Table of Contents
Advertisement
22
www.aeg.com
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-Off
For safety reasons the oven turns off
automatically after some time, if a
heating function works and you do not
change any settings.
(°C)
30 - 115
120 - 195
200 - 245
250 - maximum
The Automatic Switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the oven is
turned off, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
again and again until the
to confirm.
the heating function
works.
lets you turn the function:
Set + Go on and off.
(h)
12.5
8.5
5.5
3
– if the oven is turned off and you
) to start
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
10.8 Mechanical door lock
The door lock is unlocked when you buy
the oven.
set the function: Minute Minder.
When the function ends, the
display goes back to the night
brightness.
CAUTION!
Do not move the door lock
vertically.
Do not push the door lock
when you close the oven
door.
Advertisement
Table of Contents
