Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita JR103DWAE
Summary of Contents for Makita JR103DWAE
- Page 1 INSTRUCTION MANUAL Cordless Recipro Saw JR103D JR105D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: JR103D JR105D Length of stroke 13 mm Strokes per minute 0 - 3,300 min Max. cutting capacities Pipe 50 mm Wood 50 mm Rated voltage D.C. 10.8 V - 12 V max Battery cartridge BL1015, BL1040B, BL1015, BL1040B, BL1016, BL1041B BL1016,... -
Page 3: Ec Declaration Of Conformity
For European countries only electric shock. Makita declares that the following Machine(s): Designation of Machine: Cordless Recipro Saw If operating a power tool in a damp location Model No./ Type: JR103D, JR105D... - Page 4 Maintain power tools. Check for misalignment Do not cut oversize workpiece. or binding of moving parts, breakage of parts Check for the proper clearance beyond the and any other condition that may affect the workpiece before cutting so that the blade will power tool’s operation.
-
Page 5: Functional Description
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum ► 1 . Red indicator 2. Button 3. Battery cartridge... -
Page 6: Battery Protection System
Battery protection system Switch action The tool is equipped with a battery protection system. CAUTION: Before installing the battery car- This system automatically cuts off power to the motor to tridge into the tool, always check to see that the extend battery life. -
Page 7: Adjusting The Shoe
Insert the recipro saw blade into the blade clamp as far NOTE: Use a dry cloth to wipe the dirt off the lens of as it will go. The blade clamp sleeve rotates and fixes the lamp. Be careful not to scratch the lens of lamp, or the recipro saw blade. Make sure that the recipro saw it may lower the illumination. -
Page 8: Operation
You can use both jig saw blades (B type) and recipro saw blades according to your work. Insert the recipro/ jig saw blade straight into the blade clamp and tighten it by hex wrench. Pull the recipro/jig saw blade lightly to make sure that the recipro/jig saw blade does not fall off during operation. To remove the recipro/jig saw blade, follow the installa- tion procedure in reverse. Hex wrench storage ► 1 . Recipro saw blade 2. Hex wrench 3. Hole for recipro saw blade 4. Blade clamp To install the recipro/jig saw blade, loosen the bolt by hex wrench. -
Page 9: Maintenance
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Press the shoe firmly against the workpiece. Do not Centers, always using Makita replacement parts. allow the tool to bounce. Bring the recipro saw blade into light contact with the workpiece. - Page 10 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885441A225 www.makita.com 20171003...