Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. SPECIFICATIONS Model: DCL282F Capacity with a dust bag 500 mL with a paper filter 330 mL...
21. Follow all charging instructions and do not SAFETY WARNINGS charge the battery pack or tool outside the temperature range specified in the instruc- tions. Charging improperly or at temperatures Cordless cleaner safety warnings outside the specified range may damage the battery and increase the risk of fire.
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum...
Battery protection system NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. The tool is equipped with a tool/battery protection sys- tem. This system automatically cuts off power to the Switch action motor to extend tool and battery life.
Installing dust bag ASSEMBLY Use the dust stopper when installing dust bag. Be CAUTION: careful not to take the upper side for the lower side by Always be sure that the tool is mistake because they are different each other. switched off and the battery cartridge is removed before carrying out any work on the tool.
Page 7
Overlap the frame of dust stopper with that of the dust bag. Installing the paper filter Use the dust stopper also when installing paper filter. Be careful not to take the upper side for the lower side by mistake because they are different each other. Place the dust stopper and the dust bag together into the cleaner cavity in the same direction of arrow on the dust stop- per.
There is no distinction between the upper and Spread the container part of the paper filter inside lower sides of the paper filter. You may insert its pro- the cleaner. trusion of any side into the lower groove of the dust stopper.
Page 9
When using the extension wand with When using the nozzle lock function To install the nozzle, twist and insert it securely to the suction inlet of the cleaner or the end of extension To install the extension wand, insert it to the suction wand.
Page 10
Corner nozzle For picking up dust on a floor in a standing position, it is convenient to attach the extension wand to the cleaner. Fit on the corner nozzle for cleaning corners and crev- ices of a car or furniture. ►...
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service ► 1. Dust stopper 2. Dust bag Centers, always using Makita replacement parts. NOTICE:...
Dust stopper Cleaning Wipe dust off from the dust stopper. Remove dust and dirt on the sponge part by lightly tapping it. Cleaner body From time to time wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. Clean out also the suction opening, dust bag/paper filter mounting area and the dust stopper.
CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.