Makita DTS141 Instruction Manual
Cordless oil-pulse driver
Hide thumbs
Also See for DTS141:
- Instruction manual (37 pages) ,
- Technical information (11 pages) ,
- Instruction manual (40 pages)
Related Manuals for Makita DTS141
Summary of Contents for Makita DTS141
- Page 1 INSTRUCTION MANUAL Cordless Oil-Pulse Driver DTS131 DTS141 015149 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model DTS131 DTS141 Machine screw 4 mm - 8 mm 4 mm - 8 mm Capacities Standard bolt 5 mm - 8 mm 5 mm - 8 mm Impact mode (Hard) 0 - 3,000 min 0 - 3,200 min... - Page 3 Avoid body contact with earthed or grounded EC Declaration of Conformity surfaces such as pipes, radiators, ranges and Makita declares that the following Machine(s): refrigerators. There is an increased risk of Designation of Machine: electric shock if your body is earthed or grounded.
- Page 4 14. Do not overreach. Keep proper footing and 25. Use power tools only with specifically balance at all times. This enables better control designated battery packs. Use of any other of the power tool in unexpected situations. battery packs may create a risk of injury and fire. 15.
-
Page 5: Functional Description
ENC007-8 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: Always be sure that the tool is switched off and the • FOR BATTERY CARTRIDGE battery cartridge is removed before adjusting or Before using battery cartridge, read all instructions checking function on the tool. and cautionary markings on (1) battery charger, (2) Installing or removing battery cartridge battery, and (3) product using battery. - Page 6 When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. 015151 Characteristics of Cordless Oil-impulse Driver 1. Button Makita Cordless Oil-impulse Driver hydraulically operated impact tool using oil viscosity to produce impacts. Since oil viscosity changes with the temperature, be aware of the following two points when operating the tool.
- Page 7 Changing the impact force 1. Changed in four steps 2. Hard 3. Medium 4. Soft 5. T mode 6. Button 012609...
- Page 8 Maximum blows Impact force grade Application Work displayed on panel DTS131 DTS141 Hard Tightening in underwork 2,500 2,700 Tightening when force material / Tightening long (min (min and speed are desired. screws. Medium 2,200 2,200 Tightening when a good Tightening in the finishing...
- Page 9 Installing or removing driver bit or socket bit Battery indicator status Remaining battery capacity Blinking 50% - 100% 20% - 50% 004521 0% - 20% Use only bits that has inserting portion shown in the figure. For tool with shallow bit hole Charge the battery 015191 Use only these type of bit.
-
Page 10: Operation
Procedure 2 CAUTION: In addition to the procedure(1) above, insert the bit- Never obstruct the air vents on the side of the tool • piece into the sleeve with its pointed end facing in. for cooling down oil unit and motor during operation. -
Page 11: Maintenance
If you need any assistance for more details regarding torque will be reduced. these accessories, ask your local Makita Service Center. Driver bit or socket bit Screw bits •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885375-222...