Advertisement
Quick Links
1
DELL P2319H
Go to contents page
1. Disassembly Procedures:
S1
Open the Pizza carton with a proper tool.
Take out all of the
cable, power cable, USB cable, CD&user's manual,
S2
stand and base from the carton from the
carton.(Note: It depends on whether users returning
the accessories)
Take out of the Paper-top and monitor from the
S3
carton, then take out the monitor from the EPE bag
and put the LCD monitor on a protective cushion.
accessories including
QSG,
QSG
power cable
DP cable
USB cable
base
stand
user's manual
Use a Philips-head screwdriver to remove four
S4
screws for unlocking mechanisms.
(No.1~4 screw size=M4x10; Torque=12
DP
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S5
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the USB
S6
FFC cable from the connector of the interface board,
and then remove the rear cover.
±
0.5kgfxcm)
2
3
1
4
.
3
4
1
Advertisement
Related Manuals for Dell P2319H
Summary of Contents for Dell P2319H
- Page 1 DELL P2319H Go to contents page 1. Disassembly Procedures: Use a Philips-head screwdriver to remove four screws for unlocking mechanisms. Open the Pizza carton with a proper tool. (No.1~4 screw size=M4x10; Torque=12 ± 0.5kgfxcm) Take out all of the accessories including...
- Page 2 DELL P2319H Go to contents page Use a Philips-head screwdriver to remove 2pcs Use a Philips-head screwdriver to remove one screw for unlocking the USB board unit, then release the screws for unlocking the bracket with the panel. USB board unit and put it aside.
- Page 3 DELL P2319H Go to contents page Remove the Mylar from the hooks of the bracket. Use a Philips-head screwdriver to remove six screws for unlocking the circuit board, release all the cables from the hooks. (No.1~5 screw size=M3x7.5, Torque=6±0.5kgfxcm; No. 6 screw size=M4x8, Torque=6±0.5kgfxcm) Lift up the panel module for releasing the front bezel away from the panel module.
- Page 4 DELL P2319H Remove electrolyte capacitors (red mark) from printed circuit boards S1 -1 Cut the glue between bulk cap. and PCB with a knife S1 -2 Ensure cutting path within the glue, don’t touch bulk cap. or PCB S1 -3 Cut into the bottom of bulk cap. and pull it up carefully...
- Page 5 DELL P2319H S1 -4 Take out bulk cap. pin solder with soldering iron and absorber S1 -5 Lift the bulk cap. up and away from the PCB...
- Page 6 DELL P2319H . Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...