Table of Contents
Advertisement
Quick Links
WV-S1132 / WV-S1132RF
Model No.
WV-S1131 / WV-S1131PJ
* For information about the installation tasks, refer to the provided Installation
Guide. For information about how to perform the settings and how to operate
the camera, refer to the Operating Instructions on the provided CD-ROM.
* WV-S1131PJ is the same model as the Network Camera WV-S1131.
* WV-S1132RF and WV-S1132EG are the same model as the Network Camera
WV-S1132.
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
WV-S1112 / WV-S1111
(Please purchase the compatible lens separately.)
Before attempting to connect or operate this product,
Important Information
Network Camera
WV-S1132EG
WV-S1131
Advertisement
Table of Contents
Related Manuals for Panasonic WV-S1132RF
Summary of Contents for Panasonic WV-S1132RF
- Page 1 Operating Instructions on the provided CD-ROM. * WV-S1131PJ is the same model as the Network Camera WV-S1131. * WV-S1132RF and WV-S1132EG are the same model as the Network Camera WV-S1132. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
-
Page 2: Table Of Contents
Contents Limitation of liability ........................3 Disclaimer of warranty ........................3 Preface ............................4 About notations ..........................4 Main functions ..........................5 About the user manuals ........................ 6 System requirements for a PC ...................... 6 Trademarks and registered trademarks..................7 Copyright ............................ -
Page 3: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic i-PRO Sensing Solutions Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 4: Preface
Preface This product is an indoor use box-type monitoring camera with a 10BASE-T/100BASE-TX network port for network connection. By connecting to a network (LAN) or the Internet, images and audio from the camera can be moni- tored on a PC via a network. Note: •... -
Page 5: Main Functions
This allows H.265 compression in addition to conventional H.264 compression technology, and when combined with Smart Facial Coding, reduces data load compared to our previous models. Panasonic's own intelligent auto (iA) feature provides increased discernibility even in environments with poor visibility... -
Page 6: About The User Manuals
About the user manuals Product documentation is composed of the following documents. • Important Information (this document): Provides basic information about the product. • Installation Guide: Explains installation, mounting, cable connections, and adjusting the field of view. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. -
Page 7: Trademarks And Registered Trademarks
IMPORTANT: • For information on the operation verification of the supported operating systems and web browsers, refer to our website at https://security.panasonic.com/support/info/. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. -
Page 8: Open Source Software
• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code. • Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code. -
Page 9: Precautions
Precautions Do not insert any foreign objects. Do not attempt to disassemble or modify Fire or electrical shock may be caused if water this product. or any foreign objects, such as metal objects, Failure to observe this may cause fire or electric enter inside the unit. - Page 10 Turn the power off when do wiring of this [Precautions for use] product. When the product is accessible from the Failure to observe this may cause electric Internet shock. In addition, short circuit or wrong wiring To prevent unauthorized access, note the fol- may cause fire.
- Page 11 When an error is detected, this product About the MOS image sensor will restart automatically. • When continuously shooting a bright light source such as a spotlight, the color filter This product will be inoperable for around 2 minutes after the restart just as when the of the MOS image sensor may become deteriorated and this may cause discolor- power is turned on.
- Page 12 Equipment classification and power source indication label Refer to the indication label on the top side of this unit for the equipment classification, power source, and other information. Product disposal/transfer Data saved on this product or a storage device used with this product may lead to personal information leakage.
-
Page 13: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to the provided Installation Guide. In order to prevent injury, the product... - Page 14 Screw tightening Router • The screws and bolts must be tightened When connecting this product to the Internet, use a broadband router with the port forward- with an appropriate tightening torque according to the material and strength of ing function (NAT, IP masquerade). Refer to the Operating Instructions on the pro- the installation area.
-
Page 15: Parts And Functions
Parts and functions 【Rear】 * This illustration represents WV-S1112 1 2 V DC power supply terminal Network connector (RJ45) SD ERROR/ABF indicator ACT indicator LINK indicator S1132 S1112 F RS485 terminal EXT I/O terminals Audio output connector Audio input connector MONITOR OUT terminal (factory shipment: NTSC monitor) INITIAL SET button (Initializing / NTSC ⇔... - Page 16 12 V DC power supply terminal Caution: A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 12 V DC POWER SUPPLY. ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
- Page 17 EXT I/O terminals Note: Off, input, and output of the external I/O terminal 2 and 3 can be switched by configuring the setting. Refer to the Operating Instructions on the provided CD-ROM for further information about the EXT I/O terminal 2 and 3 (ALARM IN2, 3) settings ("Off", "Alarm input", "Alarm output" or "AUX output").
