hit counter code
Panasonic MC-CG476-JE7A Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Vacuum Cleaner
  5. MC-CG476-JE7A
  6. Service manual
Panasonic MC-CG476-JE7A Service Manual

Panasonic MC-CG476-JE7A Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

TABLE OF CONTENTS

1 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 5
removal------------------------------------------------------- 7
4.4. Motor removal ---------------------------------------------- 9
4.6. Rail base U replacement -------------------------------10
5 Wiring Connection Diagram ---------------------------------12
6 Exploded View and Replacement Parts List -----------13
6.1. EXPLODED VIEW (ATTACHMETS)-----------------13
6.2. PARTS LIST (ATTACHMETS)-------------------------14
6.3. EXPLODED VIEW (BODY UNIT) --------------------15
Model No.
Product Color :J)Metalic red
Destination
PAGE
6.4. PARTS LIST (BODY UNIT)---------------------------- 16
6.5. PACKING INSTRUCTIONS --------------------------- 17
6.6. PACKING LIST ------------------------------------------- 18
© 2008 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
Order No.VCB0803007CE
Vacuum Cleaner
MC-CG476-JE7A
:Germany
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic MC-CG476-JE7A

Summary of Contents for Panasonic MC-CG476-JE7A

  • Page 1: Table Of Contents

    Order No.VCB0803007CE Vacuum Cleaner MC-CG476-JE7A Model No. Product Color :J)Metalic red Destination :Germany TABLE OF CONTENTS PAGE PAGE 1 Specifications ----------------------------------------------------- 2 6.4. PARTS LIST (BODY UNIT)---------------------------- 16 2 Location of Controls and Components ------------------- 3 6.5. PACKING INSTRUCTIONS --------------------------- 17 3 Troubleshooting Guide ----------------------------------------- 5 6.6.

  • Page 2: Specifications

    1 Specifications Model No. MC-CG476-JE7A Power source AC230~50Hz Input power (MAX) 2500W Input power (Nominal) 2100W Power control Extension wand Telescopic Turbin nozzle Dimensions (WxLxH)mm 280x425x260 Net weight 5.3kg Cleaning tools Crevice nozzle / Dusting brush...

  • Page 3: Location Of Controls And Components

    2 Location of Controls and Components...

  • Page 5: Troubleshooting Guide

    3 Troubleshooting Guide CONDITION CHECKPOINT METHOD OF INSPECTION CAUSE / REMEDY Motor fails to rotate Power supply cord Check power supply cord continu- If there is no continuity, replace the ity. cord reel patition unit. Fuse of P.C.B. Ass’y Check fuse continuity. If there is no continuity, replace (250V, 13A) P.C.B.

  • Page 6: Disassembly And Assembly Instructions

    4 Disassembly and Assembly Instructions Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner. Remove the power plug from the outlet. * Caution: 1. Do not attempt to modify the machine, parts, etc. when marking repairs. 2.

  • Page 7: Printed Circuit Board Assembly (P.c.b Ass'y) Removal

    3. Lift the upper body U to separate it from the lower body U. 3. Wiring illustration 4. Remove the P.C.B. Ass'y from the P.C.B. holder. 4.3. Printed circuit board assembly * When removing the P.C.B Ass’y, widen the frame of the P.C.B holder, and then remove the P.C.B from the (P.C.B Ass’y) removal hook of the P.C.B holder.
  • Page 8 5. Remove the fastening terminal of the lead wire from cord reel partition U connected to the printed circuit board and that of the lead wire from the motor. * Note: When removing the fastening terminal of the lead wire, please hold the terminal fixed to the printed circuit board to prevent an excessive load from being applied to it.

  • Page 9: Motor Removal

    4.4. Motor removal 2. Remove all components fitted to the motor. a. Remove the motor support rubber (rear). 1. Lift the motor section from the lower body U. b. Remove the motor support front. c. Remove the noise suppressor. d. Remove the motor support rubber (front).

  • Page 10: Cord Reel Partition Unit Replacement

    4.5. Cord reel partition unit 4.6. Rail base U replacement replacement 1. Remove the screw fixing the rail base U onto the cord reel partition U. 1. Increase the gap width between the cord reel and the 2. Remove the rail base U from the cord reel partition U. lower body with a screwdriver.

  • Page 11: How To Disassemble The Turbine Nozzle

    4.8. How to disassemble the 4.8.3. Turbine Ass’y 1. Pull up the floor nozzle wand U and remove the turbine turbine nozzle ass’y. (Fig.22) 4.8.1. Agitator ass'y 1. Rotate the Lock on the brush cover to unlock and remove the brush cover U. 2.

Table of Contents