) ― Precautions and limitations for Game Mode HDMI Hot Plug To disconnect the game console and connect another external device, set Game Mode in the setup menu.

  • Page 136: Reset System

    Reset System This option returns the current settings under system to the default factory settings. MENU m → System → Reset System → ENTER E System Reset System – The displayed image may differ depending on the model.

  • Page 137: Support

    Chapter 12 Support Software Update Contact Samsung MENU m → Support → Software Update → ENTER E MENU m → Support → Contact Samsung → ENTER E Software Update menu lets you upgrade your product software to the latest version.

  • Page 138: Troubleshooting Guide

    Chapter 13 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center – Before calling Samsung Customer Service Center, test your product Testing the Product as follows. If the problem persists, contact Samsung Customer Service Check if your product is operating normally by using the product test function.

  • Page 139: Check The Followings

    Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when The blank spaces found on the screen have nothing to do with the product.
  • Page 140 Screen issue The screen is not clear. The screen is blurry. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
  • Page 141 Lines (red, green or blue) are displayed on the screen. These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a Samsung Service Center to resolve the issue. The display looks unstable and then freezes.
  • Page 142 Sound issue Video is available but there is no sound. If an HDMI cable is connected, check the audio output settings on the PC. Go to Sound and change Sound Output to Internal. If a source device is used • Make sure the audio cable is properly connected to the audio input port on the product.
  • Page 143 Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity. Source device issue A beeping sound is heard when my PC is booting.
  • Page 144 Other issue There is no sound from the speakers in HDMI mode when a DVI cables do not transmit sound data. DVI-HDMI cable is connected. Make sure to connect the audio cable to the correct input jack to enable audio. HDMI Black Level is not functioning properly on an HDMI This function is available only when a source device, such as a DVD player and STB, is...

  • Page 145: Q & A

    Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor Settings. •...

  • Page 146: Specifications

    Chapter 14 Specifications General Model Name DB43J DB49J QM49H Panel Size 43 CLASS (42.5 inches / 107.9 cm) 49 CLASS (48.5 inches / 123.2 cm) 49 CLASS (48.5 inches / 123.2 cm) Display area 940.89 mm (H) x 529.25 mm (V) 1073.779 mm (H) x 604.00 mm (V) 1073.78 mm (H) x 604.00 mm (V) 37.0 inches (H) x 20.8 inches (V)
  • Page 147 ― This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. ― For detailed device specifications, visit the Samsung Electronics website. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799...

  • Page 148: Preset Timing Modes

    Preset Timing Modes ― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
  • Page 149 QB65H / QB75H / QB65H-N / QB75H-N / QH55H / QH65H / QM49H / QM55H / QM65H Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) IBM, 640 x 480 31.469 59.940 25.175 IBM, 720 x 400 31.469 70.087 28.322...
  • Page 150 Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1366 x 768 47.712 59.790 85.500 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 60.000 60.000 108.000 VESA, 1680 x 1050 65.290...
  • Page 151 DB43J / DB49J Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667 30.240 MAC, 832 x 624 49.726 74.551 57.284 MAC, 1152 x 870 68.681 75.062 100.000...
  • Page 152 Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) VESA, 1366 x 768 47.712 59.790 85.500 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 RB 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080...

  • Page 153: Appendix

    External impact or drop. ― When the service is requested, in spite of in warranty, we may charge you for a visit from a • Use of supplies or separatly sold product unspecified by Samsung. service technician in the following cases. •...

  • Page 154: Prevention Of Afterimage Burn-In

    Such a voltage difference between electrodes increases with time and makes the liquid crystals 20:30 20:30 SAMSUNG SAMSUNG thinner. When this occurs, a previous image can remain on the screen when the pattern changes. 21:10...

  • Page 155: License

    YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE. For information on the Open Source License Notice, contact the Samsung Customer Center or send email to oss.request@samsung.com.

  • Page 156: Terminology

    Terminology Plug & Play____ Plug & Play is a DVD (Digital Versatile Disc)____ 480i / 480p / 720p / 1080i / Non-interlace Mode and Interlace Vertical Frequency____ The product displays a single image many times function that allows the automatic DVD refers to a CD-sized mass 1080p____ Each of the scanning Mode____ Non-interlace mode...

This manual is also suitable for:

Qbh seriesQbh-n seriesQhh seriesQmh seriesDb43jDb49j ... Show all

Table of Contents