- Page 18 MONITOR OUT terminal (factory shipment: NTSC monitor) Used to connect a monitor used for adjustments during installation or when performing service. IMPORTANT: The adjustment monitor is used for checking the adjustment of the angular field of view when installing the camera or when servicing. It is not provided for recording/monitoring use. ...
- Page 19 ■Indicators and buttons (rear) INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) Follow the steps below to initialize the network camera. ⑴ Turn off the power of the camera. When using a PoE hub, disconnect the Ethernet cable from the camera.
- Page 20 : To our website Depending on the scanning application used, the Data Matrix may not be able to be read correctly. In this case, access the site by directly entering the following URL. https://security.panasonic.com/support/qr_sp_select/ Auto back focus button (ABF) SD slot (SD)
- Page 21 It is recommended to use a compatible high-resolution lens especially when the illuminance level of the photographic subject is low and the camera is used with the lens iris open. Refer to our website (https://security.panasonic.com/support/info/) for further information about the compatible lens.
- Page 22 ■ Tripod mount base(accessory) Use the tripod mount base (accessory) when mounting the camera to raise the camera mounting position. S ecure the tripod mount base (accessory) to the bottom side of the camera using 2 fixing screws. (Recommended tightening torque:0.39 N·m {0.29 lbf·ft}) Size of the mounting hole: 1/4-20UNC camera tripod mounting hole (depth 9 mm {11/32 inches}) 1/4-20UNC camera tripod mounting...
-
Page 23: Insert/Remove An Sd Memory Card
Insert / remove an SD memory card Note: Refer to the Operating Instructions on the provided CD-ROM for further information about the SD memory card settings. ■ Insert an SD memory card 【１】 Open the slide cover on the side of the camera, insert an SD memory card fully into the SD memory card slot until a click is heard. -
Page 24: Troubleshooting
Use an SD memory card formatted on the camera. Or install the software to format the SD memory card on the PC. Refer to our website (https://security.panasonic.com/support/info/) for fur- ther information about the supported software. • Isn't the inserted SD memory card faulty? - Page 25 Reference Symptom Cause/solution pages • Check the following. • Grounding of the camera, a switching hub or peripheral devices are not done. • The camera is used near an electrical power line. • The camera is used near a device which produces Audio input contains strong magnetic field or radio waves (such as near noise.
-
Page 26: Specifications
{2-15/16 inches (W) × 2-1/4 inches (H) × 5-3/4 inches (D)} (excluding lens/ power cord plug) Approx. 350 g {0.77 lbs} Mass: Finish: PC/ABS resin (Sail white) *1 Refer to our website (https://security.panasonic.com/support/info/) for further information about Power source and Power consumption information. - Page 27 Camera • Image sensor: 1/2.8 type MOS image sensor Effective pixels: Approx. 2.1 mega pixels Scanning area: 5.57 mm (H) × 3.13 mm (V) {7/32 inches (H) × 1/8 inches (V)} Scanning system: Progressive Minimum illumination: S1131 S1132 Color : 0.01 lx {0.00093 footcandle} (F1.4, Maximum shutter: Off (1/30 s), AGC: 11) 0.0007 lx {0.00007 footcandle} (F1.4, Maximum shutter: max.
- Page 28 Light control mode setting: Outdoor scene/ Indoor scene (50 Hz)/ Indoor scene (60 Hz)/ ELC/ Fix shutter Shutter speed: 1/30 Fix, 3/120 Fix, 2/100 Fix, 2/120 Fix, 1/60 Fix, 1/100 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix, 1/1000 Fix, 1/2000 Fix, 1/4000 Fix, 1/10000 Fix *1/30 Fix to 2/120 Fix is available during 30 fps mode only.
- Page 29 Image compression method * H.265/ H.264 Transmission priority: Constant bit rate / VBR / Frame rate / Best effort Frame rate: 1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/ 30 fps*/ 60 fps* * The frame rate is limited to “bit rate”.
- Page 30 *6 Refer to our website (https://security.panasonic.com/support/info/) for latest information about the browser. *7 Refer to our website (https://security.panasonic.com/support/info/) for latest information about the compatible SD memory cards. *8 When repeatedly recording images on an SD memory card using the auto overwrite function, make sure to use an SD memory card with high reliability and durability.
- Page 31 Fukuoka, Japan Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada Authorised Representative in EU: 1-877-495-0580 https://www.panasonic.com/ca/ Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany © Panasonic i-PRO Sensing Solutions Co., Ltd. 2019 N0916-9109 PGQP2261QA...