[3D Playback]
•
This will work when the
•
Refer to
P148
for the method to playback 3D pictures in 3D.
[Rotate Disp.]
•
Refer to
P30
for information about how to play back pictures.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
The display is not rotated during Multi Playback.
[Version Disp.]
[Format]
•
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not
turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Centre.
Setup the output method for 3D pictures.
[
] ([3D]):
Set when connecting to a 3D compatible television.
[
] ([2D]):
Set when connecting to a television not compatible with 3D.
Set this when you would like to view pictures in 2D (conventional
image) on a 3D compatible television.
HDMI
cable (optional)
micro
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[
] ([On]):
It will rotate and display vertically.
[
] ([External Only]):
It will display vertically only when playing back connected to a TV.
[
] ([Off]):
It is possible to check which version of firmware is on the camera.
The built-in memory or card is formatted (Pictures in My Photo
Album are also formatted). Formatting irretrievably deletes all the
data so check the data carefully before formatting.
- 47 -
Basic
is connected.